Серия AC-DC сетевых преобразователей GE18I

Общие характеристики

Раздел AC-DC сетевые преобразователи
Тип стабилизации
Вход
Конструктивное исполнение
Возможности
Типы защиты КЗ, перегрузка, перенапряжение
Количество выходов
Тип управления выходом
Исполнение
Входное напряжение AC
Входное напряжение DC
Применение
Размер 81×43×40.5 мм
Рабочая температура

Документация на серию GE18I

GE18 18W AC-DC Interchangeable Industrial Adaptor series ■ Features : Interchangeable AC plugs (plug kit sold separately) Universal AC input / Full range No load power consumption< 0.075W Energy efficiency Level Ⅵ Comply with EISA 2007/DoE and EU ErP Class II power (without earth pin) Protections: Short circuit / Overload / Over voltage Pass LPS Fully enclosed plastic case LED indicator for power on 2 years warranty Interchangeable AC plug specifically for GE series TYPE ORDER NO. Australian type U.K type European type US type Mix four type AC plug-AU AC plug-UK AC plug-EU AC plug-US AC plug-MIX SPECIFICATION DC VOLTAGE OUTPUT I I I I I I I I I I I I I I I I I I GE18 I 07 GE18 I 09 GE18 I 12 GE18 I 15 GE18 I 18 GE18 I 24 GE18 I 48 7.5V 9V 12V 15V 18V 24V 48V 0.375A RATED CURRENT 2.4A 1.73A 2.0A 1.5A 1.2A 1.0A 0.75A CURRENT RANGE 0 ~ 2.4A 0 ~ 1.73A 0 ~ 2.0A 0 ~ 1.5A 0 ~ 1.2A 0 ~ 1.0A 0 ~ 0.75A 0 ~ 0.375A RATED POWER (max.) 12W 13W 18W 18W 18W 18W 18W 18W RIPPLE & NOISE (max.) Note.3 50mVp-p 75mVp-p 100mVp-p 120mVp-p 150mVp-p 180mVp-p 240mVp-p 300mVp-p VOLTAGE TOLERANCE Note.4 ±5.0% ±5.0% ±5.0% ±3.0% ±3.0% ±3.0% ±3.0% ±3.0% LINE REGULATION Note.5 ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% LOAD REGULATION Note.6 ±5.0% ±5.0% ±5.0% ±3.0% ±3.0% ±3.0% ±3.0% ±3.0% 87% 87% 87% SETUP, RISE, HOLD UP TIME 4000ms, 100ms, 30ms / 230VAC Note.7 90 ~ 264VAC VOLTAGE RANGE 135 ~ 370VDC FREQUENCY RANGE INPUT I I I I I I GE18 I 05 Note.2 5V I I I I SAFETY MODEL NO. I I I I POWER SUPPLY MAIN BODY ORDER NO. GE18 I 05-P1J GE18 I 07-P1J GE18 I 09-P1J GE18 I 12-P1J GE18 I 15-P1J GE18 I 18-P1J GE18 I 24-P1J GE18 I 48-P1J 4000ms, 100ms, 10ms / 115VAC at full load 47 ~ 63Hz EFFICIENCY (Typ.) 80.5% AC CURRENT 0.7A / 100VAC INRUSH CURRENT (max.) COLD START 40A / 100VAC LEAKAGE CURRENT (max.) 0.25mA / 240VAC 110% ~ 200% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed 115% ~ 135% rated output voltage OVERLOAD PROTECTION OVER VOLTAGE 82.5% 85% 86% 86.5% 0.4A / 230VAC 80A / 230VAC Protection type : Clamp by zener diode WORKING TEMP. -10 ~ +50℃ (Refer to "Derating Curve") WORKING HUMIDITY 20% ~ 90% RH non-condensing ENVIRONMENT STORAGE TEMP., HUMIDITY -20 ~ +85℃, 10 ~ 95% RH TEMP. COEFFICIENT ±0.03% / ℃ (0 ~ 30℃) 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes VIBRATION SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE EMC ISOLATION RESISTANCE (Note. 8) EMC EMISSION EMC IMMUNITY LIFE OTHERS I/P-O/P:4242VDC I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH Compliance to EN55032, EN61000-3-2,3, FCC part15, GB9254 class B, GB17625.1 Compliance to EN61000-4-2,3,4,5,6,8,11, light industry level, criteria A 2 years : 100% load 30℃, 8 hours / day MIL-HDBK-217F (25℃) MTBF 100Khrs min. DIMENSION PACKING 81*43*40.5mm (L*W*H) 134g ; 50pcs / 8.4kg / CARTON DC OUTPUT PLUG CONNECTOR CABLE NOTE UL60950-1, CSA C22.2, TUV EN60950 -1, AS/NZS 60950.1, CCC GB4943 approved See page 2 ; Other type available by customer requested See page 2 ; Other type available by customer requested 1.All parameters are specified at 230VAC input, rated load, 25℃ 70% RH ambient. 2.DC voltage: The output voltage set at point measure by plug terminal & 50% load. 3.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor. 4.Tolerance: includes set up tolerance, line regulation, load regulation. 5.Line regulation is measured from low line to high line at rated load. 6.Load regulation is measured from 10% to 100% rated load 7.Derating may be needed under low input voltage. Please check the derating curve for more details. 8.The power supply is considered as an independent unit, but the final equipment still need to re-confirm that the whole system complies with the EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on http://www.meanwell.com) 9.Main body unit and AC inlet plug should be ordered separately ; it needs to be used along with any of the AC inlet plug. File Name:GE18-SPEC 2017-08-07 PDF
Документация на серию GE18I 

GE18.cdr

Дата модификации: 07.08.2017

Размер: 132.5 Кб

2 стр.

    Товары серии GE18I

    Наименование i Упаковка P вых Выход U1 I1 Коэф. мощн. КПД Шум
    GE18I05-P1J (MW) 1 шт
    GE18I18-P1J (MW)
    GE18I48-P1J (MW)