Серия AC-DC сетевых преобразователей NET-50

Общие характеристики

	Раздел	AC-DC сетевые преобразователи
	Напряжение 1 канала
	Выходной ток 1 канала
	Тип стабилизации
	Вход
	Конструктивное исполнение
	Возможности
	Типы защиты	КЗ, перегрузка, перенапряжение
	Количество выходов
	Тип управления выходом
	Исполнение
	Входное напряжение AC
	Входное напряжение DC
	Коэффициент мощности
	Напряжение изоляции вход-выход
	Напряжение изоляции вход-земля
	Напряжение изоляции выход-земля
	Применение
	Шум
	Размер	129×98×38 мм
	Рабочая температура

Документация на серию NET-50

N E T- 5 0 50W Triple Output Switching Power Supply series ■ Features : •Universal AC input / Full range •Protections: Short circuit / Overload / Over voltage •Cooling by free air convection •100% full load burn-in test •2 years warranty SPECIFICATION MODEL NET-50A CH3 CH1 CH2 CH3 CH1 CH2 CH3 CH1 CH2 CH3 DC VOLTAGE 5V 12V -5V 5V 12V -12V 5V 15V -15V 5V 24V 12V RATED CURRENT 4A 2A 0.5A 4A 2A 0.5A 4A 1.5A 0.5A 3A 1A 1A 0.1 ~ 2A 0.1 ~ 0.7A 0.6 ~ 5A Note.6 0.6 ~ 5A VOLTAGE ADJ. RANGE 50W 0.1 ~ 1.5A 0.1 ~ 1.5A 51W ±5.0% CH1: 4.75 ~ 5.5V ±6.0% ±2.0% ±5.0% CH1: 4.75 ~ 5.5V ±8.0% ±2.0% ±5.0% CH1: 4.75 ~ 5.5V ±8.0% ±2.0% ±6.0% LINE REGULATION Note.4 ±0.5% ±1.0% ±1.0% ±0.5% ±1.0% ±1.0% ±0.5% ±1.0% ±1.0% ±0.5% ±1.0% ±1.0% LOAD REGULATION Note.5 ±1.5% ±3.0% ±1.0% ±1.5% ±3.0% ±1.0% ±1.5% ±3.0% ±1.0% ±1.5% ±3.0% ±3.0% L EO CH1:4.75 ~ 5.5V VOLTAGE TOLERANCE Note.3 ±2.0% ±6.0% SETUP, RISE TIME 500ms, 30ms/230VAC HOLD UP TIME (Typ.) 50ms/230VAC VOLTAGE RANGE 85 ~ 264VAC FREQUENCY RANGE EFFICIENCY (Typ.) 47 ~ 63Hz 76% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 1.1A/115VAC 0.65A/230VAC COLD START 45A 1200ms, 30ms/115VAC at full load 10ms/115VAC at full load 120 ~ 370VDC 78% 78% LEAKAGE CURRENT <2mA / 240VAC OVERLOAD 110 ~ 150% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed OVER VOLTAGE CH1: 5.75 ~ 6.75V Protection type : Shut down o/p voltage, re-power on to recover WORKING TEMP. -20 ~ +60℃ (Refer to "Derating Curve") TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMC EMISSION EMC IMMUNITY MTBF DIMENSION PACKING NOTE 0.2 ~ 2.5A 0.1 ~ 0.7A 0.6 ~ 5A 50W 46.5W WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY OTHERS 0.2 ~ 2.5A 0.1 ~ 0.7A 0.6 ~ 5A RIPPLE & NOISE (max.) Note.2 80mVp-p 120mVp-p 120mVp-p 80mVp-p 120mVp-p 120mVp-p 80mVp-p 150mVp-p 150mVp-p 80mVp-p 200mVp-p 120mVp-p PROTECTION (Note 7) NET-50D CH2 RATED POWER INPUT NET-50C CH1 CURRENT RANGE OUTPUT NET-50B OUTPUT NUMBER 80% 20 ~ 90% RH non-condensing -40 ~ +85℃, 10 ~ 95% RH ±0.03%/℃ (0 ~ 45℃) 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes UL60950-1, CB(IEC60950-1) approved I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61000-6-1, light industry level, criteria A 348.4K hrs min. MIL-HDBK-217F (25℃) 129*98*38mm (L*W*H) 0.44Kg; 30pcs/14.2Kg/0.72CUFT 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Line regulation is measured from low line to high line at rated load. 5. Load regulation is measured from 20% to 100% rated load, and other output at 60% rated load. 6. Each output can work within current range. But total output power can't exceed rated output power. 7. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies. (as available on http://www.meanwell.com) File Name:NET-50-SPEC 2012-09-24

Документация на NET-50D

NET-50.cdr

Дата модификации: 14.01.2020

Размер: 95.6 Кб

2 стр.

