Серия LED-драйверов HBG-100A

Общие характеристики

	Раздел	LED-драйверы
	Тип преобразователя
	Напряжение сети/входное номинальное
	Режим стабилизации
	Тип диммирования
	Исполнение конструктивное
	Диапазон входных напряжений (AC)
	Диапазон входных напряжений (DC)
	Напряжение изоляции вход-выход
	Количество выходов
	Коэффициент мощности
	Функция защиты	КЗ, перегрузка, перенапряжение, перегрев
	Температура рабочая
	Размер	130×130×66.5 мм
	Применение
	Особенности

Документация на серию HBG-100A

H B G - 1 0 0 series 100W Constant Current Mode LED Driver User’s Manual IS 15885(Part 2/Sec13)   (for DA Type only) IP65 IP67  ■  ‧ ‧Ⅰ ‧ ‧ ‧ THOMAS SAMUEL THOMAS SAMUEL R-41027766  (for 36A,48A,60A only) ■  ‧ ‧ ‧ ‧   ‧ ‧ ■     ℃℃    ■              A                      File Name:HBG-100-SPEC 2021-08-23

PDF

Документация на HBG-100-60DA

HBG-100.cdr

Дата модификации: 26.08.2021

Размер: 2.18 Мб

9 стр.

H B G - 1 0 0 series 100W Single Output Switching Power Supply ■ Features : ‧Universal AC input / Full range (up to 305VAC) ‧Built-in active PFC function ‧High efficiency up to 91.5% ‧Protections: Short circuit / Over current / Over voltage / Over temperature ‧OCP point adjustable through internal potentiometer ‧IP67 / IP65 design for indoor or outdoor installations ‧Suitable for dry / damp / wet locations ‧5 years warranty, Tc70℃ 40000hrs F HBG-100-60 A 110 SELV IP65 IP67 Blank : IP67 rated. Cable for I/O connection. A : IP65 rated. Output constant current level can be adjusted through internal potentiometer. B : IP67 rated. output constant current lever can be adjusted through output cable with 1-10V,PWM signal and Resistance E(option) : IP67 rated. Can be fixed by steel support. SPECIFICATION MODEL DC VOLTAGE HBG-100-24 HBG-100-36 HBG-100-48 HBG-100-60 24V 36V 48V 60V 21.6 ~ 36V 28.8 ~ 48V 36 ~ 60V 2.7A 2A 1.6A 97.2W 96W 96W 300mVp-p 300mVp-p 300mVp-p 1.2 ~ 2A 1.0 ~ 1.6A CONSTANT CURRENT REGION Note.4 14.4 ~ 24V 4A 96W RATED CURRENT RATED POWER RIPPLE & NOISE (max.) Note.2 200mVp-p OUTPUT CURRENT ADJ. RANGE Note.4 Can be adjusted by internal potentiometer A type only 2.4 ~ 4A 1.62 ~ 2.7A VOLTAGE TOLERANCE Note.3 ±2.0% ±0.5% LINE REGULATION ±1.0% LOAD REGULATION SETUP, RISE TIME Note.6 2000ms, 80ms / 115VAC at full load HOLD UP TIME (Typ.) VOLTAGE RANGE INPUT 12ms at full load Note.5 90 ~ 305VAC 47 ~ 63Hz POWER FACTOR (Typ.) PF>0.96/115VAC, PF>0.96/230VAC, PF>0.94/277VAC at full load (Please refer to "Power Factor Characteristic" curve) EFFICIENCY (Typ.) 90.5% 1.1A / 115VAC AC CURRENT (Typ.) MAX.LED DRIVE NUMBER ON MCB C TYPE 16A LEAKAGE CURRENT OVER CURRENT Note.4 COLD START 60A(twidth=415μs measured at 50% Ipeak) at 230VAC 95 ~ 108% Protection type : Constant current limiting 41 ~ 49V 28 ~ 35V 54 ~ 63V -40 ~ +60℃ (Refer to "Derating Curve") 20 ~ 95% RH non-condensing -40 ~ +80℃, 10 ~ 95% RH ±0.03%/℃ (0 ~ 50℃) VIBRATION 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes SAFETY STANDARDS UL8750,CSA C22.2 No.250.13-12,EN61347-1,EN61347-2-13,EN62384 approved I/P-O/P:3.75KVAC I/P-FG:2.0KVAC O/P-FG:0.5KVAC WITHSTAND VOLTAGE ISOLATION RESISTANCE DIMENSION PACKING 65 ~ 75V Protection type : Shut down o/p voltage re-power on to recovery WORKING TEMP. EMC EMISSION 91.5% 21units@230VAC 95℃±10℃ (RTH2) Protection type : Shut down o/p voltage, re-power on to recovery EMC IMMUNITY MTBF NOTE 91% 0.45A / 277VAC OVER TEMPERATURE WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT OTHERS 91% 0.5A / 230VAC <0.75mA / 277VAC PROTECTION OVER VOLTAGE EMC 127 ~ 431VDC FREQUENCY RANGE INRUSH CURRENT (Typ.) SAFETY & 500ms, 80ms / 230VAC at full load 115VAC/230VAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH Compliance to EN55015, EN61000-3-2 Class C (≧60% load) ; EN61000-3-3 Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, light industry level (surge 4KV), criteria A 300Khrs min. MIL-HDBK-217F (25℃) Refer to mechanical specification 1.1Kg; 12pcs/15.2Kg/1.43CUFT 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Constant current operation region is within 60% ~100% rated output voltage, and the output power must be more than 60% rated output power. This is the suitable operation region for LED related applications, but please reconfirm special electrical requirements for some specific system design. 5. Derating may be needed under low input voltages. Please check the static characteristics for more details. 6. Length of set up time is measured at cold first start. Turning ON/OFF the power supply may lead to increase of the set up time. 7. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. 8. Direct connecting to LEDs is suggested, but is not suitable for using additional drivers. 9.To fulfill requirements of the latest ErP regulation for lighting fixtures, this LED power supply can only be used behind a switch without permanently connected to the mains. File Name:HBG-100-SPEC 2013-12-20

PDF

Документация на серию HBG-100A

HBG-100

Дата модификации: 24.12.2013

Размер: 4.77 Мб

6 стр.

найти HBG-100A.pdf

Товары серии HBG-100A

Наименование	i	Упаковка	Мощность выходная	Напряжение выходное	Ток выходной	Степень защиты (IP)	Тип управления выходом	Эффективность
HBG-100-24 (MW)
HBG-100-24A (MW)
HBG-100-36 (MW)
HBG-100-36A (MW)		на поддоне 6 шт
HBG-100-48 (MW)
HBG-100-48A (MW)		в коробках 12 шт
HBG-100-60 (MW)
HBG-100-60A (MW)		6 шт