Серия LED-драйверов HBG-160B

MEAN WELL

Общие характеристики

 Раздел LED-драйверы
Тип преобразователя
Напряжение сети/входное номинальное
Режим стабилизации
Исполнение конструктивное
Степень защиты (IP)
Подстройка выходных параметров
Диапазон входных напряжений (AC)
Напряжение изоляции вход-выход
Количество выходов
Коэффициент мощности
Функция защиты КЗ, перегрузка, перенапряжение, перегрев
Температура рабочая
Размер 152×152×66.5 мм
Применение
Особенности

Документация на серию HBG-160B

160W Constant Voltage + Constant Current LED Driver H B G - 1 6 0 series User’s Manual Bauar t gepruft Sicherheit egel ma ge od o s be wac g www.tuv.com ID 2000000000 (except for DA Type)    (for DA Type only) (except for DA Type)  IP65 IP67 THOMAS SAMUEL THOMAS SAMUEL R-41027766 (for 36A,48A,48B,60A, 60DA only)   ■  ‧ ‧Ⅰ ‧ ‧ ‧ IS 15885(Part 2/Sec13) (for DA Type only) ■  ‧ ‧ ‧ ‧   ‧ ‧ ■     ℃℃    ■              A                      File Name:HBG-160-SPEC 2021-08-23 PDF
Документация на HBG-160-60DA 

HBG-160.cdr

Дата модификации: 26.08.2021

Размер: 2.28 Мб

9 стр.

H B G - 1 6 0 series 160W Single Output Switching Power Supply ■ Features : ‧Universal AC input / Full range (up to 305VAC) ‧Built-in active PFC function ‧High efficiency up to 93.5% ‧Protections: Short circuit / Over current / Over voltage / Over temperature ‧OCP point adjustable through internal potentiometer ‧IP67 / IP65 design for indoor or outdoor installations ‧Suitable for dry / damp / wet locations ‧5 years warranty, Tc70℃ 40000hrs 110 F HBG-160-60 A M M SELV Bauar t gepruft Sicherheit egel ma ge od o s be wac g IP65 IP67 www.tuv.com ID 2000000000 Blank : IP67 rated. Cable for I/O connection. A : IP65 rated. Output constant current level can be adjusted through internal potentiometer. B : IP67 rated. output constant current lever can be adjusted through output cable with 1-10V,PWM signal and Resistance E(option) : IP67 rated. Can be fixed by steel support. SPECIFICATION MODEL DC VOLTAGE HBG-160-24 HBG-160-36 HBG-160-48 HBG-160-60 24V 36V 48V 60V 21.6 ~ 36V 28.8 ~ 48V 36 ~ 60V CONSTANT CURRENT REGION Note.4 14.4 ~ 24V RATED CURRENT 6.5A 4.4A 3.3A 2.6A RATED POWER 156W 158.4W 158.4W 156W 300mVp-p 300mVp-p 300mVp-p 1.98 ~ 3.3A 1.6 ~ 2.6A RIPPLE & NOISE (max.) Note.2 200mVp-p OUTPUT Can be adjusted by internal potentiometer A type only CURRENT ADJ. RANGE 3.9 ~ 6.5A 2.6 ~ 4.4A VOLTAGE TOLERANCE Note.3 ±2.0% ±0.5% LINE REGULATION ±1.0% LOAD REGULATION SETUP, RISE TIME Note.6 2500ms, 200ms / 115VAC at full load HOLD UP TIME (Typ.) VOLTAGE RANGE INPUT 12ms at full load Note.5 90 ~ 305VAC 47 ~ 63Hz POWER FACTOR (Typ.) PF>0.98/115VAC, PF>0.95/230VAC, PF>0.92/277VAC at full load (Please refer to "Power Factor Characteristic" curve) EFFICIENCY (Typ.) 92% 1.7A / 115VAC AC CURRENT (Typ.) 92% 0.78A / 230VAC 93% 15units@230VAC INRUSH CURRENT (Typ.) COLD START 65A(twidth=425μs measured at 50% Ipeak) at 230VAC <0.75mA / 277VAC Note.4 PROTECTION OVER VOLTAGE OVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION 95 ~ 108% Protection type : Constant current limiting, recovers automatically after fault condition is removed 41 ~ 47V 54 ~ 62V 28 ~ 34V 65 ~ 75V Protection type : Shut down o/p voltage with auto-recovery or re-power on to recovery 100℃±10℃ (RTH2) Protection type : Shut down o/p voltage, recovers automatically after temperature goes down -40 ~ +60℃ (Refer to "Derating Curve") 20 ~ 95% RH non-condensing -40 ~ +80℃, 10 ~ 95% RH ±0.03%/℃ (0 ~ 50℃) 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes SAFETY STANDARDS UL8750,CSA C22.2 No.250.13-12,EN61347-1,EN61347-2-13 approved, design refer to EN60950 WITHSTAND VOLTAGE I/P-O/P:3.75KVAC ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH Compliance to EN55015, EN61000-3-2 Class C (≧60% load) ; EN61000-3-3 EMC EMISSION 93.5% 0.7A / 277VAC MAX.LED DRIVE NUMBER ON MCB C TYPE 16A OVER CURRENT EMC 127 ~ 431VDC FREQUENCY RANGE LEAKAGE CURRENT SAFETY & 1200ms, 200ms / 230VAC at full load 115VAC/230VAC I/P-FG:2KVAC O/P-FG:0.5KVAC Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547,light industry level (surge 4KV), criteria A 252.3Khrs min. MIL-HDBK-217F (25℃) Refer to mechanical specification DIMENSION 1.52Kg; 8pcs/13.16Kg/1.5CUFT PACKING 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. EMC IMMUNITY MTBF OTHERS NOTE 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Constant current operation region is within 60% ~100% rated output voltage, and the output power must be more than 60% rated output power. This is the suitable operation region for LED related applications, but please reconfirm special electrical requirements for some specific system design. 5. Derating may be needed under low input voltages. Please check the static characteristics for more details. 6. Length of set up time is measured at cold first start. Turning ON/OFF the power supply may lead to increase of the set up time. 7. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. File Name:HBG-160-SPEC 2013-06-26 PDF
Документация на серию HBG-160B 

HBG-160

Дата модификации: 01.07.2013

Размер: 2.06 Мб

6 стр.

    Товары серии HBG-160B

    Наименование i Упаковка Мощность выходная Напряжение выходное Ток выходной Димминг Напряжение входное (DC) Эффективность
    HBG-160-24B (MW)
     
    		ШИМ, 0/1-10 В, потенциометр внешний
    HBG-160-36B (MW)
     
    		ШИМ, 0/1-10 В, потенциометр внешний
    HBG-160-48B (MW)
     
    		AC-DC сетевой преобразователь - P вых: 158 Вт; Выход: 48 В; U1: 28.8...48 В; I1: 3.3 А;... 1 шт ШИМ, 0/1-10 В, потенциометр внешний
    HBG-160-48DA (MW)
     
    		1 шт
    HBG-160-60B (MW)
     
    		1 шт ШИМ, 0/1-10 В, потенциометр внешний