Серия Интерфейс CAN TD5(3)01MCAN

Mornsun

Общие характеристики

 Раздел Интерфейс CAN
Корпус DIP-8 DIP7
Кол-во каналов передачи данных
Диапазон рабочих температур

Документация на серию TD5(3)01MCAN

Industrial Bus TD5(3)01MCAN Series Single high-speed CAN isolated transceiver module in compact DIP8 size package RoHS FEATURES        Two-port isolation test voltage(2.5kVDC) High baud rate of up to 1 Mbps Operating ambient temperature range: -40℃ to +105℃ Complies with ISO 11898-2 standard Bus timeout protection The bus supports maximum 110 nodes Compact size, standard DIP8 package EN62368-1 The TD301MCAN / TD501MCAN series’ main function is to convert TTL / CMOS level into isolated CAN bus differential level signals. The use of IC integrated technology allows for power isolation, signal isolation, CAN transceiver and bus protection all in one single CAN bus transceiver module, which withstands an isolation test voltage of 2500VDC. The products is in ultra-small size package, only 40% size of general products, which make it be more easily embedded in the user’s end equipment, to achieve fully functional CAN bus network connectivity. Selection Guide Part No. Power Supply Input (VDC) Baud Rate (bps) Static Current (mA) Maximum Operating Current(mA) Maximum Bus Voltage (VDC) Number of Nodes TD301MCAN 3.3 40k-1M 30 60 ±40 110 TD501MCAN 5 40k-1M 24 50 ±40 110 Certification EN Absolute Limits Item Input Surge Voltage (1sec.max.) Pin Soldering Resistance Temperature Operating Conditions Min. Typ. Max. 3.3V series -0.7 -- 5 5.0V series -0.7 -- 7 -- -- 300 ℃ Min. Typ. Max. Unit Soldering spot is 1.5mm away from the case, 10 seconds max. Unit VDC 3.3V series Input Specifications Item Symbol Power Supply Input Voltage TXD Logic Level RXD Logic Level VCC 3.15 3.3 3.45 High-level VIH 0.7Vcc -- Vcc Low-level VIL 0 -- 0.8 High-level VOH Vcc-0.4 3.1 -- Low-level VOL -- 0.2 0.4 TXD Drive Current IT 2 -- -- RXD Output Current IR -- -- 10 Serial Interface Standard CAN controller interface for +3.3V. Typ. Max. VDC mA 5.0V series Input Specifications Item Symbol Power Supply Input Voltage TXD Logic Level RXD Logic Level Min. VCC 4.75 5 5.25 High-level VIH 0.7Vcc -- Vcc Low-level VIL 0 -- 0.8 High-level VOH Vcc-0.4 4.8 -- Low-level 0.4 VOL -- 0.2 TXD Drive Current IT 2 -- -- RXD Output Current IR -- -- 10 Serial Interface Standard CAN controller interface for both +5.0V. 2021.08.31-A/7 Unit VDC mA Page 1 of 5 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation PDF
Документация на TD301MCAN 

TD5(3)01MCAN Keywords:

Дата модификации: 29.12.2021

Размер: 1.17 Мб

5 стр.

Industrial Bus TD5(3)01MCAN Series Single high-speed CAN isolated transceiver module in compact DIP8 size package RoHS FEATURES        Two-port isolation test voltage(2.5kVDC) High baud rate of up to 1 Mbps Operating ambient temperature range: -40℃ to +105℃ Complies with ISO 11898-2 standard Bus timeout protection The bus supports maximum 110 nodes Compact size, standard DIP8 package EN62368-1 The TD301MCAN / TD501MCAN series’ main function is to convert TTL / CMOS level into isolated CAN bus differential level signals. The use of IC integrated technology allows for power isolation, signal isolation, CAN transceiver and bus protection all in one single CAN bus transceiver module, which withstands an isolation test voltage of 2500VDC. The products is in ultra-small size package, only 40% size of general products, which make it be more easily embedded in the user’s end equipment, to achieve fully functional CAN bus network connectivity. Selection Guide Part No. Power Supply Input (VDC) Baud Rate (bps) Static Current (mA) Maximum Operating Current(mA) Maximum Bus Voltage (VDC) Number of Nodes TD301MCAN 3.3 40k-1M 30 60 ±40 110 TD501MCAN 5 40k-1M 24 50 ±40 110 Certification EN Absolute Limits Item Input Surge Voltage (1sec.max.) Pin Soldering Resistance Temperature Operating Conditions Min. Typ. Max. 3.3V series -0.7 -- 5 5.0V series -0.7 -- 7 -- -- 300 ℃ Min. Typ. Max. Unit Soldering spot is 1.5mm away from the case, 10 seconds max. Unit VDC 3.3V series Input Specifications Item Symbol Power Supply Input Voltage TXD Logic Level RXD Logic Level VCC 3.15 3.3 3.45 High-level VIH 0.7Vcc -- Vcc Low-level VIL 0 -- 0.8 High-level VOH Vcc-0.4 3.1 -- Low-level VOL -- 0.2 0.4 TXD Drive Current IT 2 -- -- RXD Output Current IR -- -- 10 Serial Interface Standard CAN controller interface for +3.3V. Typ. Max. VDC mA 5.0V series Input Specifications Item Symbol Power Supply Input Voltage TXD Logic Level RXD Logic Level Min. VCC 4.75 5 5.25 High-level VIH 0.7Vcc -- Vcc Low-level VIL 0 -- 0.8 High-level VOH Vcc-0.4 4.8 -- Low-level 0.4 VOL -- 0.2 TXD Drive Current IT 2 -- -- RXD Output Current IR -- -- 10 Serial Interface Standard CAN controller interface for both +5.0V. 2021.08.31-A/7 Unit VDC mA Page 1 of 5 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation PDF
Документация на TD301MCAN 

