Серия AC-DC сетевых преобразователей MPD-65

MEAN WELL

Общие характеристики

 Раздел AC-DC сетевые преобразователи
Напряжение 1 канала
Тип стабилизации
Вход
Конструктивное исполнение
Возможности
Количество выходов
Тип управления выходом
Исполнение
Входное напряжение AC
Входное напряжение DC
Коэффициент мощности
Напряжение изоляции вход-выход
Напряжение изоляции вход-земля
Напряжение изоляции выход-земля
Применение
Шум

Документация на серию MPD-65

MPD-65 65W Dual Output Medical Type series User’s Manual ■ Features :  Universal AC input / Full range  Low leakage current <250 μA  Protections: Short circuit / Overload / Over voltage  Cooling by free air convection  Medical safety approved (2 x MOPP between primary to secondary)  100% full load burn-in test  Fixed switching frequency at 45KHz  3 years warranty EN 60601-1 IEC 60601-1 SPECIFICATION 8 MODEL OUTPUT MPD-65A CH1 CH2 CH1 CH2 DC VOLTAGE 5V 12V 5V 24V RATED CURRENT 5.5A 2.8A 3.5A 2A CURRENT RANGE 0.4 ~ 7A 0.2 ~ 3.2A 0.4 ~ 6A 0.2 ~ 2.6A RATED POWER 61.1W OUTPUT POWER (max.) 72W with 18CFM min. Forced air convection 150mVp-p CH1:4.5 ~ 5.5V ±7.0% ±4.0% ±7.0% ±1.0% ±2.0% ±1.0% ±2.0% LOAD REGULATION ±3.0% ±4.0% ±3.0% ±4.0% SETUP, RISE TIME 800ms, 20ms/230VAC HOLD UP TIME (Typ.) 80ms/230VAC 12ms/115VAC at full load VOLTAGE RANGE 90 ~ 264VAC 127 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz EFFICIENCY(Typ.) 75% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 1.6A/115VAC 800ms, 20ms/115VAC at full load 78% 1A/230VAC COLD START 20A/115VAC 40A/230VAC Note.7 Earth leakage current < 250μ A/264VAC , Touch current < 60μ A/264VAC PROTECTION OVER VOLTAGE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS SAFETY & ISOLATION LEVEL WITHSTAND VOLTAGE EMC 73 ~ 105W rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed 5.75 ~ 6.75VDC on CH1 Protection type : Hiccup mode, recovers automatically after fault condition is removed -10 ~ +55℃ (Refer to "Derating Curve") 20 ~ 90% RH non-condensing -20 ~ +85℃, 10 ~ 95% RH ±0.04%/℃ (0 ~ 50℃) on +5V output 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes ANSI/AAMI ES60601-1, TUV EN60601-1, IEC60601-1 approved Primary-Secondary: 2xMOPP, Primary-Earth:1xMOPP I/P-O/P:4KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC ISOLATION RESISTANCE EMC EMISSION EMC IMMUNITY I/P-O/P, I/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH Compliance to EN55011 (CISPR11) Class B, EN61000-3-2,-3 MTBF 291.3Khrs min. MIL-HDBK-217F (25℃) 127*76*42mm (L*W*H) 0.25Kg; 54pcs/16Kg/1.28CUFT DIMENSION PACKING NOTE 60mVp-p VOLTAGE TOLERANCE Note.3 ±4.0% OVERLOAD OTHERS 150mVp-p CH1:4.5 ~ 5.5V LINE REGULATION LEAKAGE CURRENT (Note 4) 65.5W RIPPLE & NOISE (max.) Note.2 60mVp-p VOLTAGE ADJ. RANGE INPUT MPD-65B OUTPUT NUMBER Compliance to EN61000-4-2,3,4,5,6,8,11, EN60601-1-2, medical level, criteria A 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on a 360mm*360mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on http://www.meanwell.com) 5. Mounting holes M1 and M2 should be grounded for EMI purposes. 6. Heat Sink HS1,HS2 can not be shorted. 7. Touch current was measured from primary input to DC output. ※ Product Liability Disclaimer：For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx File Name:MPD-65-SPEC 2021-09-15 PDF
Документация на MPD-65B 

MPD-65-20210915.cdr

Дата модификации: 26.11.2021

Размер: 119 Кб

2 стр.

