Серия AC-DC сетевых преобразователей PT-45

MEAN WELL

Общие характеристики

 Раздел AC-DC сетевые преобразователи
Тип стабилизации
Вход
Конструктивное исполнение
Возможности
Типы защиты КЗ, перегрузка, перенапряжение
Количество выходов
Тип управления выходом
Исполнение
Входное напряжение AC
Коэффициент мощности
Напряжение изоляции вход-выход
Напряжение изоляции вход-земля
Напряжение изоляции выход-земля
Применение
Шум
Размер 127×76×28 мм
Рабочая температура

Документация на серию PT-45

P T- 4 5 0 3 45W Triple Output with 3.3V output User’s Manual ■ Features : Universal AC input / Full range Protections: Short circuit / Overload / Over voltage Cooling by free air convection 100% full load burn-in test Fixed switching frequency at 65KHz 2 years warranty Bauar t gepruft Sicherheit egel ma ge od o s be wac g SPECIFICATION MODEL INPUT DC VOLTAGE CH1 3.3V CH2 5V RATED CURRENT 4A 4A 1A CURRENT RANGE 0 ~ 5A 0.2 ~ 7A 0 ~ 1.2A RATED POWER Total power max. 45.2W(CH1+CH2 max. 35W) RIPPLE & NOISE (max.) Note.2 50mVp-p VOLTAGE ADJ. RANGE 50mVp-p 100mVp-p +4,-2% ±8.0% ±1.0% ±1.0% ±2.0% LOAD REGULATION SETUP, RISE TIME ±2.0% 800ms, 50ms at full load ±2.0% ±8.0% HOLD UP TIME (Typ.) 60ms at full load VOLTAGE RANGE 90 ~ 264VAC FREQUENCY RANGE 47 ~ 63Hz EFFICIENCY (Typ.) 72% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 1.2A/115VAC PROTECTION OVER VOLTAGE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMC EMISSION EMC IMMUNITY MTBF DIMENSION PACKING NOTE IEC62368-1 CH1: 3 ~ 3.6V VOLTAGE TOLERANCE Note.3 ±2.0% OVERLOAD OTHERS TPTC004 CH3 12V LINE REGULATION LEAKAGE CURRENT (Note 4) EN62368-1 UL62368-1 PT-4503 OUTPUT NUMBER OUTPUT www. tuv.com ID 2000000000 [DC input operation possible by connecting AC/N(-), AC/L(+)] 127 ~ 370VDC 0.7A/230VAC COLD START 20A/115V <1mA / 240VAC 40A/230V 120 ~ 160% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed 5.75 ~ 6.75V on +5V Protection type : Hiccup mode, recovers automatically after fault condition is removed -10 ~ +60℃ (Refer to "Derating Curve") 20 ~ 90% RH non-condensing -20 ~ +85℃, 10 ~ 95% RH ±0.03%/℃ (0 ~ 50℃) 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes UL62368-1, TUV EN62368-1, EAC TP TC 004 approved I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC 1min. I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH Compliance to EN55032 (CISPR32) Class B, EN61000-3-2,-3, EAC TP TC 020 Compliance to EN61000-4-2,3,4,5,6,11, light industry level, criteria A, EAC TP TC 020 220.9Khrs min. MIL-HDBK-217F (25℃) 127*76*28mm (L*W*H) 0.23Kg; 72pcs/17.6Kg/1.28CUFT 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on a 360mm*360mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on http://www.meanwell.com) 5. Mounting holes M1 and M2 should be grounded for EMI purposes. 6. Heat Sink HS1,HS2 can not be shorted. 7. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft). File Name:PT-4503-SPEC 2021-09-15 PDF
Документация на PT-4503 

PT-4503-20210915.cdr

Дата модификации: 17.09.2021

Размер: 88.1 Кб

2 стр.

