Серия алюминиевых конденсаторов UUA

Общие характеристики

Раздел Алюминиевые конденсаторы
Допуск ёмкости
Рабочая температура
Способ монтажа

Документация на серию UUA

ALUMINUM ELECTROLYTIC CAPACITORS UUA 6mmL Chip Type, Long Life Assurance Chip type with load life of 3000 to 5000 hours at +105°C. Designed for surface mounting on high density PC board. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). AEC-Q200 compliant. Please contact us for details. UUL Long Life UUA Long Life UUT Specifications Item Performance Characteristics Category Temperature Range –55 to +105°C Rated Voltage Range 6.3 to 50V Rated Capacitance Range 1 to 1000µF Capacitance Tolerance ± 20% at 120Hz, 20°C Leakage Current After 2 minutes' application of rated voltage at 20°C, leakage current is not more than 0.01 CV or 3 (µA) , whichever is greater. Measurement frequency : 120Hz at 20°C 6.3 0.28 10 0.24 Tangent of loss angle (tan δ) Rated voltage (V) tan δ (MAX.) Stability at Low Temperature Rated voltage (V) Z– 25°C / Z+20°C Impedance ratio 16 0.20 25 0.16 35 0.13 50 0.12 Measurement frequency : 120Hz ZT / Z20 (MAX.) Z– 55°C / Z+20°C 6.3 4 10 50 2 3 35 2 3 25 2 3 16 2 5 10 3 7 The specifications listed at right shall be met Within ±30% of the initial capacitance value Capacitance change when the capacitors are restored to 20°C 300% or less than the initial specified value tan δ after the rated voltage is applied for 5000 Less than or equal to the initial specified value Leakage current hours (3000 hours for φD = 4, 5 and 6.3) at 105°C. After storing the capacitors under no load at 105°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. The capacitors are kept on a hot plate for 30 seconds, which is Capacitance change Within ±10% of the initial capacitance value maintained at 250°C. The capacitors shall meet the characteristic Less than or equal to the initial specified value tan δ requirements listed at right when they are removed from the plate Less than or equal to the initial specified value Leakage current and restored to 20°C. Endurance Shelf Life Resistance to soldering heat Black print on the case top. Marking Chip Type Type numbering system (Example : 16V 10µF) (φ4 to φ6.3) Plastic platform Series C±0.2 B±0.2 A2 33 j UA φD±0.5 0.3MAX. H L±0.3 2 3 4 5 6 7 8 9 10 11 12 13 14 Taping code Configuration Capacitance tolerance (±20%) φD 4 to 6.3 8 • 10 Rated capacitance (10 µF) Negative Capacitance Lot No. 1 UU A 1 C 1 0 0 MC L 1 GS A±0.2 E A±0.2 Voltage ( j : 6.3V) 0.5MAX. Positive Rated voltage (16V) Code CL NL Series name Type Positive (φ8,φ10) C±0.2 B±0.2 φD±0.5 0.3MAX. H L±0.5 Lot No. Voltage V 6.3 Code j Capacitance φD A±0.2 E A±0.2 Series 0.5MAX. (mm) Plastic platform A2 100V UA Voltage ( V : 35V) Trade mark Negative Pressure relief vent ×L 10 × 10 4 × 5.8 5 × 5.8 6.3 × 5.8 6.3 × 7.7 8 × 10 A 1.8 2.1 2.4 2.4 2.9 3.2 B 4.3 5.3 6.6 6.6 8.3 10.3 C 4.3 5.3 6.6 6.6 8.3 10.3 E 1.0 1.3 2.2 2.2 3.1 4.5 L 5.8 5.8 5.8 7.7 10 10 H 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.8 to 1.1 0.8 to 1.1 Frequency coefficient of rated ripple current 10 A 16 C 25 E 35 V 50 H Frequency Coefficient 50 Hz 0.70 120 Hz 1.00 300 Hz 1.17 1 kHz 1.36 10 kHz or more 1.50 Dimension table in next page. CAT.8100K PDF
Документация на UUA0J101MCL1GS 

cs4のpdfを2019に直接貼ったデータ.indd

Дата модификации: 27.08.2021

Размер: 876.3 Кб

2 стр.

