Серия алюминиевых конденсаторов TCU_SMD

Panasonic Industrial Europe GmbH

Общие характеристики

 Раздел Алюминиевые конденсаторы
Допуск по ёмкости
Температура рабочая
Срок службы
Высота корпуса
Способ монтажа

Документация на серию TCU_SMD

Aluminum Electrolytic Capacitors (SMD Type) Surface Mount Type Series : TCU Type : V High temperature Lead-Free reflow Features ● Miniaturization (20 % to 40 % less than TP series) 3000 h at 125 °C ● Added ESR specification after the endurance test ● Vibration-proof product is available upon request ● RoHS directive compliant ● Endurance: Specifications Category temp. range Rated voltage range Nominal cap. range Capacitance tolerance DC Leakage current Dissipation factor (tan d) Endurance Shelf life Resistance to soldering heat AEC-Q200 –40 °C to +125 °C 10 V.DC to 35 V.DC 220 µF to 680 µF ±20 % (120 Hz/+20 °C) I < 0.01 CV (µA) After 2 minutes Please see the attached characteristics list After applying rated working voltage for 3000 hours at +125 °C±2 °C and then being stabilized at +20 °C, Capacitors shall meet the following limits. Capacitance change ±30 % of initial measured value tan d < 300 % of initial specified value DC leakage current < initial specified value Size code ESR after F G Endurance Initial (+20 °C) 0.2 0.15 (Ω/100kHz) After 2000 h (-40 °C) 9 7 After storage for 1000 hours at +125 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance (With voltage treatment) After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits. Capacitance change ±10 % of initial measured value tan d < initial specified value DC leakage current < initial specified value AEC-Q200 compliant Frequency correction factor for ripple current Frequency (Hz) 120 1k 10 k 100 k to Correction factor 0.65 0.85 0.95 1.00 0.3 max. 330 A TC Series identification (P) B±0.2 Capacitance (µF) H 0D±0.5 Negative polarity marking (–) A±0.2 – + L (I) Example : 10 V.DC 330 µF Marking color : BLACK (I) Dimensions (not to scale) K Marking W Pressure Relief (010 and larger) ( ) Reference size Rated voltage Mark (Unit : mm) Lot number R. Voltage (V.DC) Code 10 16 25 35 A C E V Size 0D code F 8.0 G L 10.2±0.3 A, B H I W P K 8.3 10.0max. 3.4 0.90±0.2 3.1 0.70±0.20 10.0 10.2±0.3 10.3 12.0max. 3.5 0.90±0.2 4.6 0.70±0.20 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 00 Mar. 2016 PDF
Документация на серию TCU_SMD 

N_AEC_V-TCU_E.indd

Дата модификации: 27.03.2019

Размер: 77.2 Кб

3 стр.

    Товары серии TCU_SMD

    Наименование i Упаковка Ёмкость Напряжение Диаметр ESR Ток пульсаций НЧ Размер
    EEETC1A331UP (PAN)
     
    		500 шт 8×8×8.3 мм
    EEETC1A471UP (PAN)
     
    		500 шт 8×8×8.3 мм
    EEETC1A561UP (PAN)
     
    		500 шт 8×8×8.3 мм
    EEETC1A681UP (PAN)
     
    		500 шт 10×10×10.3 мм
    EEETC1C331UP (PAN)
     
    		500 шт 8×8×8.3 мм
    EEETC1C391UP (PAN)
     
    		500 шт 8×8×8.3 мм
    EEETC1C681UP (PAN)
     
    		500 шт 10×10×10.3 мм
    EEETC1E221UP (PAN)
     
    		500 шт 8×8×8.3 мм
    EEETC1E331UP (PAN)
     
    		500 шт 8×8×8.3 мм
    EEETC1E471UP (PAN)
     
    		500 шт 10×10×10.3 мм
    EEETC1V221UP (PAN)
     
    		500 шт 8×8×8.3 мм
    EEETC1V331UP (PAN)
     
    		в ленте 500 шт 10×10×10.3 мм
    EEETC1V391UP (PAN)
     
    		500 шт 10×10×10.3 мм