Серия LED-драйверов LDD-HS

Общие характеристики

	Раздел	LED-драйверы
	Тип преобразователя
	Диапазон выходных напряжений
	Напряжение сети/входное номинальное
	Режим стабилизации
	Тип диммирования
	Исполнение конструктивное
	Степень защиты (IP)
	Подстройка выходных параметров
	Диапазон входных напряжений (DC)
	Количество выходов
	Функция защиты
	Температура рабочая
	Размер	31.8×20.3×12.2 мм
	Применение
	Особенности

Документация на серию LDD-HS

LDD-H DC-DC Constant Current Step-Down LED driver series ■ Features : DC/DC step-down converter Constant current output: 300mA to 1500mA Wide input voltage: 9 ~ 56VDC Wide output LED string voltage: 2 ~ 52VDC High efficiency up to 97% Built-in EMI filter, comply with BS EN/EN55015 and FCC part15 without additional input filter and capacitors Built-in PWM and remote ON/OFF control Protections: Short circuit / Over temperature Cooling by free air convection Fully encapsulated with IP67 level for pin and wire style Non-potted, optional conformal coating for SMD style (Order No.: LDD- 350-1000 HSC) Compact size Low cost, high reliability Suitable for driving illumination LED 3 years warranty LDD-350H W Blank : pin style W : wire style S : SMD style LDD-1200H W Blank : pin style W : wire style SPECIFICATION ORDER NO. CURRENT RANGE VOLTAGE RANGE OUTPUT LDD-300H LDD-350H LDD-500H LDD-600H LDD-700H LDD-1000H LDD-1200H LDD-1500H 300mA 350mA 500mA 600mA 700mA 1000mA 1200mA 1500mA Note.4 2 ~ 52VDC CURRENT ACCURACY (Typ.) ±3% at 24VDC input ; ±4% at 48VDC input for LDD-H/HW ; ±5% for LDD-HS 150mVp-p 150mVp-p 200mVp-p 200mVp-p RIPPLE & NOISE(max.) Note.2 150mVp-p 2 ~ 46VDC 350mVp-p 350mVp-p 350mVp-p 40KHz ~ 1000KHz SWITCHING FREQENCY EXTERNAL CAPACITANCE LOAD (max.) 2.2uF VOLTAGE RANGE INPUT 9 ~ 56VDC 9 ~ 52VDC 97% at full load and 36VDC/48VDC input for LDD-H/HW ; 96% at full load and 36VDC/48VDC input for LDD-HS EFFICIENCY (max.) 320mA 450mA 550mA 650mA 900mA 1100mA Full load Note.3 270mA DC CURRENT 5mA No load FILTER 1360mA Capacitor Leave open if not use PWM REMOTE ON/OFF DIMMING & PWM FREQUENCY ON/OFF CONTROL QUIESCENT INPUT CURRENT IN SHUTDOWN MODE(max.) SHORT CIRCUIT PROTECTION OVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY STORAGE TEMP., HUMIDITY ENVIRONMENT TEMP. COEFFICIENT Power ON with dimming: DIM ~ -Vin >2.5 ~ 6VDC or open circuit Power OFF : DIM ~ -Vin < 0.8VDC or short 100 ~ 1KHz 1mA at PWM dimming OFF and 24VDC input Regulated at rated output current Protection type: Can be continued, recovers automatically after fault condition is removed Tj 150℃ typically(IC1) detect on main control IC Protection type : Shut down, recovers automatically after temperature goes down -40 ~ + 85℃(Refer to derating curve) 20% ~ 90% RH non-condensing for LDD-H/HW ; 20%~85% RH non-condensing for LDD-HS -55 ~ +125℃, 10 ~ 95% RH ±0.03% / ℃ 10 ~ 500Hz, 2G 10min./1 cycle, period for 60min. each along X, Y, Z axes VIBRATION OPERATING CASE TEMP. (max.) 100℃ SAFETY STANDARDS EAC TP TC 020/2011 approved EMC OTHERS NOTE EMC EMISSION EMC IMMUNITY Compliance to BS EN/EN61000-4-2,3,4,6,8, light industry level, criteria A, EAC TP TC 020 MTBF DIMENSION 1000Khrs min. MIL-HDBK-217F (25℃) 31.8*20.3*12.2mm or 1.25"*0.8"*0.48" inch (L*W*H) for LDD-H/HW ; 31.8*20.3*11.4mm or 1.25"*0.8"*0.45" inch (L*W*H) for LDD-HS WEIGHT LDD-H:15.6g ; LDD-HW:18g ; LDD-HS:12.8g POTTING MATERIAL Expoxy(UL94-V0) for LDD-H/HW ; without potted for LDD-HS Compliance to BS EN/EN55015, FCC part 15 class B, EAC TP TC 020 1.All parameters are specified at normal input(48VDC), rated load, 25℃ 70% RH ambient. 2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf capacitor. 3.Test condition: 48VDC input. 4.Output voltage will always step down by 3 volts from input DC voltage. 5.The output of LDD-H should not be connected to the input of the same unit or output from other sources. ※ Product Liability Disclaimer：For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx File Name:LDD-H-SPEC 2021-11-24

Документация на LDD-700HS

LDD-H.cdr

Дата модификации: 22.11.2021

Размер: 1.34 Мб

4 стр.

