Серия DC-DC модульных преобразователей SKA15

MEAN WELL

Общие характеристики

 Раздел DC-DC модульные преобразователи
Монтаж
Выходная мощность
Количество каналов
Возможности
Комплекс защит
Размер 50.8×25.4×11.27 мм
Рабочая температура

Документация на серию SKA15

SKA15 9.9~15W DC-DC Regulated Single Output Converter series ■ Features : 2:1 wide input range 4:1 wide input range(option) 1000VDC I/O isolation 3000VDC I/O isolation(option) Built-in EMI filter Protections: Short circuit / Overload Cooling by free air convection Six-sided shield metal case 100% burn-in test Low cost / High reliability Approvals: FCC / EAC / CE / UKCA 2 years warranty SPECIFICATION ORDER NO. DC VOLTAGE SKA15A- SKA15B- SKA15C- SKA15A- SKA15B- SKA15C- SKA15A- SKA15B- SKA15C- SKA15A- SKA15B- SKA15C033 033 033 05 05 05 12 12 12 15 15 15 3.3V 5V 12V 15V CURRENT RANGE 300 ~ 3000mA 300 ~ 3000mA RATED POWER 9.9W 15W RIPPLE & NOISE (max.) Note.2 50mVp-p OUTPUT LINE REGULATION Note.3 ±0.2% LOAD REGULATION Note.4 ±0.5% 50mVp-p 125 ~ 1250mA 100 ~ 1000mA 60mVp-p 60mVp-p ±2.0% VOLTAGE ACCURACY SWITCHING FREQUENCY 150KHz min. EXTERNAL CAPACITANCE LOAD (max.) 2700uF 2700uF VOLTAGE RANGE EFFICIENCY (Typ.) INPUT 2700uF 2700uF DC CURRENT Full load A: 1700mA B: 800mA C: 400mA No load A: 20mA C: 15mA FILTER PROTECTION Pi network Fuse recommended B: 30mA 1000uF 1800uF 1800uF 680uF 1500uF 1500uF 560uF 80% 82% 80% 82% 82% 80% 82% 110% ~ 250% rated output power OVER CURRENT Protection type : Hiccup mode, recovers automatically after fault condition is removed All output equipped with short circuit PROTECTION (Note. 5) 1000uF A: 9 ~ 18VDC B: 18 ~ 36VDC C: 36 ~ 72VDC 76% 78% 76% 76% 78% SHORT CIRCUIT Protection type : Hiccup mode, recovers automatically after fault condition is removed -40 ~ +71℃ (Refer to "Derating Curve") WORKING TEMP. WORKING HUMIDITY 20% ~ 90% RH non-condensing ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +105℃, 10 ~ 95% RH ±0.03% / ℃ (0 ~ 50℃) TEMP. COEFFICIENT 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes VIBRATION EAC TP TC 020/2011approved SAFETY STANDARDS WITHSTAND VOLTAGE SAFETY & ISOLATION RESISTANCE EMC EMC EMISSION EMC IMMUNITY OTHERS I/P-O/P:1KVDC I/P-O/P: 100M Ohms / 500VDC / 25℃/ 70% RH Compliance to BS EN/EN55032 Class A, FCC part 15 Class A , EAC TP TC 020 Compliance to BS EN/EN61000-4-2,3,4,5,6,8, light industry level, criteria A , EAC TP TC 020 MTBF DIMENSION 300Khrs min. MIL-HDBK-217F(25℃) WEIGHT 32g 50.8*25.4*11.27 mm or 2"*1"*0.44" inch (L*W*H) Derating Curve Pin Configuration Mechanical Specification Unit:mm(inch) 11.27 1 3 4 2 BOTTOM VIEW 5 1.0ψ + 0.2/-0.1 10.2 10.2 2.5 15.2 2.5 25.4 10.2 5.1 10.1 20.3 Pin No. Output 1 2 3 4 5 +Vin -Vin + Vo u t No Pin - Vo u t 100 LOAD (%) 50.8 15.3 80 5.8 -40 0 25 Tolerance .X or .XX= ±0.5mm NOTE 50 60 71 100 Ta (℃) 1.All parameters are specified at normal input, rated load, 25℃ 70% RH ambient. 2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor. 3.Line regulation is measured from low line to high line at rated load. 4.Load regulation is measured from 10% to 100% rated load. 5.Please prevent the converter from operating in overload or short circuit condition for more than 30 seconds. ※ Product Liability Disclaimer：For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx File Name:SKA15-SPEC 2021-12-01 PDF
Документация на SKA15A-05 PBF 

SKA15.cdr

Дата модификации: 24.11.2021

Размер: 65.1 Кб

1 стр.

