Серия алюминиевых конденсаторов EET-HC

Panasonic Industrial Europe GmbH

Общие характеристики

	Раздел	Алюминиевые конденсаторы
	Допуск по ёмкости
	Температура рабочая
	Способ монтажа
	Шаг между выводами

Документация на серию EET-HC

Aluminum Electrolytic Capacitors/ HC Snap-in Type Series: HC Type: TS ■ Features ● Endurance : 105 °C 2000 h ● 30 % smaller than series TS-HB ● RoHS directive compliant ■ Specifications Category Temp. Range Rated W.V. Range Nominal Cap. Range Capacitance Tolerance –40 °C to +105 °C 10 V.DC to 100 V.DC 160 V.DC to 250 V.DC 820 μF to 100000 μF 150 μF to 3300 μF ±20 % (120 Hz/+20 °C) –25 °C to +105 °C 315 V.DC to 450 V.DC 39 μF to 1000 μF 3√ CV (μA) max. After 5 minutes application of rated working voltage at +20 °C. C : Capacitance (μF) V: W.V. (V.DC) DC Leakage Current tan d Please see the attached standard products list After 2000 hours application of DC voltage with speciﬁed ripple current (< rated DC working voltage) at +105 °C±2 °C, the capacitors shall meet the following limits. Capacitance change < ±20 % of initial measured value tan d < 200 % of initial speciﬁed value DC leakage current < initial speciﬁed value After storage for 1000 hours at +105 °C±2 °C within no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits speciﬁed in Endurance. (With voltage treatment) Endurance Shelf Life ■ Frequency correction factor for ripple current Rated Voltage 50 0.93 0.75 10 V.DC to 100 V.DC /C.F. 160 V.DC to 450 V.DC /C.F. 60 0.95 0.80 100 0.99 0.95 Frequency (Hz) 120 1.00 1.00 500 1.05 1.20 1k 1.08 1.25 ■ Dimensions in mm (not to scale) 0D+1.0 max. Polarity bar 10 k to 1.15 1.40 (Unit : mm) (1 0.0 ) Sleeve 2-02.0±0.1 10 .0± 0.1 Vent L+2.0 max. (0D) 4.0±0.5 Rated voltage etc. indicate to sleeve. Recommended PWB piercing plan 4.0±0.5 +0.2 2.0 max. Terminal (t=0.8) (3.5) 0.8 –0.1 1.5±0.2 Top of spin Standard terminal type does not require terminal trimming peocess. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Sep. 2013 – EEE-135 –

Документация на EETHC2W101HJ

series catalog

Дата модификации: 16.05.2018

Размер: 276.9 Кб

13 стр.

найти EET-HC.pdf

Товары серии EET-HC

Наименование	i	Упаковка	Ёмкость	Напряжение	Диаметр	Высота	Ток пульсаций НЧ	Размер	ESR
EETHC2F151HJ (PAN)								22×22×25 мм	—
EETHC2G471KJ (PAN)								30×30×45 мм
EETHC2G821LJ (PAN)								35×35×50 мм
EETHC2W151HJ (PAN)								22×22×40 мм
EETHC2W561LJ (PAN)		1 шт						35×35×50 мм