Серия DC-DC модульных преобразователей URA1D_(X)LMD-10WR3

Mornsun

Общие характеристики

 Раздел DC-DC модульные преобразователи
Монтаж
Выходная мощность
Количество каналов
Входное напряжение
Параметры выходов
Возможности
Комплекс защит
Номинальное входное напряжение
Напряжение 1 выхода
Напряжение 2 выхода
Ток 1 выхода
Ток 2 выхода
КПД
Напряжение изоляции вход-выход
Размер 50.8×25.4×11.8 мм
Рабочая температура

Документация на серию URA1D_(X)LMD-10WR3

DC/DC Converter URA1D_(X)LMD-10WR3 Series FEATURES 10W isolated DC-DC converter Ultra-wide input and regulated dual output        Patent Protection Report Report EN62368-1   RoHS Ultra-wide input voltage range: 40VDC-160VDC No-load power consumption as low as 0.3W Reinforced I/O isolation test voltage 2.25k VDC Operating ambient temperature range: -40℃ to +85℃ Input under-voltage protection, output short circuit, over-current, over–voltage protection Meets EN50121-3-2 & CISPR32/EN55032 CLASS A, without extra components Approved EN50155 requirements for railway applications Designed to meet IEC62368 safety standard Industry standard pin-out BS EN62368-1 URA1D_(X)LMD-10WR3 series of isolated 10W DC-DC converter products with an ultra-wide input voltage from 40VDC to 160VDC and feature efficiencies of up to 84%, input to output isolation is tested with 2250VDC and the converter safety operate ambient temperature of -40 ℃ to +85℃, input under-voltage protection, output short-circuit, over-voltage, over-current protection. ”XLMD” means product without Ctrl pin, “LMD” means product with Ctrl pin and they are widely used in railway vehicle applications using 72V, 96V and 110V battery voltages. Selection Guide Input Voltage (VDC) Certification Part No. ① Nominal (Range) URA1D05(X)LMD-10WR3 EN/BS EN URA1D12(X)LMD-10WR3 URA1D15(X)LMD-10WR3 110 (40-160) ② Max. 170 Output Voltage (VDC) Current (mA) Max./Min. Full Load Efficiency (%) Min./Typ. Capacitive Load (µF)Max. ±5 ±1000/0 78/80 1000 ±12 ±417/0 82/84 470 ±15 ±334/0 82/84 330 Note: ①”X” means product without Ctrl pin and no certification ; ②Exceeding the maximum input voltage may cause permanent damage. Input Specifications Item Min. Typ. Max. ±5VDC output -- 113/3 117/8 ±12VDC, ±15VDC output -- 108/3 111/8 -- 25 -- -0.7 -- 180 -- -- 40 28 33 -- -- 10 Operating Conditions Input Current (full load / no-load) Nominal input voltage Reflected Ripple Current Nominal input voltage Surge Voltage (1sec. max.) Start-up Voltage Shut-down Voltage Start-up Time Nominal input voltage & constant resistance load mA VDC ms Pi filter Input Filter Module on Ctrl * -- Unit Ctrl pin open or pulled high (3.5-12VDC) Module off Ctrl pin pulled low to GND (0-1.2VDC) Input current when off -- Hot Plug 2 7 mA Unit Unavailable Note: *The Ctrl pin voltage is referenced to input GND; URA1D_XLMD series without Ctrl pin. Output Specifications Item Voltage Accuracy Operating Conditions ±5VDC output ±12VDC, ±15VDC output Min. Typ. Max. 5%-100% load -- ±1 ±3 0%-5% load -- ±3 ±5 0%-100% load -- ±1 ±3 2022.01.22-A/4 % Page 1 of 6 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation PDF
Документация на серию URA1D_(X)LMD-10WR3 

URA1D_(X)LMD-10WR3 Keywords:

Дата модификации: 27.01.2022

Размер: 1.79 Мб

6 стр.

    Товары серии URA1D_(X)LMD-10WR3

    Наименование i Упаковка
    URA1D15XLMD-10WR3 (MORNSUN)