Subject:

Дата модификации: 08.09.2021

Размер: 1.17 Мб

5 стр.

Industrial Bus TD5(3)01MCAN Series Single high-speed CAN isolated transceiver module in compact DIP8 size package RoHS FEATURES         Two-port isolation test voltage(2.5kVDC) High baud rate of up to 1 Mbps Operating ambient temperature range: -40℃ to +105℃ Complies with ISO 11898-2 standard Bus timeout protection The bus supports maximum 110 nodes Compact size, standard DIP8 package EN60950 approval The TD301MCAN / TD501MCAN series’ main function is to convert TTL / CMOS level into isolated CAN bus differential level signals. The use of IC integrated technology allows for power isolation, signal isolation, CAN transceiver and bus protection all in one single CAN bus transceiver module, which withstands an isolation test voltage of 2500VDC. The products is in ultra-small size package, only 40% size of general products, which make it be more easily embedded in the user’s end equipment, to achieve fully functional CAN bus network connectivity. Selection Guide Part No. Power Supply Input (VDC) Baud Rate (bps) Static Current (mA) Maximum Operating Current(mA) Maximum Bus Voltage (VDC) Number of Nodes TD301MCAN 3.3 40k-1M 30 60 ±58 110 TD501MCAN 5 40k-1M 24 50 ±58 110 Certification CE Absolute Limits Item Input Surge Voltage (1sec.max.) Pin Soldering Resistance Temperature Operating Conditions Min. Typ. Max. 3.3V series -0.7 -- 5 5.0V series -0.7 -- 7 -- -- 300 ℃ Unit Soldering spot is 1.5mm away from the case, 10 seconds max. Unit VDC 3.3V series Input Specifications Item Symbol Min. Typ. Max. Power Supply Input Voltage VCC 3.15 3.3 3.45 High-level VIH 0.7Vcc -- Vcc Low-level VIL 0 -- 0.8 High-level VOH Vcc-0.4 3.1 -- Low-level VOL -- 0.2 0.4 TXD Drive Current IT 2 -- -- RXD Output Current IR -- -- 10 Serial Interface Standard CAN controller interface for +3.3V. Typ. Max. TXD Logic Level RXD Logic Level VDC mA 5.0V series Input Specifications Item Symbol Power Supply Input Voltage TXD Logic Level RXD Logic Level VCC High-level VIH Low-level VIL High-level VOH Low-level VOL Min. 4.75 5 5.25 0.7Vcc -- Vcc 0 -- 0.8 Vcc-0.4 4.8 -- -- 0.2 0.4 TXD Drive Current IT 2 -- -- RXD Output Current IR -- -- 10 Serial Interface Standard CAN controller interface for both +5.0V. 2019.11.21-A/5 Unit VDC mA Page 1 of 4 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation PDF
Документация на серию TD5(3)01MCAN 

Subject:

Дата модификации: 29.11.2019

Размер: 1.3 Мб

4 стр.

    Товары серии TD5(3)01MCAN

    Наименование i Упаковка U пит
    TD301MCAN (MORNSUN)
     
    		в линейках 100 шт
    TD501MCAN (MORNSUN)
     
    		в линейках 100 шт