P T- 4 5 45W Triple Output Switching Power Supply series Features : Universal AC input/Full range Low leakage current<0.5mA Protections: Short circuit / Overload / Over voltage Cooling by free air convection 100% full load burn-in test Fixed switching frequency at 65KHz 2 years warranty SPECIFICATION MODEL OUTPUT PT-45A PT-45B PT-45C OUTPUT NUMBER CH1 CH2 CH3 CH1 CH2 CH3 CH1 CH2 CH3 DC VOLTAGE 5V 12V -5V 5V 12V -12V 5V 15V -15V RATED CURRENT 3A 2A 0.3A 3A 2A 0.3A 3A 1.6A 0.3A CURRENT RANGE 0.4 ~ 5A 0.2 ~ 2.5A 0 ~ 0.5A 0.4 ~ 5A 0.2 ~ 2.5A 0 ~ 0.5A 0.4 ~ 5A 0.2 ~ 2.3A 0 ~ 0.5A RATED POWER 40.5W OUTPUT POWER (max.) Rated output power for convection; 52W with 18CFM min. Forced air 120mVp-p 100mVp-p 42.6W RIPPLE & NOISE (max.) Note.2 50mVp-p 120mVp-p 50mVp-p 50mVp-p 43.5W 120mVp-p 100mVp-p 50mVp-p VOLTAGE ADJ. RANGE CH1:4.75 ~ 5.5V VOLTAGE TOLERANCE Note.3 4.0% 7.0% INPUT 5.0% 4.0% 7.0% 5.0% 4.0% 7.0% 5.0% LINE REGULATION 1.0% 2.0% 1.0% 1.0% 2.0% 1.0% 1.0% 2.0% 1.0% LOAD REGULATION 3.0% 4.0% 1.0% 3.0% 4.0% 1.0% 3.0% 4.0% 1.0% SETUP, RISE TIME 800ms, 20ms at full load HOLD UP TIME (Typ.) 60ms at full load VOLTAGE RANGE 90 ~ 264VAC FREQUENCY RANGE 47 ~ 440Hz EFFICIENCY (Typ.) 75% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 1A/115VAC LEAKAGE CURRENT OVERLOAD PROTECTION OVER VOLTAGE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE SAFETY & EMC (Note 4) NOTE 75% 75% 0.7A/230VAC COLD START 15A/115VAC <0.75mA 30A/230VAC 53 ~ 75W rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed. CH1: 5.75 ~ 6.75VDC Protection type : Hiccup mode, recovers automatically after fault condition is removed. -10 ~ +60 (Refer to output load derating curve) 20 ~ 90% RH non-condensing -20 ~ +85 , 10 ~ 95% RH 0.04%/ (0 ~ 50 ) on +5V output 10 ~ 500Hz, 2G 10min./1cycle, Period for 60min.each along X, Y, Z axes UL60950, TUV EN60950-1 Approved I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC 1min. ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B HARMONIC CURRENT Compliance to EN61000-3-2,-3 EMS IMMUNITY MTBF OTHERS 127 ~370VDC DIMENSION PACKING Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, Light industry level, criteria A 288.1K hrs min. MIL-HDBK-217F (25 127*76*28mm (L*W*H) 0.21Kg; 72pcs/17Kg/1.35CUFT ) 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. 5. Mounting holes M1 and M2 should be grounded for EMI purposes. File Name:PT-45-SPEC 2006-12-19 PDF
Документация на серию PT-45 

PT-45.cdr

Дата модификации: 02.01.2007

Размер: 336.5 Кб

2 стр.

