Серия DC-DC модульных преобразователей SKE15

MEAN WELL

Общие характеристики

 Раздел DC-DC модульные преобразователи
Монтаж
Выходная мощность
Количество каналов
Возможности
Комплекс защит
Размер 50.8×50.8×11 мм
Рабочая температура

Документация на серию SKE15

SKE15 15W DC-DC Regulated Single Output Converter series ■ Features : 2:1 wide input range 4:1 wide input range(option) 1000VDC I/O isolation 3000VDC I/O isolation(option) Built-in EMI filter Protections: Short circuit / Overload Cooling by free air convection Six-sided shield metal case 100% burn-in test Low cost / High reliability Approvals: FCC / EAC / CE / UKCA 2 years warranty SPECIFICATION ORDER NO. DC VOLTAGE SKE15A- SKE15B- SKE15C- SKE15A- SKE15B- SKE15C- SKE15A- SKE15B- SKE15C- SKE15A- SKE15B- SKE15C05 05 05 12 12 12 15 15 15 24 24 24 5V 12V 15V 24V CURRENT RANGE 300 ~ 3000mA RATED POWER 15W RIPPLE & NOISE (max.) Note.2 50mVp-p OUTPUT LINE REGULATION Note.3 ±0.3% LOAD REGULATION Note.4 ±0.5% VOLTAGE ACCURACY ±2.0% SWITCHING FREQUENCY VOLTAGE RANGE 150KHz min. EFFICIENCY (Typ.) INPUT 100 ~ 1000mA 62.5 ~ 625mA 60mVp-p 60mVp-p 80mVp-p A: 9 ~ 18VDC B: 18 ~ 36VDC C: 36 ~ 72VDC 79% 80% 79% 80% 82% DC CURRENT Full load A: 1700mA B: 800mA C: 400mA No load A: 40mA C: 10mA FILTER PROTECTION Pi network Fuse recommended B: 20mA 82% 80% 82% 83% 83% 83% 84% 160% ~ 250% rated output power OVER CURRENT Protection type : Hiccup mode, recovers automatically after fault condition is removed All output equipped with short circuit PROTECTION (Note. 5) 125 ~ 1250mA SHORT CIRCUIT Protection type : Hiccup mode, recovers automatically after fault condition is removed WORKING TEMP. WORKING HUMIDITY -25 ~ +71℃ (Refer to "Derating Curve") VIBRATION SAFETY STANDARDS 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes EAC TP TC 020/2011 approved 20% ~ 90% RH non-condensing ENVIRONMENT STORAGE TEMP., HUMIDITY -25 ~ +105℃, 10 ~ 95% RH ±0.03% / ℃ (0 ~ 50℃) TEMP. COEFFICIENT WITHSTAND VOLTAGE SAFETY & ISOLATION RESISTANCE EMC EMC EMISSION EMC IMMUNITY OTHERS I/P-O/P:1KVDC I/P-O/P: 100M Ohms / 500VDC / 25℃/ 70% RH Compliance to BS EN/EN55032 Class A, FCC part 15 Class A , EAC TP TC 020 Compliance to BS EN/EN61000-4-2,3,4,5,6,8, light industry level, criteria A , EAC TP TC 020 MTBF DIMENSION 300Khrs min. MIL-HDBK-217F(25℃) WEIGHT 65g 50.8*50.8*11.0 mm or 2"*2"*0.43" inch (L*W*H) Derating Curve Pin Configuration Mechanical Specification Unit:mm(inch) 5.8 (0.23) 11 (0.43) 3 1 2 4 5 10.20 10.20 (.402) (.402) 15.2 (.598) 22.8 (.898) 5.10 (.200) 50.8 (.200) 20.30 (.800) 15.2 (.598) Pin No. Output 1 2 3 4 5 +Vin -Vin + Vo u t No Pin - Vo u t 100 LOAD (%) 50.8 (2.00) 80 BOTTOM VIEW 1.0ψ + 0.2/-0.1 -25 0 25 50 60 71 100 Ta (℃) NOTE 1.All parameters are specified at normal input, rated load, 25℃ 70% RH ambient. 2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor. 3.Line regulation is measured from low line to high line at rated load. 4.Load regulation is measured from 10% to 100% rated load. 5.Please prevent the converter from operating in overload or short circuit condition for more than 30 seconds. ※ Product Liability Disclaimer：For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx File Name:SKE15-SPEC 2021-12-01 PDF
Документация на SKE15A-05 

SKE15.cdr

Дата модификации: 24.11.2021

Размер: 63.5 Кб

1 стр.

