Серия AC-DC сетевых преобразователей EPS-45C

Общие характеристики

	Раздел	AC-DC сетевые преобразователи
	Тип стабилизации
	Вход
	Возможности	компактный дизайн, базовая модель
	Типы защиты	КЗ, перегрузка, перенапряжение
	Количество выходов
	Тип управления выходом
	Исполнение
	Входное напряжение AC
	Входное напряжение DC
	Напряжение изоляции вход-выход
	Напряжение изоляции вход-земля
	Напряжение изоляции выход-земля
	Применение
	Размер	103×62×37 мм
	Рабочая температура

Документация на серию EPS-45C

EPS-45 45W Single Output Switching Power Supply ■ Features : Universal AC input / Full range Optional L-Bracket and cover High efficiency up to 90% Protections: Short circuit / Overload / Over voltage Cooling by free air convection 4×2" compact size LED indicator for power on No load power consumption<0.3W Operating altitude up to 4000 meters 3 years warranty series User’s Manual Bauar t gepruft Sicherheit egel ma ge od o s be wac g www. tuv.com ID 2000000000 UL62368-1 EPS-45-3.3 -C BS EN/EN62368-1 TPTC004 IEC62368-1 =Blank,-C ; Blank=PCB only, -C=Enclosed type SPECIFICATION MODEL EPS-45-3.3 EPS-45-36 EPS-45-48 36V 48V 3.3V 5V 7.5V 15V 8A 8A 5.4A 3.75A 3A 1.9A 1.25A 1A CURRENT RANGE 0 ~ 9A 0 ~ 9A 0 ~ 6A 0 ~ 4.2A 0 ~ 3.3A 0 ~ 2.1A 0 ~ 1.4A 0 ~ 1.1A RATED POWER 26.4W 40W 40.5W 45W 45W 45.6W 45W 48W Note.6 29.7W 45W 42W 50.4W 49.5W 50.4W 50.4W 52.8W RIPPLE & NOISE (max.) Note.2 80mVp-p 80mVp-p 100mVp-p 120mVp-p 150mVp-p 240mVp-p 280mVp-p 300mVp-p VOLTAGE ADJ. RANGE 3.1 ~ 3.6V VOLTAGE TOLERANCE Note.3 ±3.0% 4.75 ~ 5.5V ±2.0% 7.13 ~ 8.25V ±2.0% 10.8 ~ 13.5V ±2.0% 13.5 ~ 16.5V ±2.0% 21.6 ~ 27V ±1.0% 32.4 ~ 39.6V ±1.0% 43.2 ~ 52.8V ±1.0% LINE REGULATION ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% LOAD REGULATION ±2.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% SETUP, RISE TIME 1000ms, 50ms/230VAC 2000ms, 50ms/115VAC at full load 50ms/230VAC 16ms/115VAC at full load 89% 90% 39.7 ~ 46.8V 53.3 ~ 64.8V Note.5 90 ~ 264VAC 127 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz EFFICIENCY (Typ.) 80% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 1.8A/115VAC COLD START 60A/230VAC LEAKAGE CURRENT <2mA/240VAC PROTECTION OVER VOLTAGE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT OPERATING ALTITUDE Note.7 VIBRATION SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE EMC ISOLATION RESISTANCE EMC EMISSION EMC IMMUNITY MTBF DIMENSION PACKING NOTE EPS-45-24 RATED CURRENT OVER LOAD OTHERS EPS-45-15 DC VOLTAGE VOLTAGE RANGE (Note 4) EPS-45-12 24V HOLD UP TIME (Typ.) INPUT EPS-45-7.5 12V PEAK LOAD(10sec.) OUTPUT EPS-45-5 82% [DC input operation possible by connecting AC/N(+), AC/L(-)] 84% 87% 88% 89% 1 A/230VAC 115 ~ 160% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed 3.7 ~ 4.45V 5.6 ~ 6.75V 8.63 ~ 10.1V 13.8 ~ 16.2V 17.25 ~ 20.25V 27.6 ~ 32.4V Protection type : Shut down o/p voltage, re-power on to recover -30 ~ +70℃ (Refer to output load derating curve) 20 ~ 90% RH non-condensing -40 ~ +85℃, 10 ~ 95% RH ±0.03%/℃ (0 ~ 50℃) 4000 meters 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes UL62368-1, TUV BS EN/EN62368-1, EAC TP TC 004 approved I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH Compliance to BS EN/EN55032 (CISPR32) Class B, BS EN/EN61000-3-2,-3, EAC TP TC 020 Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN55024, heavy industry level, criteria A, EAC TP TC 020 652.3Khrs min. MIL-HDBK-217F (25℃) PCB:101.6*50.8*29mm (L*W*H) ; with optional CASE:103.4*62*37mm (L*W*H) PCB: 0.14Kg; 96pcs/ 14.5Kg/1.39CUFT ; with optional CASE: 0.3Kg; 45pcs/ 14.5Kg/0.63CUFT 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Derating may be needed under low input voltage. Please check the static characteristics for more details. 5. 33% Duty cycle maximum within every 30 seconds. Average output power should not exceed the rated power. 6. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on a 360mm*360mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on http://www.meanwell.com) 7. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft). ※ Product Liability Disclaimer：For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx File Name:EPS-45-SPEC 2021-09-15

Документация на EPS-45-7.5-C

EPS-45-20210915.cdr

Дата модификации: 23.09.2021

Размер: 143.7 Кб

3 стр.

Документация на серию EPS-45C

EPS-45-20120808曲?.cdr

Дата модификации: 08.08.2012

Размер: 817.1 Кб

3 стр.

найти EPS-45C.pdf

Товары серии EPS-45C

Наименование	i	Упаковка	P вых	Выход	U1	I1	Конструктив	Коэф. мощн.	КПД	Шум
EPS-45-12-C (MW)		1 шт
EPS-45-15-C (MW)		1 шт
EPS-45-24-C (MW)		1 шт
EPS-45-3.3-C (MW)		1 шт
EPS-45-36 (MW)		1 шт
EPS-45-36-C (MW)		1 шт
EPS-45-48-C (MW)		1 шт
EPS-45-5-C (MW)		1 шт
EPS-45-7.5-C (MW)		1 шт