Серия DC-DC модульных преобразователей MHB-150

Общие характеристики

	Раздел	DC-DC модульные преобразователи
	Монтаж
	Выходная мощность
	Количество каналов
	Входное напряжение
	Возможности
	Комплекс защит	КЗ, перегрузка, перенапряжение
	Номинальное входное напряжение
	КПД
	Напряжение изоляции вход-выход
	Размер	58×61×13 мм
	Рабочая температура

Документация на серию MHB-150

150W DC-DC Half-Brick Regulated Single Output Converter MHB150 series ■ Features : Half-brick size (2.28"×2.4"×0.5") with industry standard pin out 2:1 wide input range Protections: Short circuit / Over current / Over voltage / Over temperature High efficiency up to 89% 1500VDC I/O isolation Built-in remote ON/OFF control Built-in remote sense function Trimming output ±10% Five-sided shield metal case Optional heat sinks for extended operating temperature Output 2.5V/3.3V/15V available Approvals: UL / CUL / EAC / CE / UKCA 3 years warranty SPECIFICATION MHB150-48S05 MHB150-48S12 MHB150-48S24 DC VOLTAGE 5V 12V 24V CURRENT RANGE 0 ~ 30A 0 ~ 12.5A 0 ~ 6.25A RATED POWER 150W 150mVp-p 240mVp-p 12500uF 6250uF MODEL RIPPLE & NOISE (max.) Note.2 100mVp-p OUTPUT VOLTAGE ACCURACY Note.3 ±1.0% LINE REGULATION ±0.2% LOAD REGULATION ±0.2% SWITCHING FREQUENCY (Typ.) 500KHz EXTERNAL TRIM ADJ. RANGE (Typ.) ±10% EXTERNAL CAPACITIVE LOAD (max.) 30000uF 48VDC RATED DC INPUT VOLTAGE RANGE 36 ~ 75VDC INPUT SURGE VOLTAGE (100ms max.) 100VDC UNDER VOLTAGE LOCKOUT Power up: 34VDC, Power down: 32.5VDC 86% EFFICIENCY (Typ.) 89% FULL LOAD 3.7A 3.6A DC CURRENT NO LOAD 25mA FILTER Pi-network OUTPUT OVER CURRENT PROTECTION OUTPUT OVER VOLTAGE (Typ.) OUTPUT SHORT CIRCUIT OVER TEMPERATURE REMOTE CONTROL FUNCTION OPERATING OUTPUT TRIMMING WORKING TEMPERATURE (Typ.) ENVIRONMENT OTHERS Protection type : Output voltage clamp Protection type : Can be continuous, recovers automatically after fault condition is removed 100℃±5℃of case temperature Please refer to "Remote ON/OFF Control" for details ±10%, Please refer to "External Output Trimming" for details -40 ~ +100℃ ; Thermal shutdown at 100℃±5℃of case temperature (please refer to "Thermal Curve") 0% ~ 95% RH max. STORAGE TEMP., HUMIDITY -55 ~ +105℃, 0 ~ 95% RH ±0.03%/℃ (0~60℃) UL60950-1, EAC TP TC 004 approved I/P-O/P:1500VDC, I/P-Case:1500VDC, O/P-Case:1500VDC I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH Compliance to BS EN/EN55032 (CISPR32) Class A with external components (please refer to "EMC Suggestion Circuit"), EAC TP TC 020 EMC IMMUNITY CASE MATERIAL Compliance to BS EN/EN61000-4-2,3,4,5,6,8; BS EN/EN55024, light industry level, criteria A, EAC TP TC 020 MTBF 900K hrs typ. MIL-HDBK-217F (25℃) 57.9*61*12.7mm (2.28"*2.40"*0.5") (L*W*H) 100g DIMENSION WEIGHT NOTE 3.6A 110 ~ 140% rated output power Protection type : Over current limiting, recovers automatically after fault condition is removed 115 ~ 140% rated output voltage WORKING HUMIDITY TEMP. COEFFICIENT SAFETY STANDARDS SAFETY & ISOLATION VOLTAGE ISOLATION RESISTANCE EMC (Note 4) EMC EMISSION 89% Aluminum 1. All parameters NOT specially mentioned are measured at 48VDC input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 1uf ceramic & 10uf tantalum capacitor across output. 3. The power supply need to connect "+Vout" to "+R.S" and "-Vout" to "-R.S". 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” ※ Product Liability Disclaimer：For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx File Name:MHB150-SPEC 2021-06-22  PDF

Документация на MHB150-48S05 

MHB150.cdr

Дата модификации: 28.07.2021

Размер: 155.5 Кб

6 стр.

