Серия AC-DC сетевых преобразователей MSP-300

Общие характеристики

	Раздел	AC-DC сетевые преобразователи
	Тип стабилизации
	Вход
	Конструктивное исполнение
	Возможности: ККМ, компенсация на проводах, 1U профиль, ограничение тока, дистанционное Вкл/Выкл, сигнал DC OK, дополнительный выход 5 В Stand By
	Количество выходов
	Тип управления выходом
	Исполнение
	Входное напряжение AC
	Входное напряжение DC
	Коэффициент мощности
	Напряжение изоляции вход-выход
	Напряжение изоляции вход-земля
	Напряжение изоляции выход-земля
	Применение
	Размер	199×105×41 мм
	Рабочая температура

Документация на серию MSP-300

MSP-300 300W Single Output Medical Type ■ Features : series User’s Manual Universal AC input / Full range Built-in active PFC function, PF>0.95 High efficiency up to 89% Withstand 300VAC surge input for 5 seconds Protections: Short circuit / Overload / Over voltage / Over temperature Built-in constant current limiting circuit 1U low profile 41mm Medical safety approved (MOOP level) Built-in cooling fan ON-OFF control Built-in DC OK signal Built-in remote ON-OFF control Standby 5V@0.3A Built-in remote sense function No load power consumption<0.5W (Note.6) 5 years warranty SPECIFICATION MODEL OUTPUT ANSI/AAMI ES60601-1 MSP-300-3.3 MSP-300-5 MSP-300-7.5 MSP-300-12 MSP-300-15 MSP-300-24 MSP-300-36 DC VOLTAGE 3.3V 5V 7.5V 12V 15V 24V 36V 48V RATED CURRENT 60A 60A 40A 27A 22A 14A 9A 7A CURRENT RANGE 0 ~ 60A 0 ~ 60A 0 ~ 40A 0 ~ 27A 0 ~ 22A 0 ~ 14A 0 ~ 9A 0 ~ 7A RATED POWER 198W 300W 300W 324W 330W 336W 324W 336W RIPPLE & NOISE (max.) Note.2 80mVp-p 90mVp-p 100mVp-p 120mVp-p 150mVp-p 150mVp-p 250mVp-p 250mVp-p VOLTAGE ADJ. RANGE 4.3 ~ 5.8V ±2.0% 6.8 ~ 9V ±2.0% 10.2 ~ 13.8V ±1.0% 13.5 ~ 18V ±1.0% 21.6 ~ 28.8V ±1.0% 28.8 ~ 39.6V ±1.0% 40.8 ~ 55.2V ±1.0% 2.8 ~ 3.8V VOLTAGE TOLERANCE Note.3 ±2.5% PROTECTION FUNCTION MSP-300-48 LINE REGULATION ±0.5% ±0.5% ±0.5% ±0.3% ±0.3% ±0.2% ±0.2% ±0.2% LOAD REGULATION ±1.0% ±1.0% ±1.0% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% SETUP, RISE TIME 1000ms, 50ms/230VAC HOLD UP TIME (Typ.) 16ms/230VAC 87% 88% 89% 2500ms, 50ms/115VAC at full load 16ms/115VAC at full load VOLTAGE RANGE Note.5 85 ~ 264VAC FREQUENCY RANGE 47 ~ 63Hz INPUT IEC60601-1 TPTC004 120 ~ 370VDC POWER FACTOR (Typ.) PF>0.95/230VAC EFFICIENCY (Typ.) 80% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 4.5A/115VAC 35A/115VAC PF>0.99/115VAC at full load 82% 86% 88% 88% 2.25A/230VAC 70A/230VAC LEAKAGE CURRENT Earth leakage current < 450μA/264VAC , Touch leakage current < 100μA/264VAC OVERLOAD 105 ~ 135% rated output power Protection type : Constant current limiting, recovers automatically after fault condition is removed 6 ~ 7V 9.4 ~ 10.9V 14.4 ~ 16.8V 18.8 ~ 21.8V 30 ~ 34.8V 41.4 ~ 48.6V 3.96 ~ 4.62V OVER VOLTAGE 57.6 ~ 67.2V Protection type : Shut down o/p voltage, re-power on to recover OVER TEMPERATURE 5V STANDBY Shut down o/p voltage, recovers automatically after temperature goes down 5VSB : 5V@0.3A ; tolerance±5%, ripple : 50mVp-p(max.) DC OK SIGNAL PSU turns on : 3.3 ~ 5.6V ; PSU turns off : 0 ~ 1V REMOTE CONTROL RC+ / RC-: 4 ~ 10V or open = power on ; 0 ~ 0.8V or short = power off FAN CONTROL (Typ.) Load 35±15% or RTH2≧50℃ Fan on WORKING TEMP. -40 ~ +70 ℃ (Refer to "Derating Curve") 20 ~ 90% RH non-condensing WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +85 ℃ , 10 ~ 95% RH TEMP. COEFFICIENT ± 0.03%/ ℃ (0 ~ 50 ℃ ) VIBRATION 10 ~ 500Hz, 5G 10min./1cycle, 60min. each along X, Y, Z axes SAFETY & EMC (Note 4) OTHERS SAFETY STANDARDS ISOLATION LEVEL ANSI/AAMI ES60601-1, IEC60601-1, EAC TP TC 004 approved, Design refer to BS EN/EN60601-1, BS EN/EN62368-1 Primary-Secondary: 2×MOOP, Primary-Earth: 1×MOOP WITHSTAND VOLTAGE I/P-O/P:4KVAC ISOLATION RESISTANCE EMC EMISSION I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 ℃ / 70% RH Compliance to BS EN/EN55011 (CISPR11) Class B, BS EN/EN61000-3-2,-3, EAC TP TC 020 O/P-FG:0.5KVAC EMC IMMUNITY Compliance to BS EN/ EN61000-4-2,3,4,5,6,8,11, BS EN/ EN60601-1-2 , EAC TP TC 020 MTBF 176Khrs min. DIMENSION 199*105*41mm (L*W*H) 0.95Kg;15pcs/15.3Kg/0.79CUFT PACKING NOTE I/P-FG:2KVAC MIL-HDBK-217F (25 ℃ ) 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on a 360mm*360mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies. (as available on http://www.meanwell.com) 5. Derating may be needed under low input voltages. Please check the derating curve for more details. 6. No load power consumption<0.5W when RC- & RC+ (CN100 pin4,6) 0 ~ 8V or short. 7. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft). ※ Product Liability Disclaimer：For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx File Name:MSP-300-SPEC 2021-09-15

