Серия AC-DC сетевых преобразователей RPT-65

MEAN WELL

Общие характеристики

 Раздел AC-DC сетевые преобразователи
Серия
Тип стабилизации
Вход
Типы защиты КЗ, перегрузка, перенапряжение
Количество выходов
Исполнение
Входное напряжение AC
Напряжение изоляции вход-выход
Применение
Рабочая температура

Документация на серию RPT-65

R P T- 6 5 65W Triple Output Switching Power Supply ■ Features : Universal AC input/Full range 12V or 24V high peak output current capability Optional L-Bracket and cover (RPT-65x-C, x=E,F,G) Low leakage current<1mA Protections: Short circuit / Overload / Over voltage 65W free air convection, 80W with 18CFM forced air 100% full load burn-in test Fixed switching frequency at 65KHz 2 years warranty series User’s Manual Bauar t gepruft Sicherheit egel ma ge od o s be wac g www. tuv.com ID 2000000000 SPECIFICATION UL62368-1 MODEL RPT-65E RPT-65F CH1 CH2 CH3 CH1 CH2 CH3 CH1 CH2 CH3 DC VOLTAGE 12V 5V -5V 12V 5V -12V 24V 5V 12V RATED CURRENT 4.5A 1.2A 0.5A 4.5A 1.2A 0.5A 2.25A 1.2A 0.5A CURRENT RANGE 0.18 ~ 5.8A 0 ~ 1.5A 0 ~ 0.7A 0.18 ~ 5.8A 0 ~ 1.5A 0 ~ 0.7A 0.09 ~ 2.9A 0 ~ 1.5A 0 ~ 0.7A Rated load Rated load 7.5A Rated load Rated load 3.75A Rated load Rated load 50mVp-p 100mVp-p Note.4 7.5A RATED POWER 62.5W OUTPUT POWER (max.) Rated output power for convection; 80W with 18CFM min. forced air RIPPLE & NOISE (max.) Note.2 120mVp-p 66W 100mVp-p CH1:11.4 ~ 12.8V ±5.0% VOLTAGE TOLERANCE Note.3 ±2.0% 150mVp-p 150mVp-p 150mVp-p ±5.0% ±5.0% ±5.0% CH1:22.8 ~ 26.4V ±2.0% ±5.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% LOAD REGULATION ±2.0% ±5.0% ±5.0% ±2.0% ±5.0% ±5.0% ±2.0% ±5.0% ±5.0% SETUP, RISE TIME 800ms, 20ms at full load HOLD UP TIME (Typ.) 20ms at full load VOLTAGE RANGE 90 ~ 264VAC FREQUENCY RANGE 47 ~ 440Hz EFFICIENCY (Typ.) 77% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 1.5A/115VAC LEAKAGE CURRENT OVERLOAD PROTECTION OVER VOLTAGE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC (Note 5) EMC EMISSION EMC IMMUNITY MTBF DIMENSION PACKING NOTE 100mVp-p CH1:11.4 ~ 12.8V ±2.0% ±5.0% LINE REGULATION OTHERS 66W 120mVp-p VOLTAGE ADJ. RANGE INPUT RPT-65G OUTPUT NUMBER PEAK LOAD OUTPUT BS EN/EN62368-1 TPTC004 IEC62368-1 127 ~370VDC 77% 81% 0.9A/230VAC COLD START 25A/115VAC <1mA 50A/230VAC 90 ~ 125W output power Protection type : Hiccup mode, recovers automatically after fault condition is removed. CH1:13.8 ~ 16.2V CH1:27.6 ~ 32.4V CH1:13.8 ~ 16.2V Protection type : Hiccup mode, recovers automatically after fault condition is removed. -20 ~ +60℃ (Refer to "Derating Curve") 20 ~ 90% RH non-condensing -40 ~ +85℃, 10 ~ 95% RH ±0.04%/℃ (0 ~ 50℃) on CH1 output 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes UL62368-1, TUV BS EN/EN62368-1, EAC TP TC 004 approved I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH Compliance to BS EN/EN55032 (CISPR32) Class B, BS EN/EN61000-3-2,-3, EAC TP TC 020 Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN55024, light industry level, criteria A, EAC TP TC 020 288.1K hrs min. MIL-HDBK-217F (25℃) PCB:127*76*29mm (L*W*H) ; with optional CASE:130*85*37mm (L*W*H) PCB:0.24Kg; 63pcs/16Kg/1.28CUFT ; with optional CASE:0.47Kg;32pcs/16Kg/0.73CUFT 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. 10% duty cycle maximum within every second. Average output power should not exceed the rated power, output voltage above 90% DC voltage. 5. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on a 360mm*360mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on http://www.meanwell.com) 6. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft). ※ Product Liability Disclaimer：For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx File Name:RPT-65-SPEC 2021-09-15 PDF
Документация на RPT-65G 

RPT-65-20210915.cdr

Дата модификации: 26.11.2021

Размер: 136.4 Кб

3 стр.

