Серия DC-DC модульных преобразователей SPU03

Общие характеристики

	Раздел	DC-DC модульные преобразователи
	Монтаж
	Выходная мощность
	Количество каналов
	Возможности
	Комплекс защит
	Уровень пульсаций
	Напряжение изоляции вход-выход

Документация на серию SPU03

SPU03 3W DC-DC Unregulated Single Output Converter series ■ Features : 3000VDC I/O isolation Internal SMD technology Built-in EMI filter Protection: Short circuit Cooling by free air convection Non-conductive plastic case Single in line package 100% full load burn-in test Low cost / High reliability 2 years warranty SPECIFICATION ORDER NO. OUTPUT SPU03L-05 DC OUTPUT VOLTAGE 5V CURRENT RANGE 60 ~ 600mA EFFICIENCY (Typ.) 82% RATED POWER 3W SPU03L-12 SPU03M-12 SPU03N-12 12V 85% SPU03M-15 SPU03N-15 15V 25 ~ 250mA 83% 83% SPU03L-15 20 ~ 200mA 86% 86% 86% 86% 88% RIPPLE & NOISE (max.) Note.2 50mVp-p LINE REGULATION Note.3 ±1.2% for 1% input variation LOAD REGULATION Note.4 ±8.0% VOLTAGE ACCURACY ±2.0% SWITCHING FREQUENCY 60KHz min. VOLTAGE RANGE NORMAL VOLTAGE 4.5 ~ 5.5V 5V Full load 740mA No load 60mA INPUT CURRENT 155mA 715mA 300mA 150mA 705mA 300mA 145mA 15mA 65mA 25mA 15mA 65mA 30mA 15mA PROTECTION Fuse recommended Momentary Protection type : Broken Momentary SHORT CIRCUIT WORKING TEMP. Protection type : Broken -40 ~ +90℃ (Refer to "Derating Curve") WORKING HUMIDITY 20% ~ 90% RH non-condensing ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE SAFETY & ISOLATION RESISTANCE EMC ISOLATION CAPACITANCE -40 ~ +105℃, 10 ~ 95% RH ±0.03% / ℃ (0 ~ 50℃) 10 ~ 500Hz, 2G 10min./1 cycle, period for 60min. each along X, Y, Z axes EAC TP TC 020/2011 approved I/P-O/P:3KVDC I/P-O/P: 100M Ohms / 500VDC / 25℃/ 70% RH 80pF max. EMC EMISSION EMC IMMUNITY MTBF DIMENSION Compliance to BS EN/EN55032 Class B, FCC part 15 Class B , EAC TP TC 020 Compliance to BS EN/EN61000-4-2,3,4,5,6,8, light industry level, criteria A , EAC TP TC 020 WEIGHT 2.9g 700khrs min. MIL-HDBK-217F(25℃) 19.6*7.5*10.2mm or 0.77"*0.30"*0.40" inch (L*W*H) Derating Curve Pin Configuration Mechanical Specification Unit: mm (inch) 10.20 (0.40) 19.6 (0.77) 3.81 (0.15) FRONT VIEW 5.08 (0.20) 0.5 (0.02) 7.5 (0.3) 10.8 ~ 13.2V 21.6 ~ 26.4V 12V 24V 25mA Capacitor type OVERLOAD 10.8 ~ 13.2V 21.6 ~ 26.4V 4.5 ~ 5.5V 5V 12V 24V 305mA FILTER PROTECTION OTHERS 10.8 ~ 13.2V 21.6 ~ 26.4V 4.5 ~ 5.5V 5V 24V 12V Pin No. Output 1 +Vin 2 5 -Vin -Vout 7 +Vout 100 LOAD (%) INPUT Others 50 5V 1 2 2.54 (0.10) NOTE SPU03M-05 SPU03N-05 5 7 1.2 (0.05) BOTTOM VIEW NOTE:Pin size tolerance 0.50×0.30mm±0.05mm -40 0 50 75 85 100 Ta (℃) 1.All parameters are specified at normal input, rated load, 25℃ 70% RH ambient. 2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor. 3.Line regulation is measured from low line to high line at rated load. 4.Load regulation is measured from 20% to 100% rated load. ※ Product Liability Disclaimer：For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx File Name: SPU03-SPEC 2021-12-01

Документация на SPU03L-05

SPU03.cdr

Дата модификации: 25.11.2021

Размер: 55 Кб

1 стр.

