Серия AC-DC сетевых преобразователей HRPG-150

Общие характеристики

	Раздел	AC-DC сетевые преобразователи
	Тип стабилизации
	Вход
	Конструктивное исполнение
	Возможности: ККМ, компенсация на проводах, 1U профиль, ограничение тока, дистанционное Вкл/Выкл, дополнительный выход 5 В Stand By
	Типы защиты	КЗ, перегрузка, перенапряжение, перегрев
	Количество выходов
	Тип управления выходом
	Исполнение
	Входное напряжение AC
	Входное напряжение DC
	Коэффициент мощности
	Напряжение изоляции вход-выход
	Напряжение изоляции вход-земля
	Напряжение изоляции выход-земля
	Применение
	Размер	159×97×38 мм
	Рабочая температура

Документация на серию HRPG-150

HRPG-150 150W Single Output with PFC Function ■ Features :
Universal AC input / Full range
Built-in active PFC function, PF>0.95
High efficiency up to 88%
Withstand 300VAC surge input for 5 seconds
Protections: Short circuit / Overload / Over voltage / series User’s Manual Over temperature
Cooling by free air convection
Built-in constant current limiting circuit
1U low profile 38mm
Built-in remote ON-OFF control
Stand by 5V@0.3A
Built-in remote sense function
No load power consumption<0.5W (Note.6)
5 years warranty Bauar t gepruft Sicherheit egel ma ge od o s be wac g www. tuv.com ID 2000000000 SPECIFICATION MODEL OUTPUT BS EN/EN62368-1 TPTC004 IEC62368-1 HRPG-150-3.3 HRPG-150-5 HRPG-150-7.5 HRPG-150-12 HRPG-150-15 HRPG-150-24 HRPG-150-36 HRPG-150-48 DC VOLTAGE 3.3V 5V 7.5V 12V 15V 24V 36V RATED CURRENT 30A 26A 20A 13A 10A 6.5A 4.3A 3.3A CURRENT RANGE 0 ~ 30A 0 ~ 26A 0 ~ 20A 0 ~ 13A 0 ~ 10A 0 ~ 6.5A 0 ~ 4.3A 0 ~ 3.3A RATED POWER 99W 158.4W 130W 150W 156W 150W 156W 154.8W RIPPLE & NOISE (max.) Note.2 80mVp-p 80mVp-p 100mVp-p 120mVp-p 150mVp-p 150mVp-p 200mVp-p 240mVp-p VOLTAGE ADJ. RANGE 4.3 ~ 5.8V ±2.5% 6.8 ~ 9V ±2.5% 10.2 ~ 13.8V ±1.5% 13.5 ~ 18V ±1.5% 21.6 ~ 28.8V ±1.5% 28.8 ~ 39.6V ±1.5% 40.8 ~ 55.2V ±1.5% 2.8 ~ 3.8V VOLTAGE TOLERANCE Note.3 ±2.5% LINE REGULATION ±0.5% ±0.5% ±0.5% ±0.3% ±0.3% ±0.2% ±0.2% ±0.2% LOAD REGULATION ±1.0% ±1.0% ±1.0% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% SETUP, RISE TIME 3000ms, 50ms/230VAC HOLD UP TIME (Typ.) 16ms/230VAC 87% 88% 88% PROTECTION FUNCTION 3000ms, 50ms/115VAC at full load 16ms/115VAC at full load VOLTAGE RANGE Note.5 85 ~ 264VAC FREQUENCY RANGE 47 ~ 63Hz INPUT 48V 120 ~ 370VDC POWER FACTOR (Typ.) PF>0.95/230VAC EFFICIENCY (Typ.) 78.5% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 1.7A/115VAC 35A/115VAC LEAKAGE CURRENT <1mA / 240VAC OVERLOAD 105 ~ 135% rated output power Protection type : Constant current limiting, recovers automatically after fault condition is removed 6 ~ 7V 9.4 ~ 10.9V 14.4 ~ 16.8V 18.8 ~ 21.8V 30 ~ 34.8V 41.4 ~ 48.6V 3.96 ~ 4.62V OVER VOLTAGE PF>0.99/115VAC at full load 84% 86% 87% 87% 0.9A/230VAC 70A/230VAC 57.6 ~ 67.2V Protection type : Shut down o/p voltage, re-power on to recover OVER TEMPERATURE 5V STANDBY Shut down o/p voltage, recovers automatically after temperature goes down 5VSB : 5V@0.3A ; tolerance±5%, ripple : 50mVp-p(max.) REMOTE CONTROL RC+ / RC-: 4 ~ 10V or open = power on ; 0 ~ 0.8V or short = power off WORKING TEMP. -40 ~ +70℃ (Refer to "Derating Curve") 20 ~ 90% RH non-condensing WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +85℃, 10 ~ 95% RH ±0.04%/℃ (0 ~ 50℃) TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC (Note 4) EMC EMISSION OTHERS NOTE 10 ~ 500Hz, 5G 10min./1cycle, 60min. each along X, Y, Z axes UL62368-1, TUV BS EN/EN62368-1, EAC TP TC 004 approved I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH Compliance to BS EN/EN55032 (CISPR32) Class B, BS EN/EN61000-3-2,-3, EAC TP TC 020 EMC IMMUNITY Compliance to BS EN/ EN61000-4-2,3,4,5,6,8,11, BS EN/ EN55024, BS EN/ EN61000-6-2,heavy industry level,criteria A , EAC TP TC 020 MTBF 213.4K hrs min. DIMENSION 159*97*38mm (L*W*H) PACKING 0.63Kg; 24pcs/16Kg/0.9CUFT MIL-HDBK-217F (25℃) 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on a 360mm*360mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on http://www.meanwell.com) 5. Derating may be needed under low input voltages. Please check the derating curve for more details. 6. No load power consumption<0.5W when RC- & RC+ (CN100 pin5,6) 0 ~ 0.8V or short. 7. Strongly recommended that external output capacitance should not exceed 5000uF. (Only for: HRPG-150-3.3/-5/-7.5/-12/-15) 8. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft). ※ Product Liability Disclaimer：For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx File Name:HRPG-150-SPEC 2021-09-15  PDF