SKA15 9.9~15W DC-DC Regulated Single Output Converter series Features : 2:1 wide input range 1000VDC I/O isolation 3000VDC I/O isolation Input Pi network filter Protections: Short circuit/ Over load Free air convection Six-sided shield metal case High reliability/ Low cost 100% burn-in test 1 year warranty SPECIFICATION ORDER NO. OUTPUT DC VOLTAGE SKA15A- SKA15B- SKA15C- SKA15A- SKA15B- SKA15C- SKA15A- SKA15B- SKA15C- SKA15A- SKA15B- SKA15C12 033 033 033 05 05 05 12 12 15 15 15 3.3V 5V 12V 15V CURRENT RANGE 300 ~ 3000mA 300 ~ 3000mA RATED POWER 9.9W 15W RIPPLE & NOISE (max.) Note.2 50mVp-p LINE REGULATION Note.3 0.2% LOAD REGULATION Note.4 0.5% 60mVp-p 60mVp-p 150KHz min. SWITCHING FREQUENCY VOLTAGE RANGE A: 9 ~ 18VDC B: 18 ~ 36VDC C: 36 ~ 72VDC 76% 76% 78% 76% 78% EFFICIENCY (Typ.) DC CURRENT Full load A: 1700mA B: 800mA C: 400mA No load A: 20mA C: 15mA B: 30mA 80% 82% 82% 80% 82% 80% 82% Pi network FILTER 110% ~ 200% rated output power OVER CURRENT Protection type : Hiccup mode, recovers automatically after fault condition is removed All output equipped with short circuit PROTECTION (Note. 5) 100 ~ 1000mA 2.0% VOLTAGE ACCURACY INPUT 50mVp-p 125 ~ 1250mA SHORT CIRCUIT Protection type : Hiccup mode, recovers automatically after fault condition is removed -25 ~ +71 (Refer to output load derating curve) 20% ~ 90% RH non-condensing ENVIRONMENT STORAGE TEMP., HUMIDITY -25 ~ +105 , 10 ~ 95% RH 0.03% / (0 ~ 50 ) TEMP. COEFFICIENT 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes VIBRATION I/P-O/P:1KVDC SAFETY & WITHSTAND VOLTAGE I/P-O/P: 100M Ohms / 500VDC ISOLATION RESISTANCE EMC 300khrs min. MIL-HDBK-217F(25 ) MTBF OTHERS DIMENSION 50.8*25.4*11.27 mm or 2"*1"*0.44" inch (L*W*H) WORKING TEMP. WORKING HUMIDITY 60g WEIGHT Derating Curve Pin Configuration Mechanical Specification Unit:mm(inch) 3 4 2 BOTTOM VIEW 5 1.0 10.2 10.2 1 + 0.2/-0.1 6.3 Pin no. Output Single 1 2 3 4 5 + Vi n - Vi n + Vo u t No Pin - Vo u t 100 LOAD (%) 11.27 15.2 2.5 20.3 2.5 10.2 5.1 10.1 15.3 80 -25 0 25 50 60 71 Ta ( NOTE 100 ) 1.All parameters are specified at normal input, rated load, 25 70% RH. Ambient. 2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor. 3.Line regulation is measured from low line to high line at rated load. 4.Load regulation is measured from 10% to 100% rated load. 5.Please prevent the converter from operating in overload or short circuit condition for more than 30 seconds. File Name:SKA15-SPEC 2006-03-28 PDF
Документация на серию SKA15 

\\Fileserver-s\doc-control\do

Дата модификации: 27.07.2006

Размер: 345.9 Кб

1 стр.

    Товары серии SKA15

    Наименование i Упаковка U вх Выход U вх ном. U1 I1 Шум КПД Uиз. вх-вых
    SKA15A-033 (MW)
     
    		DC-DC модульный преобразователь - Монтаж: на плату, 2x1 inch; P вых: 15 Вт; #: 1; U вх:... в линейках 10 шт
     
    		 — — — — — — — —
    SKA15A-05 (MW)
     
    		в линейках 10 шт
     
    		 — — — — — — — —
    SKA15A-12 (MW)
     
    		в линейках 10 шт
     
    		 — — — — — — — —
    SKA15A-15 (MW)
     
    		DC-DC модульный преобразователь - Монтаж: на плату, 2x1 inch; P вых: 15 Вт; #: 1; U вх:... в линейках 10 шт
     
    		 — — — — — — — —
    SKA15B-033 (MW)
     
    		DC-DC модульный преобразователь - Монтаж: на плату, 2x1 inch; P вых: 15 Вт; #: 1; U вх:... в линейках 10 шт
     
    		 — — — — — — — —
    SKA15B-05 (MW)
     
    		в линейках 10 шт
     
    		 — — — — — — — —
    SKA15B-12 (MW)
     
    		DC-DC модульный преобразователь - Монтаж: на плату, 2x1 inch; P вых: 15 Вт; #: 1; U вх:... в линейках 10 шт
    SKA15B-15 (MW)
     
    		в линейках 10 шт
    SKA15C-033 (MW)
     
    		DC-DC модульный преобразователь - Монтаж: на плату, 2x1 inch; P вых: 15 Вт; #: 1; U вх:... в линейках 10 шт
     
    		 — — — — — — — —
    SKA15C-05 (MW)
     
    		в линейках 10 шт
    SKA15C-12 (MW)
     
    		DC-DC модульный преобразователь - Монтаж: на плату, 2x1 inch; P вых: 15 Вт; #: 1; U вх:... в линейках 10 шт
    SKA15C-15 (MW)
     
    		DC-DC модульный преобразователь - Монтаж: на плату, 2x1 inch; P вых: 15 Вт; #: 1; U вх:... в линейках 10 шт