Серия алюминиевых конденсаторов A

Общие характеристики

	Раздел	Алюминиевые конденсаторы
	Допуск по ёмкости
	Температура рабочая
	Способ монтажа

Документация на серию A

Aluminum Electrolytic Capacitor/V-A Surface Mount Type Series: A Type : V ■ Features Discontinued Endurance :85°C 2000 h ■Specification Operating temp. range Rated W.V. range Nominal cap. range Capacitance tol. DC leakage current tan δ -40 to + 85°C 4 to 50 V .DC 0.1 to 820 µ F ±20 % (120Hz/+20°C) I < 0.01 CV or 3(µ A) after 2min. (Bi-Polar I<0.02 CV or 6 (µA) after 2min. (Whichever is the greater) Bi-Polar Polarized W.V. tan δ (120Hz / +20°C) Characteristics at Low Temperature 4 6.3 10 16 25 35 50 W.V. tan δ 0.35 0.26 0.20 0.16 0.14 0.12 0.12 W.V. (V) -25 / +20 °C -40 / +20 °C 4 7 15 6.3 4 8 10 3 6 16 2 4 25 2 4 35 2 3 4 6.3 10 16 25 35 50 0.70 0.52 0.40 0.32 0.28 0.24 0.24 50 2 3 (Impedance ratio at 120Hz) After applying rated working voltage for 1000 hours at +85 ± 2°C, and then being stabilized at +20°C, capacitance shall meet following limits. (φ8,φ10 : +85°C 2000h) Endurance Capacitance change tan δ DC leakage current < ±20% of initial measured value (4W.V.: < ±30%) < 200% of initial specified value < initial specified value After storage for 1000 hours at +85°C with no voltage applied and then being stabilized at +20°C, capacitor shall meet the limits specified in “Endurance”. Shelf life After being placed for 30 seconds on a plate(termination face down on to the plate) heated to +250°C and then being stabilized at +20°C, capacitor shall meet the following limits. Resistance to Soldering Heat Capacitance change tan δ DC leakage current < ±10% of initial measured value < initial specified value < initial specified value ■Explanation of Part Number E C E Common code V Shape W.V. code Series code Series code A Size code B,C,D,E,F,G Capacitance code Taped on reel AN B,C,D Polarized R P Bi-polar P ■ Marking Suffix W=12 mm φ4 (B) W=16 mm φ5, φ6.3, φ8x6.2(C.D.E) W=24 mm φ8x10.2, φ10x10.2(F,G) ■ Dimensions in mm (not to scale) ( ) reference size 50 A Series identification (No marking : A size) E,F,G= L±0.3 Size D code B 4.0 C 5.0 D 6.3 E 8.0 8.0 F G 10.0 L 5.4 5.4 5.4 6.2 10.2 10.2 L+0.1 -0.2 A 4.3 5.3 6.6 8.3 8.3 10.3 (I) Capacitance (µF) (P) K 1 H φD±0.5 Rated voltage (V.DC) (-): Negative polarity marking (No marking for bi-polar) (I) @ A±0.2 0.3 max Example : 50V1µF w H I 5.5 MAX 6.5 MAX 7.8 MAX 9.5 MAX 10.0 MAX 12.0MAX 1.8 2.2 2.6 3.4 3.4 3.5 W 0.65 ± 0.1 0.65±0.1 0.65± 0.1 0.65±0.1 0.90±0.2 0.90±0.2 P 1.0 1.5 1.8 2.2 3.1 4.6 (mm) K 0.35 0.35 0.35 0.35 0.70 0.70 -0.20 to +0.15 -0.20 to +0.15 -0.20 to +0.15 -0.20 to +0.15 ±0.2 ±0.2 Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consulation without fail. Mar. 2005 Ñ EE1 Ñ

PDF

Документация на ECEV0GA330R

EDE01_V-A.p65

Дата модификации: 16.03.2005

Размер: 182.8 Кб

9 стр.

найти A.pdf

Товары серии A

Наименование	Ёмкость	Напряжение	Ток пульсаций НЧ	Высота	Размер
ECEV0GA330R (PAN)				—	—
ECEV0JA101P (PAN)					7.8 мм
ECEV0JA102P (PAN)					12 мм
ECEV0JA331P (PAN)					9.5 мм
ECEV0JA470P (PAN)					6.5 мм
ECEV0JA471P (PAN)					10 мм
ECEV0JA821P (PAN)					12 мм
ECEV1AA221P (PAN)					9.5 мм
ECEV1AA331P (PAN)					10 мм
ECEV1AA471P (PAN)					12 мм
ECEV1CA100R (PAN)					5.5 мм
ECEV1CA220P (PAN)					6.5 мм
ECEV1CA221P (PAN)					10 мм
ECEV1CA331P (PAN)					12 мм
ECEV1CA470P (PAN)					7.8 мм
ECEV1CA471P (PAN)					12 мм
ECEV1EA100P (PAN)					6.5 мм
ECEV1EA101P (PAN)					10 мм
ECEV1EA221P (PAN)					12 мм
ECEV1EA4R7R (PAN)					5.5 мм
ECEV1HA010R (PAN)					5.5 мм
ECEV1HA330P (PAN)					10 мм
ECEV1HA3R3R (PAN)					5.5 мм
ECEV1HA470P (PAN)					12 мм
ECEV1HA4R7P (PAN)					6.5 мм
ECEV1HAR33R (PAN)					5.5 мм
ECEV1VA101P (PAN)					12 мм
EECW1R8A1 (PAN)	—	—	—	—	—