Серия AC-DC сетевых преобразователей HVGC-150B

MEAN WELL

Общие характеристики

 Раздел AC-DC сетевые преобразователи
Выходная мощность (ном)
Тип стабилизации
Вход
Конструктивное исполнение
Возможности LED драйвер, ККМ, низкие пульсации
Типы защиты КЗ, перегрузка, перенапряжение, перегрев
Количество выходов
Тип управления выходом ШИМ, 1-10 В, потенциометр внешний
Исполнение
Входное напряжение AC
Входное напряжение DC
Коэффициент мощности
Напряжение изоляции вход-выход
Напряжение изоляции вход-земля
Напряжение изоляции выход-земля
Применение
Размер 245×68×38.8 мм
Рабочая температура

Документация на серию HVGC-150B

HVGC-150 150W Constant Current Mode LED Driver series User’s Manual 110 M M IP65 IP67 ■ Features Wide input range 180 ~ 528VAC Constant Current mode output  Metal housing with ClassⅠdesign  Built-in active PFC function IP67 / IP65 design for indoor or outdoor installations  Function options: output adjustable via potentiometer; Bauar t gepruft Sicherheit egel ma ge od o s be wac g Type HL www.tuv.com ID 2000000000 ■ Applications  LED street lighting  LED high-bay lighting Parking space lighting  LED fishing lamp Type “HL” for use in ClassⅠ, Division 2 hazardous (Classified) location. 3 in 1 dimming (dim-to-off) ; Timer dimming  Typical lifetime>50000 hours  5 years warranty ■ Description HVGC-150 series is a 150W LED AC/DC LED power supply featuring the constant current mode and high voltage output. HVGC-150 operates from 180~528VAC and offers models with different rated current ranging between 350mA and 1400mA. Thanks to the high efficiency up to 91%, with the fanless design, the entire series is able to operate for -40℃ ~ +80℃ case temperature under free air convection. The design of metal housing and IP67/IP65 ingress protection level allows this series to fit both indoor and outdoor applications. HVGC-150 is equipped with various function options, such as dimming methodologies, so as to provide the optimal design flexibility for LED lighting system. ■ Model Encoding HVGC - 150 - 1750 A Function options Rated output current(350/500/700/1050/1400mA) Rated wattage Series name Type A B IP Level IP65 IP67 AB IP65 D IP67 Function Io adjustable through built-in potentiometer. 3 in 1 dimming function (0~10Vdc, 10V PWM signal and resistance) Io adjustable through built-in potentiometer & 3 in 1 dimming function (0~10Vdc, 10V PWM signal and resistance) Timer dimming function, contact MEAN WELL for details(safety pending). Note In Stock In Stock In Stock By request File Name:HVGC-150-SPEC 2021-09-03 PDF
Документация на HVGC-150-700B 

HVGC-150.cdr

Дата модификации: 10.09.2021

Размер: 597.5 Кб

9 стр.

