Серия защитных диодов SMBJ58

Общие характеристики

	Раздел	Защитные диоды
	Рабочее напряжение
	Напряжение ограничения (номинальное)
	Максимальное импульсное напряжение
	Тип супрессора по свойствам

Документация на серию SMBJ58

Transient Voltage Suppressor SMBJ5.0 - SMBJ440CA Features: • • • • • Glass passivated junction Low incremental surge resistance, excellent clamping capability 600W peak pulse power capability with a 10/1,000μs waveform, repetition rate (duty cycle): 0.01% Very fast response time High temperature soldering guaranteed: 250°C/10 secs at terminals Mechanical Data: • • • Case: JEDEC DO-214AA moulded plastic over glass passivated junction Polarity: Foruni-directional types the colour band denotes the cathode, which is positive with respect to the anode under normal TVS operation Weight: 0.0003oz, 0.093g Devices for Bidirectional Applications: For bi-directional deviced, use suffix “C” (eg SMBJ10C, SMBJ10CA). Electrical characteristics apply in both directions. No colour band on bi-directional devices. Maximum Ratings & Characteristics: Ta=25°C Characteristics Symbol Value Unit Peak power dissiation with a 10/1,000μs waveform (Note 1, 2, Fig 1) PPPM Minimum 600 W Peak pulse current with a 10/1,000μs waveform (Note 1) IPPM See table below A Peak forward surge current, 8.3ms single half sine-wave uni- directional only (Note 2) IFSM 100 A Typical thermal resistance, junction to ambient (Note 3) RthJA 100 °C/W Typical thermal resistance, junction to lead RthJL 20 °C/W TJ, TSTG -55 to +150 °C Operational junction and storage temperature range Notes: 1. Non-repetitive current pulses, per Fig.3 and derated above TA=25°C per Fig.2 2. Mounted on 0.2ʺ × 0.2ʺ (5mm × 5mm) copper pads to each terminal 3. Mounted on minimum recommended pad layout www.element14.com www.farnell.com www.newark.com Page <1> 22/08/14 V1.0  PDF

Документация на SMBJ100CA 

Дата модификации: 22.08.2014

Размер: 395.8 Кб

6 стр.

• найти SMBJ58.pdf

Товары серии SMBJ58