Серия DC-DC модульных преобразователей SPA01

MEAN WELL

Общие характеристики

 Раздел DC-DC модульные преобразователи
Монтаж
Выходная мощность
Количество каналов
Возможности
Комплекс защит
Напряжение изоляции вход-выход
Размер 17.4×7.75×11.1 мм
Рабочая температура

Документация на серию SPA01

S PA 0 1 1W DC-DC Regulated Single Output Converter series ■ Features : Single in line package 2:1 wide input range 1500VDC I/O isolation Built-in EMI filter without external components Protections: Short circuit / Overload Cooling by free air convection 100% full load burn-in test Low cost / High reliability 2 years warranty SPECIFICATION ORDER NO. SPA01A-05 SPA01B-05 SPA01C-05 CURRENT RANGE 20 ~ 200mA 8 ~ 83mA 6 ~ 67mA RATED POWER 1W 80mVp-p 80mVp-p ±2.0% SWITCHING FREQUENCY VOLTAGE RANGE 100KHz min. A: 9 ~ 18VDC EFFICIENCY (Typ.) 77% B: 18 ~ 36VDC 77% SPA01C-15 79% 79% C: 27mA No load A: 20mA C: 7mA B: 10mA C: 36 ~ 75VDC 77% Full load A: 110mA B: 55mA 78% 78% 78% 79% Capacitor Type PROTECTION Fuse recommended OVERLOAD 130 ~ 200% rated output power Protection type : Recovers automatically after fault condition is removed All output equipped with short circuit SHORT CIRCUIT Protection type : Recovers automatically after fault condition is removed WORKING TEMP. ENVIRONMENT SPA01B-15 Note.4 ±0.5% VOLTAGE ACCURACY FILTER (Note. 5) SPA01A-15 15V DC CURRENT PROTECTION SPA01C-12 12V LOAD REGULATION INPUT SPA01B-12 5V RIPPLE & NOISE (max.) Note.2 60mVp-p LINE REGULATION Note.3 ±0.5% OUTPUT SPA01A-12 DC VOLTAGE -40 ~ +90℃ (Refer to "Derating Curve") WORKING HUMIDITY 20% ~ 90% RH non-condensing STORAGE TEMP., HUMIDITY -40 ~ +105℃, 10 ~ 95% RH ±0.05% / ℃ (0 ~ 50℃) TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS 10 ~ 500Hz, 2G 10min./1 cycle, period for 60min. each along X, Y, Z axes WITHSTAND VOLTAGE I/P-O/P:1.5KVDC SAFETY ISOLATION RESISTANCE ISOLATION CAPACITANCE I/P-O/P: 100M Ohms / 500VDC / 25℃/ 70% RH 80pF max. Compliance to BS EN/EN55032 Class B, FCC part 15 Class B , EAC TP TC 020 Compliance to BS EN/EN61000-4-2,3,4,5,6,8 light industry level, criteria A , EAC TP TC 020 OTHERS EMC EMISSION EMC IMMUNITY MTBF DIMENSION 500Khrs min. MIL-HDBK-217F(25℃) 17.4*7.75*11.1mm or 0.69"*0.30"*0.44" inch (L*W*H) WEIGHT 3g EAC TP TC 020/2011 (EAC TP TC 004 for 48Vin type only) approved Unit:mm(inch) 2.54(0.1) 1 2 4 0.5 (0.02) 6 3.81±0.5(0.15) 5.08 5.08 (0.2) (0.2) BOTTOM VIEW 2.4(0.09) 7.75(0.3) 12.7(0.5) Pin No. Output 1 2 4 6 - Vi n + Vi n + Vo u t - Vo u t 100 LOAD (%) FRONT VIEW 11.1(0.44) 17.4(0.69) 0.55±0.05(0.02) Derating Curve Pin Configuration Mechanical Specification 60 -40 0 25 50 85 90 100 2.35(0.09) Ta (℃) NOTE 1.All parameters are specified at normal input, rated load, 25℃ 70% RH ambient. 2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor. 3.Line regulation is measured from low line to high line at rated load. 4.Load regulation is measured from 10% to 100% rated load. 5.Please prevent the converter from operating in overload or short circuit condition for more than 30 seconds. ※ Product Liability Disclaimer：For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx File Name:SPA01-SPEC 2021-12-01 PDF
Документация на SPA01C-15 

SPA01.cdr

Дата модификации: 24.11.2021

Размер: 55.1 Кб

1 стр.