SPU03 3W DC-DC Unregulated Single Output Converter ¡ ¡½ E ¡E ¡E ¡E ¡E ¡E ¡E ¡E ¡E ¡ E series Features : 3000VDC I/O isolation Internal SMD technology Built-in EMI filter Protection: Short circuit Cooling by free air convection Non-conductive plastic case Single in line package 100% full load burn-in test Low cost / High reliability 2 years warranty SPECIFICATION ORDER NO. OUTPUT SPU03L-05 SPU03L-12 DC OUTPUT VOLTAGE 5V 12V CURRENT RANGE 60 ~ 600mA 25 ~ 250mA EFFICIENCY (Typ.) 82% RATED POWER 3W 83% 83% 85% SPU03M-12 SPU03N-12 SPU03M-15 SPU03N-15 SPU03L-15 15V 20 ~ 200mA 86% 86% 86% 86% 88% RIPPLE & NOISE (max.) Note.2 50mVp-p LINE REGULATION Note.3 1.2% for 1% input variation LOAD REGULATION ¡Ó Ó¡ Ó¡ 2.0% Note.4 8.0% VOLTAGE ACCURACY SWITCHING FREQUENCY 60KHz min. VOLTAGE RANGE NORMAL VOLTAGE 4.5 ~ 5.5V 5V Full load 740mA No load 60mA INPUT CURRENT 10.8 ~ 13.2V 21.6 ~ 26.4V 12V 24V 155mA 715mA 300mA 150mA 705mA 300mA 145mA 25mA 15mA 65mA 25mA 15mA 65mA 30mA 15mA Capacitor type PROTECTION Fuse recommended Momentary Protection type : Broken OVERLOAD 10.8 ~ 13.2V 21.6 ~ 26.4V 4.5 ~ 5.5V 5V 12V 24V 305mA FILTER PROTECTION Momentary SHORT CIRCUIT WORKING TEMP. Protection type : Broken -40 ~ +90 (Refer to "Derating Curve") WORKING HUMIDITY 20% ~ 90% RH non-condensing ¢J ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION WITHSTAND VOLTAGE ISOLATION RESISTANCE SAFETY & ISOLATION CAPACITANCE EMC EMC EMISSION EMC IMMUNITY MTBF OTHERS DIMENSION ¢J ¢J -40 ~ +105 , 10 ~ 95% RH 0.03% / (0 ~ 50 ) 10 ~ 500Hz, 2G 10min./1 cycle, period for 60min. each along X, Y, Z axes I/P-O/P:3KVDC I/P-O/P: 100M Ohms / 500VDC / 25 / 70% RH ¡Ó ¢J ¢J 80pF max. Compliance to EN55022 Class B, FCC part 15 Class B Compliance to EN61000-4-2,3,4,5,6,8, light industry level, criteria A ¢J 700khrs min. MIL-HDBK-217F(25 ) 19.6*7.5*10.2mm or 0.77"*0.30"*0.40" inch (L*W*H) 2.9g WEIGHT Derating Curve Pin Configuration Mechanical Specification Unit: mm (inch) 10.20 (0.40) 19.6 (0.77) 3.81 (0.15) FRONT VIEW 5.08 (0.20) 0.5 (0.02) 7.5 (0.3) 10.8 ~ 13.2V 21.6 ~ 26.4V 4.5 ~ 5.5V 5V 12V 24V Pin No. Output 1 +Vin 2 5 -Vin -Vout 7 +Vout 100 LOAD (%) INPUT Others 50 5V 1 2 2.54 (0.10) NOTE SPU03M-05 SPU03N-05 5 7 1.2 (0.05) BOTTOM VIEW NOTE:Pin size tolerance 0.50¡Ñ0.30mm¡Ó0.05mm ¢J -40 0 50 75 85 100 Ta ( ¢J) 1.All parameters are specified at normal input, rated load, 25 70% RH ambient. 2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor. 3.Line regulation is measured from low line to high line at rated load. 4.Load regulation is measured from 20% to 100% rated load. File Name: SPU03-SPEC 2012-07-18

Документация на серию SPU03

SPU03.cdr Keywords:

Дата модификации: 25.07.2012

Размер: 67.5 Кб

1 стр.

найти SPU03.pdf

Товары серии SPU03

Наименование	i	Упаковка	U вх	Выход	U вх ном.	U1	I1	КПД	Размер	T раб
SPU03L-05 (MW)		в линейках 25 шт							19.6×7.1×10.2 мм
SPU03L-12 (MW)		10 шт							—
SPU03L-15 (MW)		3 шт							19.6×7.5×10.2 мм
SPU03M-05 (MW)		в линейках 10 шт							19.6×7.5×10.2 мм
SPU03M-12 (MW)		10 шт							19.6×7.1×10.2 мм
SPU03M-15 (MW)		1 шт							19.6×7.5×10.2 мм
SPU03N-05 (MW)		10 шт							19.6×7.1×10.2 мм
SPU03N-12 (MW)		1 шт							19.6×7.5×10.2 мм
SPU03N-15 (MW)		10 шт							19.6×7.5×10.2 мм