Серия DC-DC модульных преобразователей VCB48_SBO-10WR3

Общие характеристики

Раздел DC-DC модульные преобразователи
Монтаж
Выходная мощность
Количество каналов
Входное напряжение
Возможности
Комплекс защит КЗ, перегрузка, от пониженного входного напряжения
Номинальное входное напряжение
Схема параллельного включения
Напряжение изоляции вход-выход
Сертификаты медицинские
Размер 33.02×22.9×11.4 мм
Рабочая температура

Документация на серию VCB48_SBO-10WR3

DC/DC Converter VCB48_SBO-10WR3 Series FEATURES 10W isolated DC-DC converter Wide input and regulated single output         Patent Protection RoHS Wide 2:1 input voltage range High efficiency up to 88% I/O isolation test voltage 1.5K VDC Input under-voltage protection, output short-circuit, over-current, over-voltage protection Operating ambient temperature range: -40℃ to +85℃ Industry standard 1/16 brick EN62368 approved Meets UL62368 standard VCB48_SBO-10WR3 series are isolated 10W DC-DC converter products with a 2:1 input voltage range. They feature efficiencies of up to 88%, 1500VDC input to output isolation, operating temperature of -40℃ to +85℃, input under-voltage protection, output over-voltage, over-current and short circuit protection, which is widely used in communication field, such as switches, repeaters, intelligent communication gateways, GPS synchronous clock and 4G/5G base station etc. Selection Guide Input Voltage (VDC) Certification Part No. Nominal (Range) Max. ① Output Voltage (VDC) 5 2000/0 81/83 2200 12 833/0 85/87 470 15 667/0 86/88 330 24 417/0 86/88 100 VCB4805SBO-10WR3 CE VCB4812SBO-10WR3 VCB4815SBO-10WR3 48 (36-75) Full Load Max. Capacitive Efficiency② Load(µF) (%) Min./Typ. Current(mA) Max./Min. 80 VCB4824SBO-10WR3 Notes: 1 Exceeding the maximum input voltage may cause permanent damage; 2 Efficiency is measured at nominal input voltage and rated output load. Input Specifications Item Input Current (full load / no load) Reflected Ripple Current Operating Conditions Nominal input voltage Surge Voltage (1sec. max.) Min. Typ. Max. -- 252/4 258/8 -- 50 -- -0.7 -- 100 Start-up Voltage -- -- 36 Under-voltage Protection 26 29 -- -- -- Start-up Time Nominal input voltage & constant resistance load Input Filter mA VDC ms C filter Hot Plug Ctrl* 100 Unit Unavailable Module on Ctrl pin open or pulled high (TTL 3.5-12VDC) Module off Ctrl pin pulled low to GND (0-1.2VDC) Input current when off -- 6 10 mA Min. Typ. Max. Unit Note: *The Ctrl pin voltage is referenced to input GND. Output Specifications Item Operating Conditions Voltage Accuracy 5%-100% load -- ±1 ±3 Linear Regulation Input voltage variation from low to high at full load -- ±0.2 ±0.5 Load Regulation① 5%-100% load -- ±0.5 ±1 Transient Recovery Time 25% load step change, nominal input voltage -- 300 500 2020.10.17-A/3 % µs Page 1 of 4 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation PDF
Документация на VCB4824SBO-10WR3 

VCB48_SBO-10WR3 Keywords:

Дата модификации: 17.10.2020

Размер: 1.59 Мб

4 стр.

    Товары серии VCB48_SBO-10WR3

    Наименование i Упаковка Выход U1 I1 КПД
    VCB4805SBO-10WR3 (MORNSUN) 13 шт
    VCB4812SBO-10WR3 (MORNSUN) 1 шт
    VCB4815SBO-10WR3 (MORNSUN)
    VCB4824SBO-10WR3 (MORNSUN)