HVGC-150 150W Single Output LED Power Supply series Features : Constant current design Wide input range 180~528VAC Built-in active PFC function High efficiency up to 91% Protections: Short circuit / Over voltage / Over temperature Cooling by free air convection OCP point adjustable through output cable or internal potentiometer IP67 / IP65 design for indoor or outdoor installations Three in one dimming function (0~10Vdc or 10V PWM signal or resistance) Suitable for LED lighting and street lighting applications Compliance to worldwide safety regulations for lighting Suitable for dry / damp / wet locations 5 years warranty (Note.6) 110 F HVGC-150-350 A M M Bauar t gepruft Sicherheit egel ma ge od o s be wac g IP65 IP67 www.tuv.com ID 2000000000 A : IP65 rated. Output voltage and constant current level can be adjusted through internal potentiometer. B : IP67 rated. Constant current level adjustable through output cable with 0~10Vdc or 10V PWM signal or resistance. D (option) : IP67 rated. Timer dimming function, contact MEAN WELL for details. SPECIFICATION MODEL RATED CURRENT CURRENT ACCURACY OUTPUT HVGC-150-700 HVGC-150-1050 HVGC-150-1400 350mA 500mA 700mA 1050mA 1400mA MAX. OUTPUT VOLTAGE 42 ~ 428V 30 ~ 300V 21 ~ 215V 15 ~ 143V 12 ~ 107V RATED POWER 149.8W 150W 150.5W 150.15W 149.8W 1.5Vp-p 1Vp-p 0.7Vp-p 0.5Vp-p 630 ~ 1050mA 840 ~ 1400mA RIPPLE & NOISE (max.) Note.2 2Vp-p Can be adjusted by internal potentiometer A type only 210 ~ 350mA 300 ~ 500mA SETUP, RISE TIME 2700ms, 150ms at full load HOLD UP TIME (Typ.) 18ms at full load VOLTAGE RANGE 420 ~ 700mA 480VAC / 347VAC ; B type 5000ms, 150ms at 95% load 480VAC / 347VAC 480VAC / 347VAC Note.3 180 ~ 528VAC 254VDC ~ 747VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF 0.98/230VAC, PF 0.97/277VAC, PF 0.95/347VAC, PF 0.93/480VAC at full load (Please refer to "Power Factor Characteristic" curve) EFFICIENCY (Typ.) 91% 91% 91% 0.5A / 347VAC 0.38A / 480VAC COLD START 35A(twidth=790 s measured at 50% Ipeak) at 480VAC AC CURRENT (Typ.) INRUSH CURRENT (Typ.) PROTECTION HVGC-150-500 5.0% CURRENT ADJ. RANGE INPUT HVGC-150-350 90% 90% 151 ~ 165V 113 ~ 124V LEAKAGE CURRENT <0.75mA / 480VAC SHORT CIRCUIT Constant current limiting, recovers automatically after fault condition is removed OVER VOLTAGE 430 ~ 460V 316 ~ 346V 226 ~ 247V Protection type : Shut down o/p voltage, re-power on to recovery OVER TEMPERATURE 95 10 (RTH2) Protection type : Shut down o/p voltage with auto-recovery or re-power on to recovery WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION -40 ~ +70 (Refer to "Derating Curve") 20 ~ 95% RH non-condensing -40 ~ +80 0.03%/ , 10 ~ 95% RH (0 ~ 60 ) 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes SAFETY STANDARDS Note.4 UL8750, CSA C22.2 No. 250.0-08, TUV EN61347-1, EN61347-2-13, IP65 or IP67 approved SAFETY & EMC WITHSTAND VOLTAGE I/P-O/P:3.75KVAC ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH Compliance to EN55015, EN61000-3-2 Class C ( 50% load) ; EN61000-3-3, FCC part 15 class B EMC EMISSION EMC IMMUNITY MTBF OTHERS DIMENSION PACKING NOTE I/P-FG:2KVAC O/P-FG:0.5KVAC Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, light industry level (surge 4KV), criteria A 179.5K hrs min. MIL-HDBK-217F (25 ) 245*68*38.8mm (L*W*H) 1.24Kg; 12pcs/15.9Kg/0.78CUFT 1. All parameters NOT specially mentioned are measured at 347VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf parallel capacitor. 3. Derating may be needed under low input voltages. Please check the static characteristics for more details. 4. Safety and EMC design refer to EN60598-1, CNS15233, GB7000.1. 5. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. 6. Refer to warranty statement. File Name:HVGC-150-SPEC 2012-12-28 PDF
Документация на серию HVGC-150B 

HVGC-150.cdr

Дата модификации: 23.01.2013

Размер: 153.7 Кб

6 стр.

    Товары серии HVGC-150B

    Наименование i Упаковка Выход U1 I1 КПД Шум
    HVGC-150-1050B (MW)
     
    		AC-DC сетевой преобразователь - P вых: 150 Вт; Выход: 1.05 А; U1: 15...143 В; I1: 1.05 ... 1 шт
    HVGC-150-350B (MW)
     
    		AC-DC сетевой преобразователь - P вых: 150 Вт; Выход: 0.35 А; U1: 42...428 В; I1: 350 м... 1 шт
    HVGC-150-500B (MW)
     
    		AC-DC сетевой преобразователь - P вых: 150 Вт; Выход: 0.5 А; U1: 30...300 В; I1: 500 мА... 1 шт
    HVGC-150-700B (MW)
     
    		AC-DC сетевой преобразователь - P вых: 150 Вт; Выход: 0.7 А; U1: 21...215 В; I1: 700 мА... 1 шт