Серия DC-DC модульных преобразователей PSD-45

Общие характеристики

Раздел DC-DC модульные преобразователи
Монтаж
Количество каналов
Комплекс защит
Схема параллельного включения
Напряжение изоляции вход-выход
Напряжение изоляции вход-земля
Сертификаты медицинские
Размер 76×127×30 мм
Рабочая температура

Документация на серию PSD-45

P S D - 4 5 series 45W DC-DC Single Output Switching Power Supply ■ Features : User’s Manual 2:1 wide input range Protections:Short circuit/Over load /Over voltage/ Polarity Cooling by free air convection Built-in EMI filter, low ripple noise 100% full load burn-in test Fixed switching frequency at 96 KHZ Low cost High reliability 2 year warranty Bauar t gepruft Sicherheit egel ma ge od o s be wac g www. tuv.com ID 2000000000 SPECIFICATION PSD-45B-05 PSD-45C-05 PSD-45A-12 PSD-45B-12 PSD-45C-12 PSD-45A-24 PSD-45B-24 PSD-45C-24 5V 5V 5V 6A 0 ~ 6A 9A 0 ~ 9A 9A 0 ~ 9A 12V 2.5A 0 ~ 2.5A 12V 3.75A 0 ~ 3.75A 12V 3.75A 0 ~ 3.75A 24V 1.25A 24V 1.875A 24V 1.875A RATED POWER RIPPLE & NOISE (max.) Note.2 30W 45W 45W 30W 45W 45W 0 ~ 1.875A 45W 0 ~ 1.875A 45W 100mVp-p 120mVp-p 0 ~ 1.25A 30W 150mVp-p VOLTAGE ADJ RANGE 4.5 ~ 5.5V VOLTAGE TOLERANCE Note.3 ± 2.0% 10.8 ~13.2V ± 2.0% 21.6 ~ 26.4V ± 2.0% LINE REGULATION LOAD REGULATION ± 1.0% ± 1.0% ± 0.5% ± 1.0% ± 1.0% ± 0.5% SETUP, RISE, HOLD UP TIME 1000ms, 50ms, ----/12VDC/24VDC at full load; 1500ms,50ms,----48VDC at full load 85% 86% DC VOLTAGE RATED CURRENT CURRENT RANGE INPUT IEC62368-1 PSD-45A-05 MODEL OUTPUT BS EN/EN62368-1 TPTC004 VOLTAGE RANGE A: 9.2 ~18VDC (12VDC) EFFICIENCY(Typ.) 78% 74% 80% 77% 3.5A/12VDC 2.5A/24VDC 1.2A/48VDC 105% -160% rated output power DC CURRENT(Typ.) OVER LOAD B:18 ~ 36VDC (24VDC) C:36~72VDC(48VDC) 82% 83% 79% Protection type :shut down, Re-power on after fault condition is removed PROTECTION OVER VOLTAGE 5.75 ~ 6.75V/10%load 13.8~ 16.2V/10%load 27.6 ~ 32.4V/10%load Protection type : Hiccup mode, recovery automatically after fault condition is removed ENVIRONMENT SAFETY & EMC WORKING TEMP. -10 ~ +60℃ (Refer to output load derating curve),20~90%RH non-condensing WORKING HUMIDITY 20 ~ 95% RH non-condensing STORAGE TEMP., HUMIDITY -20 ~ +85℃, 10 ~ 95% RH TEMP. COEFFICIENT ±0.05%/℃ (0 ~ 50℃) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, Period for 60min.each along X, Y, Z axes SAFETY STANDARDS TUV BS EN/EN62368-1, EAC TP TC 004 approved WITHSTAND VOLTAGE I/P-O/P:1.5KVAC ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC / 25℃/ 70% RH I/P-FG:2.0KVAC O/P-FG:0.5KVAC EMI CONDUCTION&RADIATION Compliance to BS EN/EN55032(CISPR32) CLASS B, EAC TP TC 020 EMS IMMUNITY OTHERS MTBF 329.3Khrs min. DIMENSION 127*76*30mm (L*W*H) 0.19Kg;72pcs/15.6Kg/1.28CUFT PACKING NOTE Compliance to BS EN/EN61000-4-2,3,4,6,8,BS EN/EN55024,BS EN/EN61000-6-1 Light industry level, criteria A,EAC TP TC 020 MIL-HDBK-217F (25℃) 1.All parameters NOT specially mentioned are measured at normal input,rated load and 25℃ of ambient temperature. 2.Ripple & noise are measued at 20 MHz of bandwidth by using a 12inch twisted pair-wire termined with a 0.1uf & 47uf capacitor. 3.Tolerance:includes set up tolerance,line regulation and load regulation. 4.The interval of turning ON and OFF the power supply continuously is 2 seconds. 5.The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft). ※ Product Liability Disclaimer:For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx File Name:PSD-45 SPEC 2021-09-15 PDF
Документация на PSD-45C-24 

PSD-45-20210915.cdr

Дата модификации: 02.12.2021

Размер: 114.2 Кб

2 стр.