R P T- 6 5 65W Triple Output Switching Power Supply series Features : Universal AC input/Full range 12V or 24V high peak output current capability Optional L-Bracket and cover Low leakage current<1mA Protections:Short circuit/Over load/Over voltage 65W free air convection, 80W with 18CFM forced air 100% full load burn-in test Fixed switching frequency at 65KHz 2 years warranty SPECIFICATION MODEL CH2 CH3 CH1 CH2 CH3 CH1 CH2 CH3 DC VOLTAGE 12V 5V -5V 12V 5V -12V 24V 5V 12V RATED CURRENT 4.5A 1.2A 0.5A 4.5A 1.2A 0.5A 2.25A 1.2A 0.5A CURRENT RANGE 0.18 ~ 5.8A 0 ~ 1.5A 0 ~ 0.7A 0.18 ~ 5.8A 0 ~ 1.5A 0 ~ 0.7A 0.09 ~ 2.9A 0 ~ 1.5A 0 ~ 0.7A Rated load Rated load 7.5A Rated load Rated load 3.75A Rated load Rated load 50mVp-p 100mVp-p Note.4 7.5A RATED POWER 62.5W OUTPUT POWER (max.) Rated output power for convection; 80W with 18CFM min. forced air 66W RIPPLE & NOISE (max.) Note.2 120mVp-p 100mVp-p 120mVp-p VOLTAGE ADJ. RANGE CH1:11.4 ~ 12.8V VOLTAGE TOLERANCE Note.3 2.0% 5.0% INPUT RPT-65G CH1 PEAK LOAD OUTPUT RPT-65F RPT-65E OUTPUT NUMBER 5.0% 150mVp-p 66W 100mVp-p 150mVp-p CH1:11.4 ~ 12.8V 2.0% 5.0% 5.0% 150mVp-p CH1:22.8 ~ 26.4V 2.0% 5.0% 5.0% LINE REGULATION 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% LOAD REGULATION 2.0% 5.0% 5.0% 2.0% 5.0% 5.0% 2.0% 5.0% 5.0% SETUP, RISE TIME 800ms, 20ms at full load HOLD TIME (Typ.) 20ms at full load VOLTAGE RANGE 90 ~ 264VAC FREQUENCY RANGE 47 ~ 440Hz EFFICIENCY (Typ.) 77% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 1.5A/115VAC LEAKAGE CURRENT OVER LOAD PROTECTION OVER VOLTAGE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE 127 ~370VDC 77% 81% 0.9A/230VAC COLD START 25A/115VAC <1mA 50A/230VAC 90 ~ 125W output power Protection type : Hiccup mode, recovers automatically after fault condition is removed. CH1:13.8 ~ 16.2V CH1:27.6 ~ 32.4V CH1:13.8 ~ 16.2V Protection type : Hiccup mode, recovers automatically after fault condition is removed. -20 ~ +60 (Refer to output load derating curve) 20 ~ 90% RH non-condensing -40 ~ +85 , 10 ~ 95% RH 0.04%/ (0 ~ 50 ) on CH1 output 10 ~ 500Hz, 2G 10min./1cycle, Period for 60min.each along X, Y, Z axes UL60950-1, TUV EN60950-1 Approved I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC SAFETY & ISOLATION RESISTANCE EMC (Note 4) OTHERS I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B HARMONIC CURRENT Compliance to EN61000-3-2,-3 EMS IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, Light industry level, criteria A MTBF 288.1K hrs min. MIL-HDBK-217F (25 ) PCB:127*76*28mm (L*W*H) with optional CASE:130*84.4*37mm (L*W*H) 0.24Kg; 63pcs/16Kg/1.35CUFT DIMENSION PACKING NOTE 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. 10% duty cycle maximum within every second. Average output power should not exceed the rated power, output voltage above 90% DC voltage. 5. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. File Name:RPT-65-SPEC 2006-01-27 PDF
Документация на серию RPT-65 

RPT-65.cdr

Дата модификации: 07.02.2006

Размер: 346.1 Кб

2 стр.

    Товары серии RPT-65

    Наименование i Упаковка P вых Выход U1 I1 Конструктив Возможности Управление U вх DC Коэф. мощн. U изол вх-земля U изол вых-земля КПД Шум Размер
    RPT-65E (MW)
     
    		компактный дизайн, базовая модель 127×76×28 мм
    RPT-65E-C (MW)
     
    		130×85×37 мм
    RPT-65F (MW)
     
    		AC-DC сетевой преобразователь - P вых: 65 Вт; Выход: 12 В, 5 В, -12 В; U1: 12 В; I1: 0.... 1 шт компактный дизайн, базовая модель 127×76×28 мм
    RPT-65F-C (MW)
     
    		— — — — — — — — —
    RPT-65G (MW)
     
    		AC-DC сетевой преобразователь - P вых: 65 Вт; Выход: 24 В, 5 В, 12 В; U1: 24 В; I1: 0.0... компактный дизайн, базовая модель 127×76×28 мм
    RPT-65G-C (MW)
     
    		— — — — — — — — — — — — — —