LDD-H DC-DC Constant Current Step-Down LED driver s e r ie s ■   ‧   ‧       ‧       ‧         ‧     ‧                 ‧      ‧       ‧     ‧             ‧              ‧   ‧     ‧     ‧                  SPECIFICATION ORDER NO. LDD-300H CURRENT RANGE VOLTAGE RANGE OUTPUT 300mA Note.4 2 ~ 52VDC LDD-350H LDD-500H LDD-600H LDD-700H LDD- 1000H 350mA 500mA 600mA 700mA 1000mA 200mVp-p 350mVp-p CURRENT ACCURACY (Typ.) ±3% at 24VDC input ; ±4% at 48VDC input for LDD-H/HW ; ±5% for LDD-HS 150mVp-p 150mVp-p 200mVp-p RIPPLE & NOISE(max.) Note.2 150mVp-p 40KHz ~ 1000KHz SWITCHING FREQENCY EXTERNAL CAPACITANCE LOAD (max.) 2.2uF 9 ~ 56VDC VOLTAGE RANGE EFFICIENCY (max.) INPU T FILTER PWM REMOTE ON/OFF DIMMING & PWM FREQUENCY ON/OFF CONTROL QUIESCENT INPUT CURRENT IN SHUTDOWN MODE(max.) SHORT CIRCUIT PROTECTION OVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT 97% at full load and 36VDC/48VDC input for LDD-H/HW ; 96% at full load and 36VDC/48VDC input for LDD-HS Full load Note.3 270mA DC CURRENT No load 5mA STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION 320mA 450mA 550mA 650mA 900mA Capacitor Leave open if not use Power ON with dimming: DIM ~ -Vin >2.5 ~ 6VDC or open circuit Power OFF : DIM ~ -Vin < 0.8VDC or short 100 ~ 1KHz 1mA at PWM dimming OFF and 24VDC input Regula ted at rated output c urrent Protection type: C an be con tinued, recovers automatically after fault condition is remove d Tj 150℃ typically (IC1) detect on main control IC Protecti on type : Shut down, recovers automatically after temperatur e goes dow n -40 ~ + 85℃(Refer to derating curve) 20% ~ 90% RH non-condensing for LDD-H/HW ; 20%~85% RH non-con densing for LDD-HS -55 ~ +125℃, 10 ~ 95% RH ±0.03% / ℃ 10 ~ 500Hz, 2G 10min./1 cycle, period for 60min. each along X, Y, Z axes OPERATING CASE TEMP. (max.) 100℃ EMC OTHERS NOTE EMC EMISSION Compliance to EN55015, FCC part 15 class B EMC IMMUNITY Compliance to EN61000-4-2,3,4,6,8, light industry level, criteria A MTBF DIMENSION 2000Khrs min. MIL-HDBK-217F (25℃) 31.8*20.3*12.2mm or 1.25"*0.8"*0.48" inch (L*W*H) for LDD-H/HW ; 31.8*20.3*11.4mm or 1.25"*0.8"*0.45" inch (L*W*H) for LDD-HS WEIGHT LDD-H:15.6g ; LDD -HW:18g ; LDD-HS:12.8g POTTING MATERIAL Expoxy(UL94-V0) for LDD-H/HW ; without potted for LDD-HS          ℃                                       File Name:LDD-H-SPEC 2013-09-11

Документация на серию LDD-HS

Subject:

Дата модификации: 11.09.2013

Размер: 221.6 Кб

3 стр.

найти LDD-HS.pdf

Товары серии LDD-HS

Наименование	i	Упаковка	Мощность выходная	Ток выходной	Эффективность
LDD-1000HS (MW)		в линейках 15 шт
LDD-300HS (MW)		в линейках 20 шт
LDD-350HS (MW)		в линейках 15 шт
LDD-500HS (MW)		в линейках 20 шт
LDD-600HS (MW)		в линейках 15 шт
LDD-700HS (MW)		в линейках 15 шт