P S D - 4 5 series 45W DC-DC Single Output Switching Power Supply Features : 2:1 wide input range Protections:Short circuit/Over load /Over voltage/Polarity Cooling by free air convection Built-in EMI filter, low ripple noise 100% full load burn-in test Fixed switching frequency at 96 KHZ Low cost High reliability 2 year warranty SPECIFICATION PSD-45A-05 PSD-45B-05 PSD-45C-05 PSD-45A-12 PSD-45B-12 PSD-45C-12 PSD-45A-24 PSD-45B-24 PSD-45C-24 5V 5V 5V 6A 0 ~ 6A 9A 0 ~ 9A 9A 0 ~ 9A 12V 2.5A 0 ~ 2.5A 12V 3.75A 0 ~ 3.75A 12V 3.75A 0 ~ 3.75A 24V 1.25A 24V 1.875A 24V 1.875A RATED POWER RIPPLE & NOISE (max.) Note.2 30W 45W 45W 30W 45W 45W 0 ~ 1.875A 45W 0 ~ 1.875A 45W 100mVp-p 120mVp-p 0 ~ 1.25A 30W 150mVp-p VOLTAGE ADJ RANGE 4.5 ~ 5.5V 10.8 ~13.2V 2.0% 21.6 ~ 26.4V 2.0% 85% 86% MODEL DC VOLTAGE RATED CURRENT CURRENT RANGE OUTPUT VOLTAGE TOLERANCE Note.3 2.0% LINE REGULATION LOAD REGULATION 1.0% 1.0% 0.5% 1.0% 1.0% 0.5% SETUP, RISE, HOLD UP TIME INPUT VOLTAGE RANGE A: 9.2 ~18VDC (12VDC) EFFICIENCY(Typ.) 78% 74% 80% 77% 3.5A/12VDC 2.5A/24VDC 1.2A/48VDC 105% -160% rated output power DC CURRENT(Typ.) OVER LOAD OVER VOLTAGE 5.75 ~ 6.75V/10%load C:36~72VDC(48VDC) 82% 83% 79% WORKING TEMP. -10 ~ +60 20 ~ 95% RH non-condensing STORAGE TEMP., HUMIDITY -20 ~ +85 VIBRATION 13.8~ 16.2V/10%load 27.6 ~ 32.4V/10%load Protection type : Hiccup mode, recovery automatically after fault condition is removed WORKING HUMIDITY TEMP. COEFFICIENT SAFETY & EMC B:18 ~ 36VDC (24VDC) Protection type :shut down, Re-power on/10% load after fault condition is removed PROTECTION ENVIRONMENT 1000ms, 50ms, ----/12VDC/24VDC at full load; 1500ms,50ms,----48VDC at full load 0.05%/ (Refer to output load derating curve),20~90%RH non-condensing , 10 ~ 95% RH (0 ~ 50 ) 10 ~ 500Hz, 2G 10min./1cycle, Period for 60min.each along X, Y, Z axes SAFETY STANDARDS EN60950-1 CB approved by TUV WITHSTAND VOLTAGE I/P-O/P:1.5KVAC ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC I/P-FG:1.5KVAC O/P-FG:0.5KVAC EMI CONDUCTION&RADIATION Compliance to EN55022(CISPR22) CLASS B EMS IMMUNITY OTHERS MTBF 329.3Khrs min. DIMENSION 127*76*30mm (L*W*H) 0.19Kg;72pcs/15.6Kg/1.35CUFT PACKING NOTE Compliance to EN61000-4-2, 3, 4, 6, 8 EN55024, EN61000-6-1 Light industry level, criteria A MIL-HDBK-217F (25 ) 1.All parameters NOT specially mentioned are measured at normal input,rated load and 25 of ambient temperature. 2.Ripple & noise are measued at 20 MHz of bandwidth by using a 12inch twisted pair-wire termined with a 0.1uf & 47uf capacitor. 3.Tolerance:includes set up tolerance,line regulation and load regulation. 4.The interval of turning ON and OFF the power supply continuously is 2 seconds. File Name:PSD-45 SPEC 2009-11-09 PDF
Документация на серию PSD-45 

PSD-45.cdr

Дата модификации: 25.03.2010

Размер: 443.9 Кб

2 стр.

    Товары серии PSD-45

    Наименование i Упаковка P вых U вх Выход Возможности U вх ном. U1 I1 Шум КПД
    PSD-45A-05 (MW)
     
    DC-DC модульный преобразователь - Монтаж: открытый; P вых: 45 Вт; #: 1; U вх: 9.2...18 ...
    PSD-45A-12 (MW)
     
    DC-DC модульный преобразователь - Монтаж: открытый; P вых: 45 Вт; #: 1; U вх: 9.2...18 ... 1 шт
    PSD-45A-24 (MW)
     
    DC-DC модульный преобразователь - Монтаж: открытый; P вых: 45 Вт; #: 1; U вх: 9.2...18 ... 1 шт
    PSD-45A-5 (MW)
     
    DC-DC модульный преобразователь - Монтаж: открытый; P вых: 45 Вт; #: 1; U вх: 9.2...18 ... в коробках 8 шт
    PSD-45B-05 (MW)
     
    DC-DC модульный преобразователь - Монтаж: открытый; P вых: 45 Вт; #: 1; U вх: 18...36 В... 1 шт
    PSD-45B-12 (MW)
     
    DC-DC модульный преобразователь - Монтаж: открытый; P вых: 45 Вт; #: 1; U вх: 18...36 В... 8 шт
    PSD-45B-24 (MW)
     
    DC-DC модульный преобразователь - Монтаж: открытый; P вых: 45 Вт; #: 1; U вх: 18...36 В... 1 шт
    PSD-45C-05 (MW)
     
    DC-DC модульный преобразователь - Монтаж: открытый; P вых: 45 Вт; #: 1; U вх: 37...72 В... 1 шт
    PSD-45C-12 (MW)
     
    DC-DC модульный преобразователь - Монтаж: открытый; P вых: 45 Вт; #: 1; U вх: 37...72 В... в коробках 8 шт
    PSD-45C-24 (MW)
     
    DC-DC модульный преобразователь - Монтаж: открытый; P вых: 45 Вт; #: 1; U вх: 37...72 В... 1 шт
    PSD-45C-5 (MW)
     
    CONVERTER,DC-DC,45W,5V@9A 37-72Vin,OPEN,EMI FILTER,CE/CB