Серия DC-DC модульных преобразователей VCB_QBO_200WR3

Mornsun

Общие характеристики

Раздел DC-DC модульные преобразователи
Монтаж на плату, сквозные отверстия, открытый
Выходная мощность
Количество каналов
Входное напряжение
Возможности открытый, подстройка выхода, Remote Sense, изолированный
Комплекс защит КЗ, перегрузки, от пониженного входного напряжения
Номинальное входное напряжение
Напряжение изоляции вход-выход
Размер 57.9×36.8×10.05 мм
Рабочая температура

Документация на серию VCB_QBO_200WR3

DC/DC Converter VCB48_QBO-200WR3 Series FEATURES 200W isolated DC-DC converter Wide input and regulated single output  Wide 2:1 input voltage range  High efficiency up to 93%  I/O isolation test voltage 1.5k VDC  Operating ambient temperature range: -40℃ to +100℃  Input under-voltage protection, output short circuit, over-current, over–voltage, Patent Protection RoHS over-temperature protection  Industry standard package: 1/4 brick  Meet IEC/UL/EN62368 standards VCB48_QBO-200WR3 series of isolated 200W DC-DC converter products with an wide 2:1 input voltage range. They feature efficiencies of up to 93%, input to output isolation is tested with 1500VDC and the converters safely operate ambient temperature of -40℃ to +100℃, input under-voltage protection, output short circuit, over-current, over-voltage, over-temperature protection. They are ideally and widely used in applications such as industrial control, electric power, instruments and communication fields. Selection Guide Input Voltage (VDC) Certification Part No. Nominal (Range) Max. ① VCB4805QBO-200WR3 -- VCB4812QBO-200WR3 VCB4815QBO-200WR3 48 (36-75) 75 VCB4824QBO-200WR3 Output Voltage (VDC) Current (A) Max./Min. Full Load ② Efficiency (%) Min./Typ. 5 36.00/0 89/91 6000 12 16.67/0 91/93 2000 15 13.33/0 91/93 2000 24 8.33/0 90/92 1000 Max. Capacitive Load(µF) Notes: ① Exceeding the maximum input voltage may cause permanent damage; ② Efficiency is measured in nominal input voltage and rated output load; Input Specifications Item Input Current (full load / no-load) Reflected Ripple Current Operating Conditions Nominal input voltage Surge Voltage (1sec. max.) Start-up Voltage Min. Typ. Max. Unit -- 4579/20 4682/35 -- 30 120 -0.7 -- 80 VDC -- -- 36 VDC mA Start-up Current -- -- 8.8 A Input Under-voltage Protection 26 29 -- VDC -- -- 100 ms Start-up Time Nominal input voltage & constant resistance load Input Filter Pi filter Hot Plug Unavailable Module on Ctrl ① Module off Input current when off Ctrl pin open or pulled high (TTL 3.5-12VDC) Ctrl pin pulled low to GND (0-1.2VDC) -- 3 10 mA Note: ①The Ctrl pin voltage is referenced to input -Vin. 2020.12.21-A/0 Page 1 of 7 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation PDF
Документация на серию VCB_QBO_200WR3 

VCB48_QBO-200WR3 Keywords:

Дата модификации: 30.12.2022

Размер: 2.14 Мб

7 стр.

    Товары серии VCB_QBO_200WR3

    Наименование i Упаковка Выход U1 I1 КПД
    VCB4805QBO-200WR3 (MORNSUN)
     
    VCB4812QBO-200WR3 (MORNSUN)
     
    на поддоне 3 шт
    VCB4815QBO-200WR3 (MORNSUN)
     
    VCB4824QBO-200WR3 (MORNSUN)
     
    2 шт