PDF

Документация на MSP-300-7.5

MSP-300-20210915.cdr

Дата модификации: 15.09.2021

Размер: 92.3 Кб

4 стр.

MSP-300 300W Single Output Medical Type E¡¡E¡½ ¡E¡E ¡E¡E ¡E ¡E¡E ¡E ¡E ¡E ¡E ¡E ¡E series Features : Universal AC input / Full range Built-in active PFC function, PF>0.95 High efficiency up to 89% Withstand 300VAC surge input for 5 seconds Protections: Short circuit / Overload / Over voltage / Over temperature Built-in constant current limiting circuit 1U low profile 41mm Medical safety approved (MOOP level) Built-in cooling fan ON-OFF control Built-in DC OK signal Built-in remote ON-OFF control Standby 5V@0.3A Built-in remote sense function No load power consumption<0.5W (Note.6) 5 years warranty SPECIFICATION MODEL OUTPUT MSP-300-3.3 MSP-300-5 MSP-300-7.5 MSP-300-12 MSP-300-15 MSP-300-24 MSP-300-36 MSP-300-48 DC VOLTAGE 3.3V 5V 7.5V 12V 15V 24V 36V 48V RATED CURRENT 60A 60A 40A 27A 22A 14A 9A 7A CURRENT RANGE 0 ~ 60A 0 ~ 60A 0 ~ 40A 0 ~ 27A 0 ~ 22A 0 ~ 14A 0 ~ 9A 0 ~ 7A RATED POWER 198W 300W 300W 324W 330W 336W 324W 336W RIPPLE & NOISE (max.) Note.2 80mVp-p 90mVp-p 100mVp-p 120mVp-p 150mVp-p 150mVp-p 250mVp-p 250mVp-p VOLTAGE ADJ. RANGE 4.3 ~ 5.8V 2.0% 6.8 ~ 9V 2.0% 10.2 ~ 13.8V 1.0% 13.5 ~ 18V 1.0% 21.6 ~ 28.8V 1.0% ¡Ó Ó¡ 0.2% ¡Ó0.5% 28.8 ~ 39.6V 1.0% ¡Ó Ó¡ 0.2% ¡Ó0.5% 40.8 ~ 55.2V 1.0% 87% 88% 89% 2.8 ~ 3.8V VOLTAGE TOLERANCE Note.3 2.5% LOAD REGULATION ¡Ó Ó¡ 0.5% ¡Ó1.0% SETUP, RISE TIME 1000ms, 50ms/230VAC HOLD UP TIME (Typ.) 16ms/230VAC LINE REGULATION ¡Ó Ó¡ 0.5% ¡Ó1.0% PF>0.95/230VAC EFFICIENCY (Typ.) 80% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 4.5A/115VAC 35A/115VAC OVERLOAD PROTECTION OVER VOLTAGE ¡Ó Ó¡ 0.3% ¡Ó0.5% ¡Ó Ó¡ 0.2% ¡Ó0.5% 2500ms, 50ms/115VAC at full load 120 ~ 370VDC POWER FACTOR (Typ.) LEAKAGE CURRENT ¡Ó Ó¡ 0.3% ¡Ó0.5% 16ms/115VAC at full load VOLTAGE RANGE Note.5 85 ~ 264VAC 47 ~ 63Hz FREQUENCY RANGE INPUT ¡Ó Ó¡ 0.5% ¡Ó1.0% PF>0.99/115VAC at full load 82% 86% 88% 88% 2.25A/230VAC 70A/230VAC £g £g Earth leakage current < 450 A/264VAC , Touch leakage current < 100 A/264VAC 105 ~ 135% rated output power Protection type : Constant current limiting, recovers automatically after fault condition is removed 6 ~ 7V 9.4 ~ 10.9V 14.4 ~ 16.8V 18.8 ~ 21.8V 30 ~ 34.8V 41.4 ~ 48.6V 3.96 ~ 4.62V 57.6 ~ 67.2V Protection type : Shut down o/p voltage, re-power on to recover 5V STANDBY ¢J ¡Ó5¢J (TSW1: detect on heatsink of power transistor) ¢J ¡Ó5¢J for 3.3V,5V,7.5V ; 95¢J ¡Ó5¢J for others (TSW2: detect on heatsink of power diode) Protection type : Shut down o/p voltage, recovers automatically after temperature goes down 5VSB : 5V@0.3A ; tolerance ¡Ó 5%, ripple : 50mVp-p(max.) DC OK SIGNAL PSU turns on : 3.3 ~ 5.6V ; PSU turns off : 0 ~ 1V 90 OVER TEMPERATURE FUNCTION 100 REMOTE CONTROL RC+ / RC-: 4 ~ 10V or open = power on ; 0 ~ 0.8V or short = power off FAN CONTROL (Typ.) Load 35 15% or RTH2 WORKING TEMP. -40 ~ +70 ¡Ó ¡Ù50¢J Fan on ¢J (Refer to "Derating Curve") 20 ~ 90% RH non-condensing WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +85 , 10 ~ 95% RH TEMP. COEFFICIENT 0.03%/ (0 ~ 50 ) VIBRATION 10 ~ 500Hz, 5G 10min./1cycle, 60min. each along X, Y, Z axes ¡Ó SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC (Note 4) EMC EMISSION OTHERS ¢J ANSI/AAMI ES60601-1, IEC60601-1 approved I/P-O/P:4KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC ¢J I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH Compliance to EN55011 (CISPR11) Class B, EN61000-3-2,-3 EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11, EN60601-1-2 MTBF 176Khrs min. DIMENSION 199*105*41mm (L*W*H) 0.95Kg;15pcs/15.3Kg/0.69CUFT PACKING NOTE ¢J ¢J ¢J MIL-HDBK-217F (25 ) ¢J 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies. (as available on http://www.meanwell.com) 5. Derating may be needed under low input voltages. Please check the derating curve for more details. 6. No load power consumption<0.5W when RC- & RC+ (CN100 pin4,6) 0 ~ 8V or short. File Name:MSP-300-SPEC 2012-08-22

