Серия алюминиевых конденсаторов EET-HD

Panasonic Industrial Europe GmbH

Общие характеристики

 Раздел Алюминиевые конденсаторы
Допуск по ёмкости
Температура рабочая
Способ монтажа
Шаг между выводами

Документация на серию EET-HD

Aluminum Electrolytic Capacitors/ HD Snap-in Type Series: HD Type: TS ■ Features ● Endurance : 105 °C 3000 h ● 30 % smaller than series TS-HC ● RoHS directive compliant ■ Specifications Category Temp. Range Rated W.V. Range Nominal Cap. Range Capacitance Tolerance –25 °C to +105 °C 400 V.DC to 450 V.DC 120 μF to 680 μF ±20 % (120 Hz/+20 °C) 3√ CV (μA) max. After 5 minutes application of rated working voltage at +20 °C. C : Capacitance (μF) V: W.V. (V.DC) DC Leakage Current tan d Please see the attached standard products list After 3000 hours application of DC voltage with specified ripple current (< rated DC working voltage) at +105 °C, the capacitors shall meet the following limits. Capacitance change < ±20 % of initial measured value tan d < 200 % of initial specified value DC leakage current < initial specified value After storage for 1000 hours at +105 °C±20 °C within no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) Endurance Shelf Life ■ Frequency correction factor for ripple current 50 0.75 Correction factor 60 0.80 100 0.95 Frequency (Hz) 120 1.00 500 1.20 1k 1.25 ■ Dimensions in mm (not to scale) 0D+1.0 max. Polarity bar 10 k to 1.40 (Unit : mm) (1 0.0 ) P.E.T. Sleeve 2-02.0±0.1 10 .0± 0.1 Vent L+2.0 max. (0D) 4.0±0.5 Rated voltage etc. indicate to sleeve. Recommended PWB piercing plan 4.0±0.5 +0.2 2.0 max. Terminal (t=0.8) (3.5) 0.8 –0.1 1.5±0.2 Top of spin Standard terminal type does not require terminal trimming peocess. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Sep. 2013 – EEE-148 – PDF
Документация на EETHD2G331LJ 

series catalog

Дата модификации: 16.05.2018

Размер: 169.2 Кб

2 стр.

    Товары серии EET-HD

    Наименование i Упаковка Ёмкость Напряжение Диаметр Высота Ток пульсаций НЧ Размер
    EETHD2G331LJ (PAN)
     
     
    		 35×35×25 мм
    EETHD2G391JJ (PAN)
     
     
    		 1 шт 25×25×45 мм
    EETHD2G471JJ (PAN)
     
     
    		 25×25×50 мм
    EETHD2G471KJ (PAN)
     
     
    		 30×30×35 мм
    EETHD2G471LJ (PAN)
     
     
    		 35×35×30 мм
    EETHD2G561KJ (PAN)
     
     
    		 30×30×40 мм
    EETHD2S391KJ (PAN)
     
     
    		 30×30×40 мм
    EETHD2W471KJ (PAN)
     
     
    		 30×30×45 мм
    EETHD2W471LJ (PAN)
     
     
    		 35×35×35 мм
    EETHD2W561KJ (PAN)
     
     
    		 30×30×50 мм
    EETHD2W561LJ (PAN)
     
     
    		 35×35×40 мм