Серия алюминиевых конденсаторов EEE-HD

Общие характеристики

	Раздел	Алюминиевые конденсаторы
	Ёмкость номинальная
	Допуск по ёмкости
	Напряжение номинальное
	Температура рабочая
	Высота корпуса
	Способ монтажа
	Ток пульсаций низких частот
	Диаметр x Высота	5.5 мм

Документация на серию EEE-HD

Aluminum Electrolytic Capacitors/ HD Surface Mount Type Series: HD V Type: 6.3V to 35V : High temperature Lead-Free reflow (suffix:A✽) 50V to 100V : Standard Lead-Free reflow ■ Features ● ● ● ● Endurance: 105 °C 5000 h Vibration-proof product is available upon request. (08 mm and larger) AEC-Q200 qualified ✽ RoHS directive compliant ■ Specifications Category Temp. Range –40 °C to +105 °C Rated W.V. Range 6.3 V.DC to 100 V.DC Nominal Cap. Range 1 μF to 1000 μF Capacitance Tolerance ±20 % (120 Hz/+20 °C) I < 0.01 CV or 3 (μA) After 2 minutes (Whichever is greater) Please see the attached High temperature lead-free reflow products list. DC Leakage Current tan d Characteristics at Low Temperature W.V. (V) 6.3 10 16 25 35 50 63 100 Z(–25 °C)/Z(+20 °C) 3 3 2 2 2 2 2 2 (Impedance ratio at 120 Hz) Endurance Z(–40 °C)/Z(+20 °C) 4 4 3 3 3 3 3 3 After applying rated working voltage for 5000 hours at +105 °C±2 °C and then being stabilized at +20 °C, capacitors shall meet the following limits. Capacitance change ±30 % of initial measured value Shelf Life tan d < 300 % of initial specified value DC leakage current < initial specified value After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) Capacitance change ±20 % of initial measured value < 200 % of initial specified value < initial specified value tan d DC leakage current After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits. Resistance to Soldering Heat Capacitance change ±10 % of initial measured value tan d DC leakage current < initial specified value < initial specified value ■ Frequency correction factor for ripple current Frequency (Hz) 50, 60 0.70 Correction factor 1k 1.30 10 k to 1.70 ■ Dimensions in mm (not to scale) H J 2A (P) B±0.2 Series identification + L Mark for Lead-Free Products Black Dot (Square) Rated voltage Mark W Pressure Relief (010 and larger) Lot number Rated Voltage Mark j 6.3 V A 10 V C 16 V E 25 V V 35 V H 0D±0.5 Capacitance (μF)  K )% A±0.2 – 50 V 63 V 100 V Size D code B 4.0 C 5.0 D 6.3 D8 6.3 E 8.0 F 8.0 G 10.0 L 5.8±0.3 5.8±0.3 5.8±0.3 7.7±0.3 6.2±0.3 10.2±0.3 10.2±0.3 A, B H 4.3 5.5 max. 5.3 6.5 max. 6.6 7.8 max. 6.6 7.8 max. 8.3 9.5 max. 8.3 10.0 max. 10.3 12.0 max. (I) 0.3 max. Negative polarity marking (–) (Unit : mm) (I) Example: 6.3 V 330 μF Marking color: BLACK K ■ Marking 120 1.00 ( ) Reference size I 1.8 2.2 2.6 2.6 3.4 3.4 3.5 W 0.65±0.1 0.65±0.1 0.65±0.1 0.65±0.1 0.65±0.1 0.90±0.2 0.90±0.2 P 1.0 1.5 1.8 1.8 2.2 3.1 4.6 K + 0.15 - 0.20 + 0.15 - 0.20 + 0.15 - 0.20 + 0.15 - 0.20 + 0.15 - 0.20 0.35 0.35 0.35 0.35 0.35 0.70±0.20 0.70±0.20 ✽ This product qualify for AEC-Q200, but it has some deviations. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 03 Mar. 2014 – EEE-29 –  PDF

Документация на EEEHD1HR47R 

AEC_V-HDA_E.indd

Дата модификации: 24.03.2014

Размер: 79.4 Кб

2 стр.

• найти EEE-HD.pdf

Товары серии EEE-HD