Серия Интерфейс CAN TD5(3)01DCANH-W

Mornsun

Общие характеристики

 Раздел Интерфейс CAN
Кол-во каналов передачи данных
Диапазон рабочих температур

Документация на серию TD5(3)01DCANH-W

Industrial Bus TD5(3)01DCANH-W Series Wakeable high-speed CAN isolated transceiver module FEATURES  Comply with ISO11898-2, ISO11898-5 standards  With standby control pin  Ultra-low standby current  With bus dominant timeout protection  With remote wake-up function  Two-port isolation (3.0kVDC) Report RoHS EN62368-1  Operating ambient temperature range: -40℃ to +105℃  Set isolation and ESD bus protection in one The TD301DCANH-W/ TD501DCANH-W series’ main function is to convert TTL / CMOS level into isolated CAN bus differential level signals. The use of IC integrated technology allows for power isolation, signal isolation, CAN transceiver and bus protection all in one single CAN bus transceiver module, which withstands an isolation test voltage of 3000VDC. Also, they can easily be embedded in the user’s end equipment, to achieve fully functional CAN bus network connectivity. The internal intermittent working design makes the product series have extremely low power consumption in standby mode, which is suitable for occasions with special requirements for low power consumption. Selection Guide Part No. Power input (VDC) TD301DCANH-W 3.3 TD501DCANH-W 5 Certificati on EN Stand-by current（mA） （Typ.） Baud rate (bps) Static Current (mA) (Typ.) Maximum Operating Current (mA) Bus Maximum Voltage (VDC) Number of Nodes 1.5 40K-1M 18 90 ±40 110 1.5 40K-1M 20 100 ±40 110 Absolute Limits Item Input Surge Voltage (1sec.max.) Operating Conditions Min. Typ. Max. 3.3V series -0.7 -- 5 5.0V series -0.7 -- 7 -- -- 300 ℃ Unit Soldering spot 1.5mm away from case, 10s max. Pin Soldering Temperature Unit VDC 3.3V Input Specifications Item Symbol Min. Typ. Max. Power Supply Input Voltage VCC 3.15 3.3 3.45 High-level VIH 0.7VCC -- VCC+0.5 Low-level VIL 0 -- 0.3VCC High-level VOH VCC-0.4 VCC-0.2 -- Low-level VOL 0 0.2 0.4 TXD Drive Current IT 2 -- -- RXD Output Current IR -- -- 2 Serial Interface Standard CAN controller interface for +3.3V TXD Logic Level RXD Logic Level VDC mA 5.0V Input Specifications Item Symbol Min. Typ. Max. Power Supply Input Voltage VCC 4.75 5 5.25 TXD Logic Level RXD Logic Level TXD Drive Current High-level VIH 0.7VCC -- VCC+0.5 Low-level VIL 0 -- 0.3VCC High-level VOH VCC-0.4 VCC -0.2 -- Low-level VOL 0 0.2 0.4 IT 2 -- -- 2022.04.2-A/4 Unit VDC mA Page 1 of 7 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation PDF
Документация на TD301DCANH-W 

TD5(3)01DCANH-W Keywords:

Дата модификации: 02.04.2022

Размер: 1.34 Мб

7 стр.

    Товары серии TD5(3)01DCANH-W

    Наименование i Упаковка U пит
    TD301DCANH-W (MORNSUN)
     
     
    TD501DCANH-W (MORNSUN)