Серия AC-DC сетевых преобразователей RID-125

Общие характеристики

	Раздел	AC-DC сетевые преобразователи
	Тип стабилизации
	Вход
	Конструктивное исполнение
	Возможности
	Типы защиты	КЗ, перегрузка, перенапряжение
	Количество выходов
	Тип управления выходом
	Исполнение
	Входное напряжение AC
	Входное напряжение DC
	Напряжение изоляции вход-выход
	Напряжение изоляции вход-земля
	Напряжение изоляции выход-земля
	Применение
	Размер	199×98×38 мм

Документация на серию RID-125

RID-125 125W Dual Output Switching Power Supply series User’s Manual ■ Features : Isolated output & GND for CH1,CH2 AC input range selectable by switch Withstand 300VAC surge input for 5 seconds Protections: Short circuit / Overload / Over voltage All using 105℃ long life electrolytic capacitors Withstand 5G vibration test LED indicator for power on 100% full load burn-in test High realibility 3 years warranty Bauar t gepruft Sicherheit egel ma ge od o s be wac g SPECIFICATION www. tuv.com ID 2000000000 UL62368-1 OUTPUT CH2 CH1 CH2 CH1 CH2 DC VOLTAGE 12V 24V 12V 48V 24V 48V RATED CURRENT 3.7A 3.7A 2.3A 2.3A 2A 2A 0 ~ 5A 0~ 7A 0 ~ 2.5A 0 ~ 4A 0 ~ 2.5A CURRENT RANGE Note.3 0 ~ 7A RATED POWER Note.6 133.2W RIPPLE & NOISE (max.) Note.2 120mVp-p 138W 200mVp-p 120mVp-p VOLTAGE ADJ. RANGE CH1: 11.4 ~ 13.2V VOLTAGE TOLERANCE Note.3 ±2.0% 144W 240mVp-p 200mVp-p 240mVp-p ±8.0% CH1: 11.4 ~ 13.2V ±2.0% ±8.0% CH1: 22.8 ~ 26.4V ±1.0% LINE REGULATION Note.4 ±0.5% ±1.0% ±0.5% ±1.0% ±0.5% ±6.0% ±1.0% LOAD REGULATION Note.5 ±1.0% ±5.0% ±1.0% ±5.0% ±1.0% ±5.0% 500ms, 20ms/230VAC 1200ms, 30ms/115VAC at full load HOLD UP TIME (Typ.) 36ms/230VAC VOLTAGE RANGE 88 ~ 132VAC / 176 ~ 264VAC selected by switch FREQUENCY RANGE 47 ~ 63Hz 30ms/115VAC at full load EFFICIENCY(Typ.) 85% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 3A/115VAC 2A/230VAC COLD START 50A/230VAC OVERLOAD PROTECTION OVER VOLTAGE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC (Note 7) EMC EMISSION EMC IMMUNITY MTBF DIMENSION PACKING NOTE RID-125-2448 CH1 LEAKAGE CURRENT OTHERS TPTC004 OUTPUT NUMBER SETUP, RISE TIME INPUT RID-125-1248 RID-125-1224 MODEL BS EN/EN62368-1 IEC62368-1 248 ~ 373VDC(300VAC peak 5sec. No damage) 85% 86% <2mA / 240VAC 110 ~ 150% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed CH1: 13.8 ~ 16.2V CH1: 13.8 ~ 16.2V CH1: 27.6 ~ 32.4V Protection type : Hiccup mode, recovers automatically after fault condition is removed -20 ~ +70℃ (Refer to "Derating Curve") 20 ~ 90% RH non-condensing -40 ~ +85℃, 10 ~ 95% RH ±0.03%/℃ (0 ~ 50℃)on CH1 output 10 ~ 500Hz, 5G 10min./1cycle, period for 60min. each along X, Y, Z axes UL62368-1, TUV BS EN/EN62368-1, EAC TP TC 004 approved I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH Compliance to BS EN/EN55032 (CISPR32) Class B, BS EN/EN61000-3-2,-3, EAC TP TC 020 Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN61000-6-2 (BS EN/EN50082-2), heavy industry level, criteria A, EAC TP TC 020 218.2Khrs min. MIL-HDBK-217F (25℃) 199*98*38mm (L*W*H) 0.7Kg; 20pcs/15Kg/0.85CUFT 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation.(In order to meet tolerance, it is recommended that CH1 load > 5% rated current.) 4. Line regulation is measured from low line to high line at rated load. 5. Load regulation is measured from 20% to 100% rated load, and other output at 60% rated load. 6. Each output can work within current range. But total output power can't exceed rated output power. 7. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on a 360mm*360mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies. (as available on http://www.meanwell.com) 8. Length of set up time is measured at cold first start. Turning ON/OFF the power supply very quickly may lead to increase of the set up time. 9. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft). ※ Product Liability Disclaimer：For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx File Name:RID-125-SPEC 2021-09-15

Документация на RID-125-2448

RID-125-20210915.cdr

Дата модификации: 28.09.2021

Размер: 125.3 Кб

3 стр.

Документация на серию RID-125

RID-125.cdr

Дата модификации: 09.01.2008

Размер: 1.99 Мб

3 стр.

найти RID-125.pdf

Товары серии RID-125

Наименование	i	Упаковка	P вых	Выход	U1	I1	Коэф. мощн.	КПД	Шум	T раб
RID-125-1205 (MW)		1 шт
RID-125-1224 (MW)		1 шт
RID-125-1248 (MW)		1 шт
RID-125-2405 (MW)		1 шт
RID-125-2412 (MW)
RID-125-2448 (MW)		1 шт
RID-125-4812 (MW)
RID-125-4824 (MW)