Серия Электромеханических реле DK1

Общие характеристики

	Раздел	Реле электромеханические
	Тип контактов
	Тип тока катушки
	Мощность катушки максимальная
	Номинальный ток коммутации
	Коммутируемое напряжение DC (макс)
	Коммутируемое напряжение AC (пиковое)
	Напряжение изоляции катушка-контакты
	Рабочая температура
	Размер	20×12.5×10 мм
	Способ подключения выводов
	Особенности
	Применение

Документация на серию DK1

VDE 10 A MINIATURE POWER RELAY 20 .787 12.5 .492 20 .787 • Large capacity in small size: 10 A 250 V AC (1a) • High sensitivity: 200 mW nominal operating power • High breakdown voltage 4,000 Vrms between contacts and coil 1,000 Vrms between open contacts Meeting FCC Part 68 • Sealed construction • Latching types available 10 .394 1a DK RELAYS FEATURES 15 .591 10 .394 DK 1a1b mm inch SPECIFICATIONS Contact Arrangement Initial contact resistance, max. (By voltage drop 6 V DC 1A) Contact material Nominal switching capacity Max. switching power Rating Max. switching (resistive) voltage Max. switching current Min. switching capacity#1 Mechanical Expected life (min. Electrical operations) (resistive) Characteristics 2 Form A, 1 Form A 1 Form B 1 Form A Max. operating speed Initial insulation resistance*1 Between open Initial contacts breakdown Between contacts voltage*2 and coil Surge voltage between coil and contact*3 30 mΩ Gold flash over silver alloy 10 A 250 V AC 8 A 250 V AC 10 A 30 V DC 8 A 30 V DC 300 W, 2,500 VA 240 W, 2,000 VA 250 V AC, 30 V DC 250 V AC, 30 V DC 10 A 8A Vibration resistance Coil Min. 10,000 V Remarks * Specifications will vary with foreign standards certification ratings. *1 Measurement at same location as “Initial breakdown voltage” section *2 Detection current: 10 mA *3 Wave is standard shock voltage of ±1.2 × 50µs according to JEC-212-1981 *4 Excluding contact bounce time *5 Half-wave pulse of sine wave: 11ms; detection time: 10µs *6 Half-wave pulse of sine wave: 6ms *7 Detection time: 10µs *8 Refer to 6. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT Unit weight Max. 10 ms (Approx. 5 ms) Max. 8 ms (Approx. 3 ms) Ambient temp. Max. 40°C with nominal coil voltage and at 10 A switching current Min. 98 m/s2 {10 G} Min. 980 m/s2 {100 G} 88.2 m/s2 {9 G}, 10 to 55 Hz at double amplitude of 1.5 mm 176.4 m/s2 {18 G}, 10 to 55 Hz at double amplitude of 3.0 mm –40°C to +65°C –40°F to +149°F Humidity 5 to 85% R.H. Functional*7 Destructive Conditions for operation, transport and storage*8 (Not freezing and condensing at low temperature) 200 mW #1 This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. • Switching power supply • Power switching for various OA equipment • Control or driving relays for industrial machines (robotics, numerical control machines, etc.) • Output relays for programmable logic controllers, temperature controllers, timers and so on. • Home appliances 4,000 Vrms Operate time* (at nominal voltage) Release time (without diode)*4 (at nominal voltage) Temperature rise (at nominal voltage) Functional*5 Shock resistance Destructive*6 5×107 105 105 (10 A 250 V AC, (8 A 250 V AC, 10 A 30 V DC) 8 A 30 V DC) TYPICAL APPLICATIONS 1,000 Vrms 4 10 mA, 5 V DC Nominal operating power 20 cpm (at rated load) Min. 1,000 mΩ (at 500 V DC) 1 Form A 1 Form A 1 Form B, 2 Form A Approx. 5.6 g .20 oz Approx. 6 g .21 oz ORDERING INFORMATION Ex. DK Contact arrangement 1a: 1 Form A 2a: 2 Form A 1a1b: 1 Form A 1 Form B 1a L2 12V Operating function Coil voltage Nil: Single side stable L2: 2 coil latching 3, 5, 6, 9, 12, 24V Environmental support • RoHS Directive conforming type (AgSnO2 type) F: 1a Nil: 2a, 1a1b • RoHS Directive non-conforming type (AgCdO type) Nil: 1a Notes: 1. Standard packing Carton: 50 pcs.; Case: 500 pcs. UL/CSA, TÜV approved type is standard. 2. 1 coil latching type available. All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd. F  PDF

Документация на DK1A-24V 

Дата модификации: 18.10.2005

Размер: 137.2 Кб

5 стр.

• найти DK1.pdf

Товары серии DK1

Наименование	i	Упаковка	Uкатушки	Магнитная система
DK1A-24V (PAN)
DK1A-3V (PAN)
DK1A-6V (PAN)
DK1A-9V (PAN)
DK1A-L2-9V (PAN)