Серия изоляторов цифровых сигналов NSIP894x

Novosense

Общие характеристики

 Раздел Изоляторы цифровых сигналов
Корпус DFN16
Напряжение изоляции RMS
Кол-во передатчиков
Кол-во приемников
Скорость передачи данных
Максимальная задержка сигнала
Диапазон напряжений питания
Рабочая температура

Документация на серию NSIP894x

NSiP8940/NSiP8941/NSiP8942/NSiP8943/NSiP8944 Quad-Channel Digital Isolators with Integrated DC to DC Converter Datasheet (EN) 1.2 Product Overview The NSiP894x devices are quad-channel digital isolators with integrated isolated DC-DC converter. The isolated DC-DC converter provides up to 500mW output power using on chip transformer. The feedback PWM signal is sent to primary side by a digital isolator based on Novosense capacity isolation technology. The high integrated solution can help to simplify system design and improve reliability. The NSiP894x device is safety certified by UL1577 support 4.5kVrms withstand voltages, while providing high electromagnetic immunity and low emissions. The data rate of the NSiP894x is up to 150Mbps, and the common-mode transient immunity (CMTI) is up to 150kV/us. The NSiP894x devices provide 5V to 5V, 5V to 3.3V, 3.3V to 3.3V conversion mode, the output voltage can be set by SEL pin. The device can go into standby mode when the PDIS pin set to high, and there is no output voltage at VISO pin. Key Features  Up to 4500Vrms Insulation voltage Safety Regulatory Approvals  UL recognition: up to 4500Vrms for 1 minute per UL1577  CQC certification per GB4943.1-2011  CSA component notice 5A  DIN VDE V 0884-11:2017-01 Applications  Industrial automation system  Isolated SPI, RS232, RS485  General-purpose multichannel isolation Device Information Part Number NSiP894x-DSWR Package SOW16 Body Size 10.30mm × 7.50mm  Power supply voltage: 3.3V to 5.5V  5V to 5V, 5V to 3.3V, support 100mA load current Functional Block Diagrams  3.3V to 3.3V, support 60mA load current  Over current and over temperature protection VDD 1 16 VISO  Date rate: DC to 150Mbps GND1 2 15 GND2  High CMTI: 150kV/us INA 3 14 OUTA  Propagation delay: <15ns INB 4 13 OUTB INC 5 12 OUTC IND 6 11 OUTD  High system level EMC performance: Enhanced system level ESD, EFT, Surge immunity PDIS 7 GND1 8  Operation temperature: -40℃~125℃  RoHS-compliant packages: SOW16 Copyright © 2020, NOVOSENSE 10 SEL NSiP894x 9 GND2 Figure 1. NSiP894x Block Diagram1 1 The isolation channel direction can be either depend on different part number. Page 1 PDF
Документация на серию NSIP894x 

Дата модификации: 10.05.2022

Размер: 1.34 Мб

20 стр.

    Товары серии NSIP894x

    Наименование i Упаковка
    NSIP8940D0-DDPR (NOVOSENS)
     
     
    		 1000 шт
    NSIP8940D1-DDPR (NOVOSENS)
     
     
    		 1000 шт
    NSIP8940W0-DSWR (NOVOSENS)
     
    NSIP8940W1-DSWR (NOVOSENS)
     
     
    NSIP8941D0-DDPR (NOVOSENS)
     
     
    		 1000 шт
    NSIP8941D1-DDPR (NOVOSENS)
     
     
    		 1000 шт
    NSIP8941W0-DSWR (NOVOSENS)
     
     
    		 15 шт
    NSIP8941W1-DSWR (NOVOSENS)
     
     
    		 в ленте 1000 шт
    NSIP8942D0-DDPR (NOVOSENS)
     
     
    		 1000 шт
    NSIP8942D1-DDPR (NOVOSENS)
     
     
    		 1000 шт
    NSIP8942W0-DSWR (NOVOSENS)
     
     
    NSIP8942W1-DSWR (NOVOSENS)
     
     
    		 1 шт
    NSIP8943D0-DDPR (NOVOSENS)
     
     
    		 1000 шт
    NSIP8943D1-DDPR (NOVOSENS)
     
     
    		 1000 шт
    NSIP8943W0-DSWR (NOVOSENS)
     
     
    NSIP8943W1-DSWR (NOVOSENS)
     
     
    NSIP8944D0-DDPR (NOVOSENS)
     
     
    		 1000 шт
    NSIP8944D1-DDPR (NOVOSENS)
     
     
    		 1000 шт
    NSIP8944W0-DSWR (NOVOSENS)
     
     
    NSIP8944W1-DSWR (NOVOSENS)