MPD-65 65W Dual Output Medical Type series Features : Universal AC input / Full range Low leakage current 0.3mA Protections: Short circuit / Overload / Over voltage Cooling by free air convection 100% full load burn-in test Fixed switching frequency at 45KHz 3 years warranty EN60601-1 IEC60601-1 SPECIFICATION MODEL OUTPUT MPD-65A CH1 CH2 CH1 DC VOLTAGE 5V 12V 5V 24V RATED CURRENT 5.5A 2.8A 3.5A 2A CURRENT RANGE 0.4 ~ 7A 0.2 ~ 3.2A 0.4 ~ 6A 0.2 ~ 2.6A RATED POWER 61.1W OUTPUT POWER (max.) 72W with 18CFM min. Forced air convection 7.0% 4.0% 7.0% 1.0% 2.0% 1.0% 2.0% LOAD REGULATION 3.0% 4.0% 3.0% 4.0% 800ms, 20ms/115VAC at full load 80ms/230VAC 12ms/115VAC at full load VOLTAGE RANGE 90 ~ 264VAC 127 ~ 370VDC FREQUENCY RANGE 47 ~ 440Hz EFFICIENCY(Typ.) 75% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 1.6A/115VAC OVER VOLTAGE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE 78% 1A/230VAC COLD START 20A/115VAC <0.3mA / 264VAC 40A/230VAC 73 ~ 105W rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed 5.75 ~ 6.75VDC on CH1 Protection type : Hiccup mode, recovers automatically after fault condition is removed -10 ~ +55 (Refer to output load derating curve) 20 ~ 90% RH non-condensing -20 ~ +85 , 10 ~ 95% RH 0.04%/ (0 ~ 50 ) on +5V output 10 ~ 500Hz, 2G 10min./1cycle, Period for 60min.each along X, Y, Z axes UL2601-1, TUV EN60601-1, IEC601-1 Approved I/P-O/P:4KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC ISOLATION RESISTANCE I/P-O/P, I/P-FG:100M Ohms/500VDC EMI CONDUCTION & RADIATION Compliance to EN55011 (CISPR11) Class B HARMONIC CURRENT EMS IMMUNITY MTBF DIMENSION PACKING NOTE 800ms, 20ms/230VAC HOLD UP TIME (Typ.) PROTECTION OTHERS 150mVp-p 4.0% OVERLOAD (Note 4) 60mVp-p CH1:4.5 ~ 5.5V LINE REGULATION LEAKAGE CURRENT EMC 150mVp-p CH1:4.5 ~ 5.5V VOLTAGE TOLERANCE Note.3 SETUP, RISE TIME SAFETY & CH2 65.5W RIPPLE & NOISE (max.) Note.2 60mVp-p VOLTAGE ADJ. RANGE INPUT MPD-65B OUTPUT NUMBER Compliance to EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN60601-1-2 Medical level, criteria A 291.3Khrs min. MIL-HDBK-217F (25 127*76*42mm (L*W*H) 0.25Kg; 54pcs/16Kg/1.35CUFT ) 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. 5. Mounting holes M1 and M2 should be grounded for EMI purposes. File Name:MPD-65-SPEC 2006-12-18 PDF
Документация на серию MPD-65 

MPD-65.cdr

Дата модификации: 12.01.2007

Размер: 331 Кб

2 стр.

    Товары серии MPD-65

    Наименование i Упаковка P вых Выход I1 Защита КПД Размер T раб
    MPD-65A (MW)
     
    		AC-DC сетевой преобразователь - P вых: 61 Вт; Выход: 5 В, 12 В; U1: 4.5...5.5 В; I1: 0.... в коробках 6 шт КЗ, перегрузка, перенапряжение 127×76×42 мм
    MPD-65A PBF (MW)
     
    		— SHORT CIRCUIT; OUTPUT OVER VOLTAGE; OVER LOAD 127×76 мм
    MPD-65B (MW)
     
    		AC-DC сетевой преобразователь - P вых: 65 Вт; Выход: 5 В, 24 В; U1: 4.5...5.5 В; I1: 0.... в коробках 6 шт КЗ, перегрузка, перенапряжение 127×76×42 мм

    MPD-65 публикации

    28 ноября 2007
    статья

    Продукция MEAN WELL: соответствие международным сертификатам и директиве RoHS

            Серийно выпускаемая электронная продукция, поставляемая во многие страны, должна удовлетворять определенным международным стандартам безопасности (Safety standards) и электромагнитной совместимости (EMC... ...читать