PDF

Документация на серию MSP-300

MSP-300.cdr Keywords:

Дата модификации: 28.08.2012

Размер: 137.9 Кб

4 стр.

найти MSP-300.pdf

Товары серии MSP-300

Наименование	i	Упаковка	P вых	Выход	U1	I1	КПД	Шум
MSP-300-12 (MW)		1 шт
MSP-300-15 (MW)		1 шт
MSP-300-24 (MW)		в коробках 5 шт
MSP-300-3.3 (MW)
MSP-300-36 (MW)		1 шт
MSP-300-48 (MW)		1 шт
MSP-300-5 (MW)		1 шт
MSP-300-7.5 (MW)		1 шт

MSP-300 публикации

16 августа 2023

статья

Сигма-дельта, SAR и конвейерные АЦП Ruimeng, доступные со склада КОМПЭЛ

Константин Кузьминов (г. Заполярный) АЦП производства Ruimeng выполнены по всем широко применяемым архитектурам. Среди продукции этой китайской компании есть АЦП последовательного приближения (SAR), параллельного, конвейерного (Pipeline) типа и... ...читать

16 июня 2014

новость

MSP-600 – серия мощных источников питания для медицинских устройств

Компания MEAN WELL расширила семейство источников питания медицинского назначения MSP, выпустив серию MSP–600 с выходной мощностью 600 Вт. Источники питания по электробезопасности соответствуют требованиям стандарта IEC60601–1 уровень... ...читать

23 декабря 2013

новость

MSP-450 – источники питания для медицинских приложений от MEAN WELL

Компания MEAN WELL расширила линейку мощных источников питания для устройств медицинского назначения, представив новую серию MSP–450. Новая серия источников питания имеет выходную мощность 450 Вт и выпускается в закрытом металлическом... ...читать

19 февраля 2013

новость

MSP-100 – новая серия медицинских источников питания от MEAN WELL

Компания MEAN WELL представила новую эффективную серию высоконадежных источников питания медицинского назначения MSP–100. Новая серия расширяет существующую линейку сетевых AC–DC преобразователей питания MSP–300 и MSP–200... ...читать

15 октября 2012

новость

Новый источник питания MSP-300 для медицинских применений от MEAN WELL

Компания MEAN WELL представила новый источник питания закрытого типа MSP–300 мощностью 300 Вт. Источник предназначен для применения в медицинском, химическом и биологическом оборудовании, требующем низкий ток утечки, а также для любых... ...читать