Серия DC-DC модульных преобразователей DKE15

Общие характеристики

	Раздел	DC-DC модульные преобразователи
	Монтаж
	Выходная мощность
	Количество каналов
	Возможности
	Комплекс защит	короткого замыкания, перегрузки
	КПД
	Напряжение изоляции вход-выход
	Размер	50.8×50.8×11 мм
	Рабочая температура

Документация на серию DKE15

DKE15 15W DC-DC Regulated Dual Output Converter series Features : 2:1 wide input range 4:1 wide input range ( optional ) 1000VDC I/O isolation Input Pi network filter Protections: Short circuit/ Over load Free air convection Six-sided shield metal case High reliability/ Low cost 100% burn-in test 1 year warranty SPECIFICATION ORDER NO. DKE15A- DKE15B- DKE15C- DKE15A- DKE15B- DKE15C- DKE15A- DKE15B- DKE15C- DKE15A- DKE15B- DKE15C12 05 05 05 12 12 15 15 15 24 24 24 5V 12V 15V 24V DC VOLTAGE 150 ~ 1500mA CURRENT RANGE 60mVp-p 50mVp-p 60mVp-p LINE REGULATION Note.3 0.3% LOAD REGULATION Note.4 0.5% 150KHz min. SWITCHING FREQUENCY VOLTAGE RANGE A: 9 ~ 18VDC EFFICIENCY (Typ.) 81% 83% Full load A: 1700mA B: 800mA C: 400mA No load A: 40mA C: 10mA DC CURRENT FILTER B: 18~36VDC C: 36~72VDC 82% 79% B: 20mA 83% 82% 82% 82% 83% 82% 84% 85% Pi network 160%~250% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed OVER CURRENT PROTECTION (Note. 5) 80mVp-p 2% VOLTAGE ACCURACY INPUT 31.3 ~ 313mA 15W RIPPLE & NOISE (max.) Note.2 OUTPUT 50 ~ 500mA 62.5 ~ 625mA RATED POWER SHORT CIRCUIT All output equipped with short circuit Protection type : Hiccup mode, recovers automatically after fault condition is removed WORKING TEMP. WORKING HUMIDITY -25~+71 (Refer to output load derating curve) 20%~90% RH non-condensing ENVIRONMENT STORAGE TEMP., HUMIDITY -25~+105 , 10~95% RH TEMP. COEFFICIENT 0.03% / ( 0~50 ) VIBRATION 10~500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes SAFETY & WITHSTAND VOLTAGE I/P-O/P:1KVDC I/P-O/P: 100M Ohms / 500VDC ISOLATION RESISTANCE EMC 300khrs min. MIL-HDBK-217F (25 ) MTBF OTHERS DIMENSION 50.8*50.8*11.0mm or 2"*2"*0.43" inch (L*W*H) 65g WEIGHT Derating Curve Pin Configuration Mechanical Specification Unit: mm (inch) 5.6MIN (.22) 1 2 4 5 10.20 10.20 (.402) (.402) 15.2 (.598) 22.8 (.898) 50.8 (.200) 5.10 (.200) 3 Pin no. Output Dual 1 2 3 4 5 + Vi n - Vi n + Vo u t COMMON - Vo u t 11 (0.43) 20.30 (.800) 15.2 (.598) 100 LOAD (%) 50.8 (2.00) 80 BOTTOM VIEW 1.0 + 0.2/-0.1 -25 0 25 50 60 71 Ta ( NOTE 100 ) 1.All parameters are specified at normal input, rated load, 25 70% RH. Ambient. 2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor. 3.Line regulation is measured from low line to high line at rated load. 4.Load regulation is measured from 10% to 100% rated load. 5.Please prevent the converter from operating in overload or short circuit condition for more than 30 seconds. File Name:DKE15-SPEC 2004-01-09

Документация на серию DKE15

DKE15.cdr

Дата модификации: 12.02.2004

Размер: 210.9 Кб

1 стр.

найти DKE15.pdf

Товары серии DKE15

Наименование	i	Упаковка	U вх	Выход	U вх ном.	U1	U2	I1	I2	Шум
DKE15A-05 (MW)
DKE15A-12 (MW)
DKE15A-15 (MW)		в линейках 5 шт
DKE15A-24 (MW)		в линейках 5 шт
DKE15B-05 (MW)
DKE15B-12 (MW)		1 шт
DKE15B-15 (MW)		в линейках 5 шт
DKE15B-24 (MW)		в линейках 5 шт
DKE15C-05 (MW)
DKE15C-12 (MW)		в линейках 5 шт
DKE15C-15 (MW)
DKE15C-24 (MW)