S PA 0 1 1W DC-DC Regulated Single Output Converter series ■ Features : Single in line package 2:1 wide input range 1500VDC I/O isolation Built-in EMI filter without external components Protections: Short circuit / Overload Cooling by free air convection 100% full load burn-in test Low cost / High reliability 2 years warranty SPECIFICATION ORDER NO. SPA01A-05 SPA01B-05 SPA01C-05 CURRENT RANGE 20 ~ 200mA 8 ~ 83mA 6 ~ 67mA RATED POWER 1W 80mVp-p 80mVp-p ±2.0% SWITCHING FREQUENCY VOLTAGE RANGE 100KHz min. A: 9 ~ 18VDC EFFICIENCY (Typ.) 77% B: 18 ~ 36VDC 77% SPA01C-15 79% 79% C: 27mA No load A: 20mA C: 7mA B: 10mA C: 36 ~ 75VDC 77% Full load A: 110mA B: 55mA 78% 78% 78% 79% Capacitor Type PROTECTION Fuse recommended OVERLOAD 130 ~ 200% rated output power Protection type : Recovers automatically after fault condition is removed All output equipped with short circuit SHORT CIRCUIT Protection type : Recovers automatically after fault condition is removed WORKING TEMP. ENVIRONMENT SPA01B-15 Note.4 ±0.5% VOLTAGE ACCURACY FILTER (Note. 5) SPA01A-15 15V DC CURRENT PROTECTION SPA01C-12 12V LOAD REGULATION INPUT SPA01B-12 5V RIPPLE & NOISE (max.) Note.2 60mVp-p LINE REGULATION Note.3 ±0.5% OUTPUT SPA01A-12 DC VOLTAGE -40 ~ +90℃ (Refer to "Derating Curve") WORKING HUMIDITY 20% ~ 90% RH non-condensing STORAGE TEMP., HUMIDITY -40 ~ +105℃, 10 ~ 95% RH ±0.05% / ℃ (0 ~ 50℃) TEMP. COEFFICIENT VIBRATION 10 ~ 500Hz, 2G 10min./1 cycle, period for 60min. each along X, Y, Z axes WITHSTAND VOLTAGE I/P-O/P:1.5KVDC SAFETY ISOLATION RESISTANCE ISOLATION CAPACITANCE I/P-O/P: 100M Ohms / 500VDC / 25℃/ 70% RH 80pF max. Compliance to EN55022 Class B, FCC part 15 Class B Compliance to EN61000-4-2,3,4,5,6,8 light industry level, criteria A OTHERS EMC EMISSION EMC IMMUNITY MTBF DIMENSION 500Khrs min. MIL-HDBK-217F(25℃) 17.4*7.75*11.1mm or 0.69"*0.30"*0.44" inch (L*W*H) WEIGHT 3g Unit:mm(inch) 2.54(0.1) 1 2 4 0.5 (0.02) 6 3.81±0.5(0.15) 5.08 5.08 (0.2) (0.2) BOTTOM VIEW 2.4(0.09) 7.75(0.3) 12.7(0.5) Pin No. Output 1 2 4 6 - Vi n + Vi n + Vo u t - Vo u t 100 LOAD (%) FRONT VIEW 11.1(0.44) 17.4(0.69) 0.55±0.05(0.02) Derating Curve Pin Configuration Mechanical Specification 60 -40 0 25 50 85 90 100 2.35(0.09) Ta (℃) NOTE 1.All parameters are specified at normal input, rated load, 25℃ 70% RH ambient. 2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor. 3.Line regulation is measured from low line to high line at rated load. 4.Load regulation is measured from 10% to 100% rated load. 5.Please prevent the converter from operating in overload or short circuit condition for more than 30 seconds. File Name:SPA01-SPEC 2016-06-22 PDF
Документация на серию SPA01 

SPA01.cdr

Дата модификации: 22.06.2016

Размер: 49.7 Кб

1 стр.

    Товары серии SPA01

    Наименование i Упаковка U вх Выход U вх ном. U1 I1 Шум КПД
    SPA01A-05 (MW)
     
    		в линейках 25 шт
    SPA01A-12 (MW)
     
    		в линейках 25 шт
    SPA01A-15 (MW)
     
    		в линейках 25 шт
    SPA01B-05 (MW)
     
    		в линейках 25 шт
    SPA01B-12 (MW)
     
    		в линейках 25 шт
    SPA01B-15 (MW)
     
    		в линейках 25 шт
    SPA01C-05 (MW)
     
    		1 шт
    SPA01C-12 (MW)
     
    		1 шт
    SPA01C-15 (MW)
     
    		1 шт