P T- 4 5 0 3 45W Triple Output with 3.3V output Features : Universal AC input / Full range Protections:Short circuit/Over load/Over voltage Cooling by free air convection 100% full load burn-in test Fixed switching frequency at 65KHz 2 years warranty SPECIFICATION MODEL PT-4503 OUTPUT NUMBER OUTPUT INPUT DC VOLTAGE CH1 3.3V CH2 5V CH3 12V RATED CURRENT 4A 4A 1A CURRENT RANGE 0 ~ 5A 0.2 ~ 7A 0 ~ 1.2A RATED POWER Total power max. 45.2W(CH1+CH2 max. 35W) RIPPLE & NOISE (max.) Note.2 50mVp-p VOLTAGE ADJ. RANGE 2.0% +4,-2% 8.0% LINE REGULATION 1.0% 1.0% 2.0% 2.0% 8.0% LOAD REGULATION SETUP, RISE TIME 2.0% 800ms, 50ms at full load HOLD TIME (Typ.) 60ms at full load VOLTAGE RANGE 90 ~ 264VAC FREQUENCY RANGE 47 ~ 63Hz EFFICIENCY (Typ.) 72% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 1.2A/115VAC OVER LOAD PROTECTION OVER VOLTAGE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE SAFETY & ISOLATION RESISTANCE EMI CONDUCTION & RADIATION EMC (Note 4) HARMONIC CURRENT 127 ~ 370VDC 0.7A/230VAC COLD START 20A/115V <1mA / 240VAC 40A/230V 120 ~ 160% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed 5.75 ~ 6.75V on +5V Protection type : Hiccup mode, recovers automatically after fault condition is removed -10 ~ +60 (Refer to output load derating curve) 20 ~ 90% RH non-condensing -20 ~ +85 , 10 ~ 95% RH 0.03%/ (0 ~ 50 ) 10 ~ 500Hz, 2G 10min./1cycle, Period for 60min.each along X, Y, Z axes UL60950-1, TUV EN60950-1 Approved I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC 1min. I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC Compliance to EN55022 (CISPR22) Class B Compliance to EN61000-3-2,-3 EMS IMMUNITY Compliance to EN61000-4-2,3,4,5,6,11 Light industry level, criteria A MTBF 220.9Khrs min. MIL-HDBK-217F (25 127*76*28mm (L*W*H) 0.23Kg; 72pcs/17.6Kg/1.35CUFT DIMENSION PACKING NOTE 100mVp-p VOLTAGE TOLERANCE Note.3 LEAKAGE CURRENT OTHERS 50mVp-p CH1: 3 ~ 3.6V ) 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. 5. Mounting holes M1 and M2 should be grounded for EMI purposes. File Name:PT-4503-SPEC 2006-01-27 PDF
Документация PT-4503 

Pt-4503.cdr

Дата модификации: 07.02.2006

Размер: 158.4 Кб

2 стр.

    Товары серии PT-45

    Наименование i Упаковка P вых Выход U1 I1 U вх DC КПД
    PT-4503 (MW)
     
    		AC-DC сетевой преобразователь - P вых: 45 Вт; Выход: 3.3 В, 5 В, 12 В; U1: 3...3.6 В; I... в коробках 8 шт
    PT-45A (MW)
     
    		AC-DC сетевой преобразователь - P вых: 40 Вт; Выход: 5 В, 12 В, -5 В; U1: 4.75...5.5 В;... в коробках 8 шт
    PT-45B (MW)
     
    		Преобразователь напряжения AC-DC на шасси. 42.6Вт, Uвх=90-264VAC (127-370VDC), три выхо... 72 шт
    PT-45C (MW)
     
    		Преобразователь напряжения AC-DC на шасси. 43.5Вт, Uвх=90-264VAC (127-370VDC), три выхо... 8 шт

    PT-45 публикации

    10 апреля 2025
    статья

    Азиатские датчики температуры для промышленности, бытовых приборов и автомобильной электроники

    Александр Калачев (г. Барнаул) Мониторинг и контроль температуры необходимы во многих устройствах и приборах. Сложно найти электронную систему, в которой не присутствовал бы тот или иной температурный датчик. Каждая область применения или сфера... ...читать

    23 января 2025
    статья

    Акустические компоненты Hitpoint – широкий выбор решений для различных проектов

    Константин Кузьминов (г. Заполярный) Компания Hitpoint, специализирующаяся на производстве акустических компонентов, предлагает широкий выбор пьезодиафрагм, пьезоэлектрических и электромагнитных звукоизлучателей, а также динамиков и микрофонов.... ...читать

    03 октября 2024
    статья

    Электролитические конденсаторы Su’scon, Capxon и Aishi для надежных обратноходовых (Flyback) преобразователей напряжения

    Константин Кузьминов (г. Заполярный) Обратноходовые преобразователи, применяемые в различных областях электроники – от бытовой техники до медицинского оборудования – требуют тщательного внимания к подбору каждого компонента, в том числе входных и... ...читать