150W DC-DC Half-Brick Regulated Single Output Converter MHB150 series Features : Half-brick size (2.28" 2.4" 0.5") with industry standard pin out 2:1 wide input range Protections: Short circuit / Over current / Over voltage / Over temperature High efficiency up to 89% 1500VDC I/O isolation Built-in remote ON/OFF control Built-in remote sense function Trimming output 10% Five-sided shield metal case Optional heat sinks for extended operating temperature Output 2.5V/3.3V/15V available Approvals: UL / CUL / CE 3 years warranty SPECIFICATION MODEL MHB150-48S05 MHB150-48S24 DC VOLTAGE 5V 12V 24V CURRENT RANGE 0 ~ 30A 0 ~ 12.5A 0 ~ 6.25A RATED POWER 150W 150mVp-p 240mVp-p 12500uF 6250uF RIPPLE & NOISE (max.) Note.2 100mVp-p OUTPUT MHB150-48S12 VOLTAGE ACCURACY Note.3 1.0% LINE REGULATION 0.2% LOAD REGULATION 0.2% SWITCHING FREQUENCY (Typ.) 500KHz EXTERNAL TRIM ADJ. RANGE (Typ.) 10% EXTERNAL CAPACITIVE LOAD (max.) 30000uF 48VDC RATED DC INPUT VOLTAGE RANGE 36 ~ 75VDC INPUT SURGE VOLTAGE (100ms max.) 100VDC UNDER VOLTAGE LOCKOUT Power up: 34VDC, Power down: 32.5VDC 89% EFFICIENCY (Typ.) 86% FULL LOAD 3.7A 3.6A DC CURRENT NO LOAD 25mA FILTER Pi-network OUTPUT OVER CURRENT PROTECTION OUTPUT OVER VOLTAGE (Typ.) OUTPUT SHORT CIRCUIT 89% 3.6A 110 ~ 140% rated output power Protection type : Over current limiting, recovers automatically after fault condition is removed 115 ~ 140% rated output voltage Protection type : Output voltage clamp Protection type : Can be continuous, recovers automatically after fault condition is removed 100 5 of case temperature OVER TEMPERATURE Please refer to "Remote ON/OFF Control" for details REMOTE CONTROL FUNCTION OPERATING OUTPUT TRIMMING 10%, Please refer to "External Output Trimming" for details 5 of case temperature (please refer to "Thermal Curve") WORKING TEMPERATURE (Typ.) -40 ~ +100 ; Thermal shutdown at 100 0% ~ 95% RH max. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY -55 ~ +105 , 0 ~ 95% RH TEMP. COEFFICIENT SAFETY STANDARDS SAFETY & ISOLATION VOLTAGE ISOLATION RESISTANCE EMC (Note 4) EMC EMISSION OTHERS I/P-O/P:100M Ohms / 500VDC / 25 / 70% RH Compliance to EN55022 (CISPR22) Class A with external components (please refer to "EMC Suggestion Circuit") EMC IMMUNITY CASE MATERIAL Compliance to EN61000-4-2,3,4,5,6,8; EN55024, light industry level, criteria A MTBF 900K hrs typ. MIL-HDBK-217F (25 ) 57.9*61*12.7mm (2.28"*2.40"*0.5") (L*W*H) 100g DIMENSION WEIGHT NOTE 0.03%/ (0~60 UL60950-1 approved I/P-O/P:1500VDC, I/P-Case:1500VDC, O/P-Case:1500VDC Aluminum 1. All parameters NOT specially mentioned are measured at 48VDC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 1uf ceramic & 10uf tantalum capacitor across output. 3. The power supply need to connect "+Vout" to "+R.S" and "-Vout" to "-R.S". 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” File Name:MHB150-SPEC 2011-09-08  PDF

Документация на серию MHB-150 

MHB150.cdr

Дата модификации: 16.09.2011

Размер: 835 Кб

6 стр.

• найти MHB-150.pdf

Товары серии MHB-150

Наименование	i	Упаковка	Выход	U1	I1
MHB150-48S12 (MW)		1 шт
MHB150-48S24 (MW)		1 шт