Серия LED-драйверов ELN-60D

Общие характеристики

	Раздел	LED-драйверы
	Тип преобразователя
	Мощность выходная
	Напряжение сети/входное номинальное
	Режим стабилизации
	Тип диммирования
	Исполнение конструктивное
	Степень защиты (IP)
	Подстройка выходных параметров
	Диапазон входных напряжений (AC)
	Диапазон входных напряжений (DC)
	Напряжение изоляции вход-выход
	Количество выходов
	Функция защиты	КЗ, перегрузка, перенапряжение
	Температура рабочая
	Размер	181×61.5×35 мм
	Применение
	Особенности

Документация на серию ELN-60D

60W Single Output Class 2 Switching Power Supply ¡¡E¡½ E ¡E ¡E ¡E ¡E ¡E ¡E ¡E ¡E ¡E ¡E ¡E ELN-60 series Features : Universal AC input / Full range Protections: Short circuit / Over current / Over voltage Cooling by free air convection Built-in constant current limiting circuit with adjustable OCP level Optional dimming function : 1~10VDC (D type) or PWM (P type) controlled Fully isolated plastic case with IP64 level Class power unit, no FG Class 2 power unit Pass LPS Suitable for LED lighting and moving sign applications (Note.9) 100% full load burn-in test Low cost, high reliability 2 years warranty ¢º SPECIFICATION MODEL DC VOLTAGE ( for 48V only) ( except for 48V ) ELN-60-9 ELN-60-12 ELN-60-15 ELN-60-24 ELN-60-27 ELN-60-48 9V 12V 15V 24V 27V 48V 6 ~ 12V 7.5 ~ 15V 12 ~ 24V 13.5 ~ 27V 24 ~ 48V 2.5A 2.3A 1.3A LED OPERATION VOLTAGE Note.8 3 ~ 9V RATED CURRENT 5A 5A 4A CURRENT RANGE 0 ~ 5A 0 ~ 5A 0 ~ 4A 0 ~ 2.5A 0 ~ 2.3A 0 ~ 1.3A RATED POWER 45W 60W 60W 60W 62.1W 62.5W 120mVp-p 150mVp-p 150mVp-p 200mVp-p 250mVp-p 10.8 ~ 13.2V 13.5 ~ 16.5V 21.6 ~ 26.4V 24.3 ~ 29.7V 43.2 ~ 52.8V 87% 87% 88% RIPPLE & NOISE (max.) Note.2 120mVp-p OUTPUT LPS IP64 VOLTAGE ADJ. RANGE Note.7 8.7 ~ 10.5V Can be adjusted by internal potentiometer SVR1 CURRENT ADJ. RANGE Note.7 -25% ~ 3%. Can be adjusted by internal potentiometer SVR2 VOLTAGE TOLERANCE Note.3 LINE REGULATION LOAD REGULATION SETUP, RISE TIME Note.6 500ms, 30ms / 230VAC 50ms/230VAC HOLD UP TIME (Typ.) VOLTAGE RANGE INPUT ¡Ó5.0% Ó¡ 1.0% Ó¡ 2.0% Note.4 90 ~ 264VAC FREQUENCY RANGE 47 ~ 63Hz EFFICIENCY (Typ.) 82% AC CURRENT (Typ.) INRUSH CURRENT (max.) 1.2A/115VAC LEAKAGE CURRENT OVER CURRENT PROTECTION OVER VOLTAGE 1500ms, 30ms / 115VAC at full load 16ms/115VAC at full load 127 ~ 370VDC 85% 86% 0.7A/230VAC £g COLD START 60A(twidth=600 s measured at 50% Ipeak) at 230VAC 0.25mA / 240VAC 95 ~ 110% Protection type : Constant current limiting, recovers automatically after fault condition is removed 11 ~ 13.5V 13.8 ~ 16V 17.5 ~ 21V 28 ~ 32V 31 ~ 37V 54 ~ 60V Protection type : Shut down o/p voltage, re-power on to recover FUNCTION DIMMING CONTROL (OPTIONAL) 1 ~ 10VDC or PWM signal : 100Hz ~ 3KHz WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT SAFETY & EMC ¢J ¡Ó0.03%/¢J (0 ~ 50¢J) -40 ~ +80 , 10 ~ 95% RH 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes SAFETY STANDARDS UL1310, CAN/CSA C22.2 No. 223-M91(except for 48V), IP64 approved ; design refer to TUV EN60950-1 WITHSTAND VOLTAGE I/P-O/P:3KVAC ISOLATION RESISTANCE I/P-O/P:>100M Ohms / 500VDC / 25 / 70% RH Compliance to EN55022 (CISPR22) Class B, EN61000-3-2 Class A, EN61000-3-3 EMC EMISSION DIMENSION PACKING NOTE 20 ~ 90% RH non-condensing VIBRATION EMC IMMUNITY MTBF OTHERS ¢J (Refer to "Derating Curve") -20 ~ +60 ¢J Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level, criteria A ¢J 603K hrs min. MIL-HDBK-217F (25 ) 181*61.5*35mm (L*W*H) 0.4Kg; 24pcs/11Kg/0.75CUFT ¢J 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Derating may be needed under low input voltage. Please check the static characteristics for more details. 5. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. 6. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time. 7. Output voltage can be adjusted through the SVR1 on the PCB ; limit of output constant current level can be adjusted through the SVR2 on the PCB. 8. Constant current operation region is within the specified output voltage range above. This is the suitable operation region for LED related applications. 9. The unit might not be suitable for lighting applications in EU countries. Please check with your local authorities for the possible use of the unit. File Name:ELN-60-SPEC 2012-12-26

Документация на серию ELN-60D

ELN-60.cdr Keywords:

Дата модификации: 09.01.2013

Размер: 104.4 Кб

3 стр.

найти ELN-60D.pdf

Товары серии ELN-60D

Наименование	i	Упаковка	Напряжение выходное	Ток выходной	Эффективность
ELN-60-12D (MW)		1 шт
ELN-60-15D (MW)		1 шт
ELN-60-24D (MW)		1 шт
ELN-60-27D (MW)		1 шт
ELN-60-48D (MW)		1 шт
ELN-60-9D (MW)		1 шт