Серия алюминиевых конденсаторов SEK_OSCON

Panasonic Industrial Europe GmbH

Общие характеристики

 Раздел Алюминиевые конденсаторы
Допуск по ёмкости
Температура рабочая
Срок службы
Способ монтажа

Документация на серию SEK_OSCON

2019 Products Catalog Conductive Polymer Aluminum Solid Capacitors PDF
Документация на семейство OSCON 

Products catalog

Дата модификации: 28.01.2019

Размер: 1.3 Мб

48 стр.

Conductive Polymer Aluminum Solid Capacitors Radial Lead Type Series : SEK Features ● High voltage (50 V.DC max.) Halogen free ● RoHS compliance, ● 125 °C 1000 h Specifications Size code Category temperature range Rated voltage range Rated capacitance range Capacitance tolerance Leakage current Dissipation factor (tan d) Endurance Damp heat (Steady State) C6 E12 –55 °C to +125 °C 25 V.DC to 50 V.DC 22 μF to 82 μF 33 μF to 120 μF 68 μF to 270 μF ±20 % (120 Hz / + 20 °C) Please see the attached characteristics list Please see the attached characteristics list +125 °C, 1000 h, rated voltage applied Capacitance change Within ±20 % of the initial value tan d < 200 % of the initial limit DC leakage current Within the initial limit +60 °C, 90 % to 95 %, 1000 h, No-applied voltage Capacitance change Within ±20 % of the initial value tan d < 150 % of the initial limit DC leakage current Within the initial limit (after voltage processing) Marking E7 F13 120 μF to 470 μF Dimensions (not to scale) Polarity marking (−) Lot. No. Unit : mm Series – 15 min. 4 min. 19 min. L max. R. Capacitance R. Voltage + F fD±0.5 fd±0.05 ✽ Externals of figure are the reference. Size fD±0.5 L max. F±0.5 fd±0.05 code C6 6.3 6.0 2.5 0.5 E7 8.0 7.0 3.5 0.5 E12 8.0 12.0 3.5 0.6 F13 10.0 13.0 5.0 0.6 Characteristics list Rated Rated Series voltage capacitance (V.DC) (μF) 25 SEK 35 50 82 120 270 470 47 82 180 330 22 33 68 120 Case size (mm) fD L Size code 6.3 8.0 8.0 10.0 6.3 8.0 8.0 10.0 6.3 8.0 8.0 10.0 6.0 7.0 12.0 13.0 6.0 7.0 12.0 13.0 6.0 7.0 12.0 13.0 C6 E7 E12 F13 C6 E7 E12 F13 C6 E7 E12 F13 Ripple ✽1 current (mAr.m.s.) 960 1010 1470 1590 930 960 1260 1390 820 850 1200 1350 Specifications Allowable ✽1 ESR ✽2 ripple current tan d ✽3 (mΩ max.) (mAr.m.s.) 3060 25 0.12 3200 24 0.12 4650 16 0.12 5000 14 0.12 2950 27 0.12 3060 25 0.12 4000 20 0.12 4400 18 0.12 2600 35 0.12 2700 35 0.12 3800 25 0.12 4300 20 0.12 LC ✽4 (μA) Part number 410 600 1350 2350 329 574 1260 2310 220 330 680 1200 25SEK82M 25SEK120M 25SEK270M 25SEK470M 35SEK47M 35SEK82M 35SEK180M 35SEK330M 50SEK22M 50SEK33M 50SEK68M 50SEK120M ✽1 Ripple current (100 kHz/ +105 °C < Tx < +125 °C) /Allowable ripple current (100 kHz/ Tx < +105 °C), ✽2 ESR (100 kHz to 300 kHz/+20 °C) ✽3 tan d (120 Hz/+20 °C) ✽4 After 2 minutes ◆ Please refer to each page in this catarog for “Flow conditions” and “Taping specifications”. Frequency correction factor for ripple current Frequency Coefficient 120 Hz < f < 1 kHz 0.05 1 kHz < f < 10 kHz 0.3 10 kHz < f < 100 kHz 0.7 100 kHz < f < 500 kHz 1 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 00 Oct. 2017 PDF
Документация на серию SEK_OSCON 

OS-CON_SEK_New_e_171030.ai

Дата модификации: 23.10.2017

Размер: 44.7 Кб

1 стр.

    Товары серии SEK_OSCON

    Наименование i Упаковка Ёмкость Напряжение Диаметр Высота Шаг ESR Ток пульсаций НЧ Размер
    25SEK120M (PAN)
     
    		200 шт 8×8×7 мм
    25SEK270M (PAN)
     
    		200 шт 8×8×12 мм
    25SEK470M (PAN)
     
    		200 шт 10×10×13 мм
    25SEK82M (PAN)
     
    		500 шт 6.3×6.3×6 мм
    35SEK180M (PAN)
     
    		200 шт 8×8×12 мм
    35SEK330M (PAN)
     
    		200 шт 10×10×13 мм
    35SEK47M (PAN)
     
    		500 шт 6.3×6.3×6 мм
    35SEK82M (PAN)
     
    		200 шт 8×8×7 мм
    50SEK120M (PAN)
     
    		200 шт 10×10×13 мм
    50SEK22M (PAN)
     
    		500 шт 6.3×6.3×6 мм
    50SEK33M (PAN)
     
    		200 шт 8×8×7 мм
    50SEK68M (PAN)
     
    		200 шт 8×8×12 мм