Серия постоянных резисторов ERJMB1

Panasonic Industrial Europe GmbH

Общие характеристики

 Раздел Резисторы постоянные
Допуск по сопротивлению
Мощность рассеиваемая
Температурный коэффициент сопротивления
Корпус производителя
Способ монтажа
Температура рабочая
Размер 2.55×5×0.9 мм

Документация на серию ERJMB1

Current Sensing Resistors, Metal Plate Type ERJ MS, MB type ERJ MS4, MB1 series Features ● ● ● ● ● ● ● Ideal for current sensing solution Small case size with high power Metal plate bonding technology. Excellent long term stability Outer Resin with high heat dissipation. Wide temperature range（-65 ℃ to +170 ℃） AEC-Q200 compliant RoHS compliant ISO9001，ISO/TS16949 certified ■ As for packaging methods, land pattern, soldering conditions and safety precautions, please see data files. Explanation of part numbers 1T ERJS02 ～ ERJS1Tシリーズ 1 2 3 4 5 6 7 8 9 10 E R J M S 4 S F 2 M Product code Type code Resistance tolerance Metal plate chip resistors Code inch size Electrode type Code Tolerance S4S 2512 Standard S4H 2512 Narrow B1S 1020 Standard F ±1 ％ 11 12 U 0 Resistance value Packaging methods Code Shown by 3 digits or letters.Decimal point is expressed by M as 2.0 mΩ=2M0, 10.0 mΩ=10Ｍ Packaging Part No. Embossed carrier taping U 4 mm pitch, 2,000 pcs Embossed carrier taping 4 mm pitch, 3,000 pcs ERJMS4 ERJMB1 Ratings Category temperature range （℃） Terminal temp. upper limit （℃） AEC-Q200 Grade ±75 –65 to +170 130 Grade 0 F : ±1 F : ±1 ±75 ±75 –65 to +170 –65 to +170 130 100 Grade 0 F : ±1 ±75 –65 to +170 130 Grade 0 Part No. (inch size) Power rating (70 ℃) (W) Resistance range (mΩ) Resistance tolerance (%) ERJMS4S (2512) 3 1, 2, 3, 4 F : ±1 ERJMS4H (2512) 3 2 5, 6 7, 8, 9, 10 ERJMB1S (1020) 2 1, 2, 3, 4, 5 T.C.R. (×10-6/K) ✽ Please contact us when resistors of irregular series are needed. Power Derating Curve than terminal temperature upper limit value of the rated table, please reduce the rated power according to the Power Derating Curve shown in the figure on the right. ＜Supplemented＞ In the case of the temperature measurement of the terminal portion of the resistor, Please perform under the following conditions. 1）Terminal temperature measurement, please apply the temperature of the higher of either the left or right electrode upper surface of the resistor. 2）Please measure the temperature of the resistor in the land pattern 120 Rated Load (%) If the terminal temperature of the resistor is more 100 -65 ℃ 100 ℃ 130 ℃ 80 60 ERJMS4H (7 to 10 mΩ) 40 20 0 170 ℃ -80 -40 0 40 80 120 160 200 Terminal Temperature (°C) printed of circuit board and plan to use by real conditions. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 1-Mar-20 PDF
Документация на ERJMB1SF2M0U 

Series catalog

Дата модификации: 19.05.2021

Размер: 850.3 Кб

8 стр.

    Товары серии ERJMB1

    Наименование i Упаковка Сопротивление
    ERJMB1SF2M0U (PAN)
     
    ERJMB1SF3M0U (PAN)
     
    ERJMB1SF5M0U (PAN)
     
    		1 шт