Серия DC-DC модульных преобразователей SMA01

MEAN WELL

Общие характеристики

 Раздел DC-DC модульные преобразователи
Монтаж
Выходная мощность
Количество каналов
Возможности
Напряжение изоляции вход-выход
Размер 12.7×10.16×7.1 мм
Рабочая температура

Документация на серию SMA01

SMA01 1W DC-DC Unregulated Single Output Converter series ■ Features : 1500VDC I/O isolation 3000VDC I/O isolation(optional) Operating temperature range of -40 ~ +85℃ without derating Internal SMD technology Built-in EMI filter Cooling by free air convection Non-conductive plastic case Dual in line package Industry standard pinout 100% burn-in test Low cost / High reliability 2 years warranty SELECTION GUIDE ORDER NO. SMA01L-05 SMA01N-05 SMA01M-05 DC OUTPUT VOLTAGE 5V OUTPUT CURRENT RANGE 0 ~ 200mA EFFICIENCY(Typ.) 77% 79% 77% SMA01L-12 SMA01M-12 SMA01N-12 ORDER NO. SMA01L-09 SMA01M-09 SMA01N-09 77% 78% 75% SMA01L-15 SMA01M-15 SMA01N-15 9V DC OUTPUT VOLTAGE 12V OUTPUT CURRENT RANGE 0 ~ 84mA EFFICIENCY(Typ.) 78% 0 ~ 110mA 15V 0 ~ 67mA 78% 79% 79% 77% 10.8 ~ 13.2V 12V 21.6 ~ 26.4V 24V 4.5 ~ 5.5V 5V 10.8 ~ 13.2V 12V 21.6 ~ 26.4V 24V Full load 265mA No load 32mA 110mA 57mA 265mA 110mA 57mA 15mA 11mA 32mA 15mA 11mA PROTECTION (FUSE RECOMMENDED) 500mA 250mA 150mA 500mA 250mA 150mA 80% SPECIFICATION OUTPUT RATED POWER 1W RIPPLE & NOISE (max.) Note.2 100mVp-p LINE REGULATION Note.3 ±1.2% for 1% input variation LOAD REGULATION Note.4 ±8.0% VOLTAGE ACCURACY ±2.0% SWITCHING FREQUENCY(Typ.) 100KHz VOLTAGE RANGE NORMAL VOLTAGE 4.5 ~ 5.5V 5V INPUT CURRENT FILTER Capacitor type Momentary OVERLOAD Protection type : Broken Momentary PROTECTION SHORT CIRCUIT Protection type : Broken WORKING TEMP. -40 ~ +90℃ (Refer to "Derating Curve") WORKING HUMIDITY 20% ~ 90% RH non-condensing -55 ~ +125℃, 10 ~ 95% RH ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE ±0.05% / ℃ (0 ~ 50℃) 10 ~ 500Hz, 2G 10min./1 cycle, period for 60min. each along X, Y, Z axes EAC TP TC 004 approved I/P-O/P:1.5KVDC I/P-O/P: 100M Ohms / 500VDC / 25℃/ 70% RH SAFETY & ISOLATION RESISTANCE ISOLATION CAPACITANCE EMC 80pF max. EMI RADIATION OTHERS Compliance to EN55032 Class B, FCC part 15 Class B, EAC TP TC 020 Compliance to EN61000-4-2,3,4,5,6,8 light industry level, criteria A, EAC TP TC 020 EMS IMMUNITY MTBF DIMENSION (L*W*H) 12.7*10.16*7.1mm or 0.50"*0.40"*0.28" inch for 5V,12V input ; 12.7*10.16*7.62mm or 0.50"*0.40"*0.30" inch for 24V input WEIGHT 1.7g 700khrs min. MIL-HDBK-217F(25℃) Mechanical Specification Unit: mm (inch) 12.7 (0.50) 7.62 (0.30) SIDE VIEW 10.16 (0.40) 7.1 (0.28) 7.62 (0.30) 1 BOTTON VIEW 7 4 5 0.25 (0.01) Derating Curve Pin Configuration Pin No. Output 1 -Vin 4 5 +Vin +Vout 7 -Vout 100 LOAD (%) INPUT 50 5.08 (0.2) 3.81 (0.15) 0.5 (0.02) -40 NOTE 0 20 40 60 85 90 100 Ta (℃) 1.All parameters are specified at normal input, rated load, 25℃ 70% RH ambient. 2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor. 3.Line regulation is measured from low line to high line at rated load. 4.Load regulation is measured from 20% to 100% rated load. File Name: SMA01-SPEC 2018-01-15 PDF
Документация на серию SMA01 

SMA01.cdr

Дата модификации: 01.08.2018

Размер: 48.7 Кб

1 стр.

    Товары серии SMA01

    Наименование i Упаковка U вх Выход U вх ном. U1 I1 КПД
    SMA01L-05 (MW)
     
    SMA01L-09 (MW)
     
    SMA01L-12 (MW)
     
    SMA01L-15 (MW)
     
    SMA01M-05 (MW)
     
    SMA01M-09 (MW)
     
    SMA01M-12 (MW)
     
    SMA01M-15 (MW)
     
    SMA01N-05 (MW)
     
    SMA01N-09 (MW)
     
    SMA01N-12 (MW)
     
    SMA01N-15 (MW)