Документация на HRPG-150-7.5 

HRPG-150-20210915.cdr

Дата модификации: 28.09.2021

Размер: 112.9 Кб

3 стр.

HRPG-150 150W Single Output with PFC Function • • • • • • • • • • • • • series ■ Features : Universal AC input / Full range Built-in active PFC function, PF>0.95 High efficiency up to 88% Withstand 300VAC surge input for 5 seconds Protections: Short circuit / Overload / Over voltage / Over temperature Cooling by free air convection Built-in constant current limiting circuit 1U low profile 38mm Built-in remote ON-OFF control Stand by 5V@0.3A Built-in remote sense function No load power consumption<0.5W (Note.6) 5 years warranty SPECIFICATION MODEL OUTPUT HRPG-150-3.3 HRPG-150-5 HRPG-150-7.5 HRPG-150-12 HRPG-150-15 HRPG-150-24 HRPG-150-36 HRPG-150-48 DC VOLTAGE 3.3V 5V 7.5V 12V 15V 24V 36V 48V RATED CURRENT 30A 26A 20A 13A 10A 6.5A 4.3A 3.3A CURRENT RANGE 0 ~ 30A 0 ~ 26A 0 ~ 20A 0 ~ 13A 0 ~ 10A 0 ~ 6.5A 0 ~ 4.3A 0 ~ 3.3A RATED POWER 99W 130W 150W 156W 150W 156W 154.8W 158.4W RIPPLE & NOISE (max.) Note.2 80mVp-p 80mVp-p 100mVp-p 120mVp-p 150mVp-p 150mVp-p 200mVp-p 240mVp-p VOLTAGE ADJ. RANGE 4.3 ~ 5.8V 6.8 ~ 9V 10.2 ~ 13.8V 13.5 ~ 18V 21.6 ~ 28.8V 28.8 ~ 39.6V 40.8 ~ 55.2V VOLTAGE TOLERANCE Note.3 ±2.5% ±2.5% ±2.5% ±1.5% ±1.5% ±1.5% ±1.5% ±1.5% LINE REGULATION ±0.5% ±0.5% ±0.5% ±0.3% ±0.3% ±0.2% ±0.2% ±0.2% LOAD REGULATION ±1.0% ±1.0% ±1.0% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% SETUP, RISE TIME 3000ms, 50ms/230VAC HOLD UP TIME (Typ.) 16ms/230VAC 87% 88% 88% 2.8 ~ 3.8V 16ms/115VAC at full load Note.5 85 ~ 264VAC VOLTAGE RANGE FREQUENCY RANGE 47 ~ 63Hz INPUT PROTECTION FUNCTION 120 ~ 370VDC POWER FACTOR (Typ.) PF>0.95/230VAC EFFICIENCY (Typ.) 78.5% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 2.3A/115VAC 35A/115VAC LEAKAGE CURRENT <1mA / 240VAC OVERLOAD OVER VOLTAGE 3000ms, 50ms/115VAC at full load PF>0.99/115VAC at full load 84% 86% 87% 87% 1.3A/230VAC 70A/230VAC 105 ~ 135% rated output power Protection type : Constant current limiting, recovers automatically after fault condition is removed 6 ~ 7V 9.4 ~ 10.9V 14.4 ~ 16.8V 18.8 ~ 21.8V 30 ~ 34.8V 41.4 ~ 48.6V 3.96 ~ 4.62V 57.6 ~ 67.2V Protection type : Shut down o/p voltage, re-power on to recover 95℃(3.3V ~ 7.5V) , 85℃(12V ~ 48V) (TSW1 : detect on heatsink Q1 of power transistor) OVER TEMPERATURE 105℃(3.3V ~ 7.5V), 100℃(12V ~ 48V) (TSW2 : detect on heatsink HS4 of power transistor) 5V STANDBY Protection type : Shut down o/p voltage, recovers automatically after temperature goes down 5VSB : 5V@0.3A ; tolerance± 5%, ripple : 50mVp-p(max.) REMOTE CONTROL RC+ / RC-: 4 ~ 10V or open = power on ; 0 ~ 0.8V or short = power off WORKING TEMP. -40 ~ +70℃ (Refer to "Derating Curve") 20 ~ 90% RH non-condensing WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +85℃ , 10 ~ 95% RH ±0.04%/℃ (0 ~ 50℃) TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC (Note 4) EMC EMISSION OTHERS NOTE 10 ~ 500Hz, 5G 10min./1cycle, 60min. each along X, Y, Z axes UL60950-1, TUV EN60950-1 approved I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃ / 70% RH Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3 EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61000-6-2, heavy industry level, criteria A MTBF 213.4K hrs min. DIMENSION 159*97*38mm (L*W*H) PACKING 0.63Kg; 24pcs/16Kg/0.76CUFT MIL-HDBK-217F (25℃) 1. 2. 3. 4. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. Tolerance : includes set up tolerance, line regulation and load regulation. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on http://www.meanwell.com) 5. Derating may be needed under low input voltages. Please check the derating curve for more details. 6. No load power consumption<0.5W when RC- & RC+ (CN100 pin5,6) 0 ~ 0.8V or short. File Name:HRPG-150-SPEC 2013-10-21  PDF