N E T- 5 0 50W Triple Output Switching Power Supply series Features : Universal AC input/Full range Protections:Short circuit/Over load/Over voltage Cooling by free air convection 100% full load burn-in test 2 years warranty SPECIFICATION NET-50A MODEL NET-50D CH2 CH3 CH1 CH2 CH3 CH1 CH2 CH3 CH1 CH2 DC VOLTAGE 5V 12V -5V 5V 12V -12V 5V 15V -15V 5V 24V 12V RATED CURRENT 4A 2A 0.5A 4A 2A 0.5A 4A 1.5A 0.5A 3A 1A 1A 0.1 ~ 2A 0.1 ~ 0.7A 0.6 ~ 5A Note.6 0.6 ~ 5A 0.2 ~ 2.5A 0.1 ~ 0.7A 0.6 ~ 5A 0.2 ~ 2.5A 0.1 ~ 0.7A 0.6 ~ 5A 50W 46.5W RATED POWER 50W CH3 0.1 ~ 1.5A 0.1 ~ 1.5A 51W RIPPLE & NOISE (max.) Note.2 80mVp-p 120mVp-p 120mVp-p 80mVp-p 120mVp-p 120mVp-p 80mVp-p 150mVp-p 150mVp-p 80mVp-p 200mVp-p 120mVp-p VOLTAGE ADJ. RANGE VOLTAGE TOLERANCE Note.3 INPUT NET-50C CH1 CURRENT RANGE OUTPUT NET-50B OUTPUT NUMBER CH1:4.75 ~ 5.5V 2.0% 6.0% 5.0% CH1: 4.75 ~ 5.5V 2.0% 6.0% 5.0% CH1: 4.75 ~ 5.5V 2.0% 8.0% 5.0% CH1: 4.75 ~ 5.5V 2.0% 8.0% 6.0% LINE REGULATION Note.4 0.5% 1.0% 1.0% 0.5% 1.0% 1.0% 0.5% 1.0% 1.0% 0.5% 1.0% 1.0% LOAD REGULATION Note.5 1.5% 3.0% 1.0% 1.5% 3.0% 1.0% 1.5% 3.0% 1.0% 1.5% 3.0% 3.0% SETUP, RISE TIME 500ms, 30ms/230VAC 1200ms, 30ms/115VAC at full load HOLD TIME (Typ.) 50ms/230VAC VOLTAGE RANGE 85 ~ 264VAC FREQUENCY RANGE EFFICIENCY (Typ.) 47 ~ 63Hz 76% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 1.1A/115VAC 0.65A/230VAC COLD START 45A 10ms/115VAC at full load 120 ~ 370VDC 78% 78% LEAKAGE CURRENT <2mA / 240VAC OVER LOAD 110 ~ 150% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed OVER VOLTAGE CH1: 5.75 ~ 6.75V Protection type : Shut down o/p voltage, re-power on to recover WORKING TEMP. -20 ~ +60 PROTECTION WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE 80% (Refer to output load derating curve) 20 ~ 90% RH non-condensing -40 ~ +85 , 10 ~ 95% RH 0.03%/ (0 ~ 45 ) 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes UL60950-1, CB(IEC60950-1) Approved I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC SAFETY & ISOLATION RESISTANCE EMC (Note 6) OTHERS I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B Compliance to EN61000-3-2,-3 HARMONIC CURRENT EMS IMMUNITY Compliance to EN61000-4-2, 3, 4, 5, 6, 8,11, ENV50204, EN55024, EN61000-6-1 Light industry level, criteria A MTBF 348.4K hrs min. MIL-HDBK-217F (25 129*98*38mm (L*W*H) 0.44Kg; 45pcs/21Kg/1.24CUFT DIMENSION PACKING NOTE ) 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Line regulation is measured from low line to high line at rated load. 5. Load regulation is measured from 20% to 100% rated load, and other output at 60% rated load. 6. Each output can work within current range. But total output power can't exceed rated output power. 7. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. File Name:NET-50-SPEC 2006-10-31

Документация на серию NET-50

NET-50.cdr

Дата модификации: 04.12.2006

Размер: 421.7 Кб

2 стр.

найти NET-50.pdf

Товары серии NET-50

Наименование	i	Упаковка	P вых	Выход	КПД
NET-50A (MW)		30 шт
NET-50B (MW)		1 шт
NET-50C (MW)		1 шт
NET-50D (MW)		1 шт

NET-50 публикации

29 сентября 2009

новость

Серия G1 MEAN WELL снимается с производства и заменяется на серию NES

Компания MEAN WELL (MW) объявила о том, что серия популярных источников питания G1 (S–15, S–35, S–50, S–100, S–145) снимается с производства с 1 января 2010 года. Полноценной заменой являются источники питания серии... ...читать