Серия DC-DC модульных преобразователей MHB100

MEAN WELL

Общие характеристики

 Раздел DC-DC модульные преобразователи
Монтаж
Выходная мощность
Количество каналов
Параметры выходов
Возможности
Комплекс защит КЗ, перегрузка, перенапряжение, перегрев
Напряжение 1 выхода
Ток 1 выхода
Напряжение изоляции вход-выход
Размер 57.9×61×12.7 мм
Рабочая температура

Документация на серию MHB100

100W DC-DC Half-Brick Regulated Single Output Converter MHB100 series ■ Features : Half-brick size (2.28"×2.4"×0.5") with industry standard pin out 2:1 wide input range Protections: Short circuit / Over current / Over voltage / Over temperature High efficiency up to 89% 1500VDC I/O isolation Built-in remote ON/OFF control Built-in remote sense function Trimming output ±10% Five-sided shield metal case Optional heat sinks for extended operating temperature Output 2.5V/3.3V/15V available Approvals: UL / CUL / EAC / CE / UKCA 3 years warranty SPECIFICATION MODEL MHB100-24S05 MHB100-24S12 MHB100-24S24 MHB100-48S05 MHB100-48S12 MHB100-48S24 5V 12V 24V 5V 12V 24V CURRENT RANGE 0 ~ 20A 0 ~ 8.3A 0 ~ 4.17A 0 ~ 20A 0 ~ 8.3A 0 ~ 4.17A RATED POWER 100W 150mVp-p 240mVp-p 100mVp-p 150mVp-p 240mVp-p 8300uF 4170uF 20000uF 48VDC 8300uF 4170uF DC VOLTAGE RIPPLE & NOISE (max.) Note.2 100mVp-p OUTPUT VOLTAGE ACCURACY Note.3 ±1.0% LINE REGULATION ±0.2% LOAD REGULATION ±0.2% SWITCHING FREQUENCY (Typ.) 500KHz EXTERNAL TRIM ADJ. RANGE (Typ.) ±10% EXTERNAL CAPACITIVE LOAD (max.) 20000uF RATED DC INPUT VOLTAGE RANGE 24VDC 18 ~ 36VDC 36 ~ 75VDC SURGE VOLTAGE (100ms max.) 50VDC INPUT UNDER VOLTAGE LOCKOUT EFFICIENCY (Typ.) FULL LOAD DC CURRENT NO LOAD FILTER OUTPUT OVER CURRENT PROTECTION OUTPUT OVER VOLTAGE (Typ.) OUTPUT SHORT CIRCUIT OVER TEMPERATURE REMOTE CONTROL FUNCTION OPERATING OUTPUT TRIMMING WORKING TEMPERATURE (Typ.) ENVIRONMENT Power up: 34VDC, Power down: 32.5VDC 86% 89% 88% 5020mA 4905mA 2480mA 4880mA 50mA Pi-network 100℃±5℃of case temperature Please refer to "Remote ON/OFF Control" for details ±10%, Please refer to "External Output Trimming" for details -40 ~ +100℃ ; Thermal shutdown at 100℃±5℃of case temperature (please refer to "Thermal Curve") -55 ~ +105℃, 0 ~ 95% RH DIMENSION WEIGHT 2465mA Protection type : Output voltage clamp Protection type : Can be continuous, recovers automatically after fault condition is removed 0% ~ 95% RH max. MTBF 2445mA 50mA 110 ~ 140% rated output power Protection type : Over current limiting, recovers automatically after fault condition is removed 115 ~ 140% rated output voltage STORAGE TEMP., HUMIDITY EMC IMMUNITY CASE MATERIAL NOTE 87% WORKING HUMIDITY TEMP. COEFFICIENT SAFETY STANDARDS SAFETY & ISOLATION VOLTAGE ISOLATION RESISTANCE EMC (Note 4) EMC EMISSION OTHERS 100VDC Power up: 17VDC, Power down: 16VDC 84% 87% ±0.03%/℃ (0~60℃) UL60950-1, EAC TP TC 020/2011(EAC TP TC 004 for 48Vin type only) approved I/P-O/P:1500VDC, I/P-Case:1500VDC, O/P-Case:1500VDC I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH Compliance to BS EN/EN55032 (CISPR32) Class A with external components (please refer to "EMC Suggestion Circuit"), EAC TP TC 020 Compliance to BS EN/EN61000-4-2,3,4,5,6,8; BS EN/EN55024, light industry level, criteria A, EAC TP TC 020 Aluminum 900K hrs typ. MIL-HDBK-217F (25℃) 57.9*61*12.7mm (2.28"*2.40"*0.5") (L*W*H) 95g 1. All parameters NOT specially mentioned are measured at 24,48VDC input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 1uf ceramic & 10uf tantalum capacitor across output. 3. The power supply need to connect "+Vout" to "+R.S" and "-Vout" to "-R.S". 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” ※ Product Liability Disclaimer：For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx File Name:MHB100-SPEC 2021-11-24 PDF
Документация на MHB100-24S05 

MHB100.cdr

Дата модификации: 22.11.2021

Размер: 123.7 Кб

6 стр.