SKE15 15W DC-DC Regulated Single Output Converter series Features : 2:1 wide input range 4:1 wide input range ( optional ) 1000VDC I/O isolation Input Pi network filter Protections: Short circuit/ Over load Free air convection Six-sided shield metal case High reliability/ Low cost 100% burn-in test 1 year warranty SPECIFICATION ORDER NO. SKE15A- SKE15B- SKE15C- SKE15A- SKE15B- SKE15C- SKE15A- SKE15B- SKE15C- SKE15A- SKE15B- SKE15C12 05 05 05 12 12 15 15 15 24 24 24 5V 12V 15V 24V DC VOLTAGE 300 ~ 3000mA CURRENT RANGE 125 ~ 1250mA OUTPUT 50mVp-p RIPPLE & NOISE (max.) Note.2 Note.3 0.3% LOAD REGULATION Note.4 0.5% 60mVp-p 80mVp-p 2% 150KHz min. SWITCHING FREQUENCY VOLTAGE RANGE A: 9 ~ 18VDC EFFICIENCY (Typ.) 79% 79% Full load A: 1700mA B: 800mA C: 400mA No load A: 40mA C: 10mA DC CURRENT FILTER B: 18~36VDC 80% C: 36~72VDC 80% B: 20mA 82% 82% 80% 83% 83% 82% 83% 84% Pi network 160%~250% rated output power OVER CURRENT Protection type : Hiccup mode, recovers automatically after fault condition is removed PROTECTION (Note. 5) 62.5 ~ 625mA 60mVp-p LINE REGULATION VOLTAGE ACCURACY INPUT 100 ~ 1000mA 15W RATED POWER All output equipped with short circuit Protection type : Hiccup mode, recovers automatically after fault condition is removed SHORT CIRCUIT -25~+71 (Refer to output load derating curve) 20%~90% RH non-condensing ENVIRONMENT STORAGE TEMP., HUMIDITY -25~+105 , 10~95% RH 0.03% / (0~50 ) TEMP. COEFFICIENT WORKING TEMP. WORKING HUMIDITY VIBRATION SAFETY & WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC MTBF OTHERS DIMENSION 10~500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes I/P-O/P:1KVDC I/P-O/P: 100M Ohms / 500VDC 300khrs min. MIL-HDBK-217F(25 ) 50.8*50.8*11.0 mm or 2"*2"*0.43" inch (L*W*H) 65g WEIGHT Derating Curve Pin Configuration Mechanical Specification Unit:mm(inch) 5.6MIN (.22) 4 5 BOTTOM VIEW 1.0 NOTE 10.20 10.20 (.402) (.402)15.2 (.598) 22.8 (.898) 5.10 (.200) 50.8 (.200) 3 1 2 Pin no. Output Single 1 2 3 4 5 + Vi n - Vi n + Vo u t No Pin - Vo u t 11 (0.43) 100 LOAD (%) 50.8 (2.00) 20.30 (.800) 15.2 (.598) 80 -25 0 + 0.2/-0.1 25 50 60 71 Ta ( 100 ) 1.All parameters are specified at normal input, rated load, 25 70% RH. Ambient. 2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor. 3.Line regulation is measured from low line to high line at rated load. 4.Load regulation is measured from 10% to 100% rated load. 5.Please prevent the converter from operating in overload or short circuit condition for more than 30 seconds. File Name:SKE15-SPEC 2004-01-09 PDF
Документация на серию SKE15 

SKE15.cdr

Дата модификации: 12.02.2004

Размер: 226.5 Кб

1 стр.

    Товары серии SKE15

    Наименование i Упаковка U вх Выход U вх ном. U1 I1 Шум КПД Uиз. вх-вых
    SKE15A-05 (MW)
     
    		DC-DC модульный преобразователь - Монтаж: на плату, 2x2 inch; P вых: 15 Вт; #: 1; U вх:... в линейках 5 шт
    SKE15A-12 (MW)
     
    		DC-DC модульный преобразователь - Монтаж: на плату, 2x2 inch; P вых: 15 Вт; #: 1; U вх:... в линейках 5 шт
    SKE15A-15 (MW)
     
    		DC-DC модульный преобразователь - Монтаж: на плату, 2x2 inch; P вых: 15 Вт; #: 1; U вх:...
    SKE15A-24 (MW)
     
    		в линейках 5 шт
    SKE15B-05 (MW)
     
    		DC-DC модульный преобразователь - Монтаж: на плату, 2x2 inch; P вых: 15 Вт; #: 1; U вх:... в линейках 5 шт
    SKE15B-12 (MW)
     
    		DC-DC модульный преобразователь - Монтаж: на плату, 2x2 inch; P вых: 15 Вт; #: 1; U вх:... в линейках 5 шт
    SKE15B-15 (MW)
     
    		DC-DC модульный преобразователь - Монтаж: на плату, 2x2 inch; P вых: 15 Вт; #: 1; U вх:...
    SKE15B-24 (MW)
     
    		в линейках 5 шт
    SKE15C-05 (MW)
     
    		DC-DC модульный преобразователь - Монтаж: на плату, 2x2 inch; P вых: 15 Вт; #: 1; U вх:... 10 шт
    SKE15C-12 (MW)
     
    		в линейках 5 шт
    SKE15C-15 (MW)
     
    		DC-DC модульный преобразователь - Монтаж: на плату, 2x2 inch; P вых: 15 Вт; #: 1; U вх:... в линейках 5 шт
    SKE15C-24 (MW)
     
    		DC-DC модульный преобразователь - Монтаж: на плату, 2x2 inch; P вых: 15 Вт; #: 1; U вх:... в линейках 5 шт