    Товары серии UUA

    Наименование i Упаковка Ёмкость Напряжение Диаметр Высота Размер
    UUA0J101MCL1GS (NICHICON)
     
    6.3×6.3×6.6 мм
    UUA0J102MNL1GS (NICHICON)
     
    10×10×10.3 мм
    UUA0J220MCL1GS (NICHICON)
     
    4×4×4.3 мм
    UUA0J221MCL1GS (NICHICON)
     
    6.3×6.3×6.6 мм
    UUA0J330MCL1GS (NICHICON)
     
    5×5×5.3 мм
    UUA0J331MNL1GS (NICHICON)
     
    8×8×8.3 мм
    UUA0J470MCL1GS (NICHICON)
     
    5×5×5.3 мм
    UUA0J471MNL1GS (NICHICON)
     
    1 шт 10×10×10.3 мм
    UUA1A101MCL1GS (NICHICON)
     
    6.3×6.3×6.6 мм
    UUA1A220MCL1GS (NICHICON)
     
    5×5×5.3 мм
    UUA1A221MNL1GS (NICHICON)
     
    8×8×8.3 мм
    UUA1A330MCL1GS (NICHICON)
     
    5×5×5.3 мм
    UUA1A331MNL1GS (NICHICON)
     
    10×10×10.3 мм
    UUA1A470MCL1GS (NICHICON)
     
    6.3×6.3×6.6 мм
    UUA1A471MNL1GS (NICHICON)
     
    1 шт 10×10×10.3 мм
    UUA1C100MCL1GS (NICHICON)
     
    4×4×4.3 мм
    UUA1C101MCL1GS (NICHICON)
     
    1 шт 6.3×6.3×6.6 мм
    UUA1C220MCL1GS (NICHICON)
     
    5×5×5.3 мм
    UUA1C221MNL1GS (NICHICON)
     
    10×10×10.3 мм
    UUA1C330MCL1GS (NICHICON)
     
    6.3×6.3×6.6 мм
    UUA1C331MNL1GS (NICHICON)
     
    10×10×10.3 мм
    UUA1C470MCL1GS (NICHICON)
     
    6.3×6.3×6.6 мм
    UUA1C471MNL1GS (NICHICON)
     
    800 шт 10×10×10.3 мм
    UUA1E100MCL1GS (NICHICON)
     
    5×5×5.3 мм
    UUA1E101MNL1GS (NICHICON)
     
    8×8×8.3 мм
    UUA1E220MCL1GS (NICHICON)
     
    6.3×6.3×6.6 мм
    UUA1E221MNL1GS (NICHICON)
     
    1 шт 10×10×10.3 мм
    UUA1E330MCL1GS (NICHICON)
     
    6.3×6.3×6.6 мм
    UUA1E331MNL1GS (NICHICON)
     
    10×10×10.3 мм
    UUA1E470MCL1GS (NICHICON)
     
    6.3×6.3×6.6 мм
    UUA1H010MCL1GS (NICHICON)
     
    4×4×4.3 мм
    UUA1H100MCL1GS (NICHICON)
     
    1 шт 6.3×6.3×6.6 мм
    UUA1H101MNL1GS (NICHICON)
     
    1 шт 10×10×10.3 мм
    UUA1H220MCL1GS (NICHICON)
     
    6.3×6.3×6.6 мм
    UUA1H2R2MCL1GS (NICHICON)
     
    4×4×4.3 мм
    UUA1H330MNL1GS (NICHICON)
     
    8×8×8.3 мм
    UUA1H3R3MCL1GS (NICHICON)
     
    4×4×4.3 мм
    UUA1H470MNL1GS (NICHICON)
     
    8×8×8.3 мм
    UUA1H4R7MCL1GS (NICHICON)
     
    5×5×5.3 мм
    UUA1V100MCL1GS (NICHICON)
     
    5×5×5.3 мм
    UUA1V101MNL1GS (NICHICON)
     
    1 шт 10×10×10.3 мм
    UUA1V220MCL1GS (NICHICON)
     
    6.3×6.3×6.6 мм
    UUA1V221MNL1GS (NICHICON)
     
    10×10×10.3 мм
    UUA1V330MCL1GS (NICHICON)
     
    6.3×6.3×6.6 мм
    UUA1V470MNL1GS (NICHICON)
     
    8×8×8.3 мм
    UUA1V4R7MCL1GS (NICHICON)
     
    4×4×4.3 мм