100W DC-DC Half-Brick Regulated Single Output Converter MHB100 series Features : Half-brick size (2.28" 2.4" 0.5") with industry standard pin out 2:1 wide input range Protections: Short circuit / Over current / Over voltage / Over temperature High efficiency up to 89% 1500VDC I/O isolation Built-in remote ON/OFF control Built-in remote sense function Trimming output 10% Five-sided shield metal case Optional heat sinks for extended operating temperature Output 2.5V/3.3V/15V available Approvals: UL / CUL / CE 3 years warranty SPECIFICATION MODEL MHB100-24S05 MHB100-24S24 MHB100-48S05 MHB100-48S12 MHB100-48S24 DC VOLTAGE 5V 12V 24V 5V 12V 24V CURRENT RANGE 0 ~ 20A 0 ~ 8.3A 0 ~ 4.17A 0 ~ 20A 0 ~ 8.3A 0 ~ 4.17A RATED POWER 100W 150mVp-p 240mVp-p 100mVp-p 150mVp-p 240mVp-p 8300uF 4170uF 20000uF 48VDC 8300uF 4170uF RIPPLE & NOISE (max.) Note.2 100mVp-p OUTPUT MHB100-24S12 VOLTAGE ACCURACY Note.3 1.0% LINE REGULATION 0.2% LOAD REGULATION 0.2% SWITCHING FREQUENCY (Typ.) 500KHz EXTERNAL TRIM ADJ. RANGE (Typ.) 10% EXTERNAL CAPACITIVE LOAD (max.) 20000uF RATED DC INPUT VOLTAGE RANGE 24VDC 18 ~ 36VDC 36 ~ 75VDC SURGE VOLTAGE (100ms max.) 50VDC INPUT UNDER VOLTAGE LOCKOUT EFFICIENCY (Typ.) FULL LOAD DC CURRENT NO LOAD FILTER OUTPUT OVER CURRENT PROTECTION OUTPUT OVER VOLTAGE (Typ.) OUTPUT SHORT CIRCUIT 100VDC Power up: 17VDC, Power down: 16VDC 84% 87% 87% 5020mA 4905mA 4880mA 50mA Pi-network Power up: 34VDC, Power down: 32.5VDC 86% 89% 88% 2480mA 2445mA 2465mA 50mA 110 ~ 140% rated output power Protection type : Over current limiting, recovers automatically after fault condition is removed 115 ~ 140% rated output voltage Protection type : Output voltage clamp Protection type : Can be continuous, recovers automatically after fault condition is removed 100 5 of case temperature OVER TEMPERATURE Please refer to "Remote ON/OFF Control" for details REMOTE CONTROL FUNCTION OPERATING OUTPUT TRIMMING 10%, Please refer to "External Output Trimming" for details 5 of case temperature (please refer to "Thermal Curve") WORKING TEMPERATURE (Typ.) -40 ~ +100 ; Thermal shutdown at 100 0% ~ 95% RH max. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY -55 ~ +105 , 0 ~ 95% RH TEMP. COEFFICIENT SAFETY STANDARDS SAFETY & ISOLATION VOLTAGE ISOLATION RESISTANCE EMC (Note 4) EMC EMISSION OTHERS I/P-O/P:100M Ohms / 500VDC / 25 / 70% RH Compliance to EN55022 (CISPR22) Class A with external components (please refer to "EMC Suggestion Circuit") EMC IMMUNITY CASE MATERIAL Compliance to EN61000-4-2,3,4,5,6,8; EN55024, light industry level, criteria A MTBF 900K hrs typ. MIL-HDBK-217F (25 ) 57.9*61*12.7mm (2.28"*2.40"*0.5") (L*W*H) 95g DIMENSION WEIGHT NOTE 0.03%/ (0~60 UL60950-1 approved I/P-O/P:1500VDC, I/P-Case:1500VDC, O/P-Case:1500VDC Aluminum 1. All parameters NOT specially mentioned are measured at 24,48VDC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 1uf ceramic & 10uf tantalum capacitor across output. 3. The power supply need to connect "+Vout" to "+R.S" and "-Vout" to "-R.S". 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” File Name:MHB100-SPEC 2011-09-08 PDF
Документация на серию MHB100 

MHB100.cdr

Дата модификации: 16.09.2011

Размер: 837.2 Кб

6 стр.

    Товары серии MHB100

    Наименование i Упаковка U вх U вх ном. КПД
    MHB100-24S05 (MW)
     
    		DC-DC модульный преобразователь - Примечания: DC-DC, 100Вт, вход 18…36В, выход 5В/20А, ... 1 шт
    MHB100-48S05 (MW)
     
    		DC-DC модульный преобразователь -