Документация на серию HRPG-150 

Subject:

Дата модификации: 22.10.2013

Размер: 183.3 Кб

3 стр.

• найти HRPG-150.pdf

Товары серии HRPG-150

Наименование	i	Упаковка	P вых	Выход	U1	I1	КПД	Шум
HRPG-150-12 (MW)		1 шт
HRPG-150-15 (MW)		1 шт
HRPG-150-24 (MW)		1 шт
HRPG-150-3.3 (MW)		1 шт
HRPG-150-36 (MW)		1 шт
HRPG-150-48 (MW)		1 шт
HRPG-150-5 (MW)		1 шт
HRPG-150-7.5 (MW)		1 шт

HRPG-150 публикации

16 ноября 2022

новость

Акция: снижена цена на 48 В источники питания MEAN WELL

Компэл снизил цены на популярные серии ИП MEAN WELL с выходным напряжением 48 В. В акции участвуют ИП с креплением на  DIN–рейку и шасси в диапазоне мощности от 150 до 500 Вт (см. таблицу). Все источники питания обладают трехлетней... ...читать

12 мая 2022

новость

Источники питания MEAN WELL для промавтоматики и серверного оборудования в новых условиях (материалы вебинара)

Программа показатьсвернуть Приглашаем всех желающих на вебинар, посвященный линейке продукции MEAN WELL для промышленной автоматизации и оборудования, систем охраны, серверного, телекоммуникационного оборудования и базовых станций 4G/5G. На... ...читать

06 июля 2021

новость

Держим старые цены на MEAN WELL весь июль!

С 1 июля компания MEAN WELL в связи со сложной ситуацией на рынке электронных компонентов вынужденно повышает стоимость и сроки поставки продукции. Компэл для поддержки российских производителей замораживает на весь июль старые цены на широкий ряд... ...читать

25 января 2012

новость

HRPG-150 – экономичные AC/DC преобразователи

HRPG–150–XX – серия экономичных источников питания мощностью 150 Вт для монтажа на шасси от MEAN WELL. Модули питания выпускаются в перфорированном металлическом корпусе, который обеспечивает эффективный отвод тепла. Модули имеют... ...читать