Серия танталовых конденсаторов TEH

Общие характеристики

	Раздел	Танталовые конденсаторы
	Допуск по ёмкости
	Температура рабочая

Документация на серию TEH

Tantalum Solid Electrolytic Capacitors/TEH Surface Mount Type Series: TEH ■ Japan China Features High moisture resistance at +60°C, 90 to 95 % R,H ■ Specifications Category temp. range -55 to +125°C 4 to 35 V .DC Rated W.V. Range I < = 0.01 CV or 0.5(µA) after 2 minutes applocation of rated working voltage at 20°C (whichever, greater) Please see the attached standard products list Cap.(µF) 0.1 to 0.22 0.33 to 0.68 Z(Ω) max. 60 15 Resistance to Soldering Heat Moisture Resistance Endurance Temperature Cycle 1.0 to 6.8 8 Polarity bar (+side) ■ Manufacture’s identification 47 to 100 1 W.V. code W.V. (V) code 4 6.3 10 16 20 25 35 G J A C D E V Dimensions in mm (not to scale) P Capacitance 470000 pF= 0.47 µF 4700000 pF= 4.7 µF L P w1 Cap. code ● Size X,C,D Cap. Code(same as size Y) ManufactureÕs identification Polarity Bar(+side) W2 474 475 (- ) ( +) Capacitance code Cap. code W.V.code (100kHz/+20°C) The capacitor shall withstand dipping into solder for 10±1 seconds at +260 ±5°C After 1000 hours exposure at +60 °C and 90 to 95 % R.H. without load, the capacitor shall meet the following limits. Capacitance change ±10% of initial measured value < D.F. = initial specified value < DC leakage current = 200 % of initial specified value After 2000 hours application of rated DC working voltage at +85°C or derated voltage at +125°C, the capacitor shall meet the following limits. Capacitance change ±10% of initial measured value < D.F. = initial specified value < DC leakage current = 125 % of initial specified value After 100 cycles at -55°C /+125°C, the capacitor shall meet the following limits. Capacitance change ±5 % of initial measured value < D.F. = initial specified value < DC leakage current = 125 % of initial specified value Marking ● Size Y 10 to 33 3 H Impedance ■ 0.15 to 100 µ F ±20 % (120Hz/+20°C) W2 Nominal Cap. Range Capacitance Tolerance DC Leakage Current Dissipation Factor W.V.(V) ❉ (for 6.3W.V. abbreviated to 6 V) EIA code Size code L ±0.2 W1±0.2 W2±0.1 H±0.2 P±0.3 1.6 3216 Y 0.8 3.2 1.2 1.6 3528 2.8 0.8 2.2 3.5 X 1.9 6032 1.3 3.2 2.5 C 6.0 2.2 7343 1.3 4.3 2.8 2.4 D 7.3 ❉ Each case side has different configuration of terminal. ■ Case size W.V(V.DC) 4(0G) 6.3(0J) 10(1A) 16(1C) 20(1D) 25(1E) 35(1V) Cap.(µF) Standard Miniature Standard Miniature Standard Miniature Standard Miniature Standard Miniature Standard Miniature Standard Miniature 0.15 to 0.33 Y Y 0.47 (474) X Y Y 0.68 (684) Y X Y 1.0 (105) X Y Y X 1.5 (155) C Y X Y Y X 2.2 (225) X C X Y X C 3.3 (335) D Y X Y C Y X X Y X 4.7 (475) C Y D X Y C X Y 6.8 (685) C D X C X X Y X C D 10 (106) X C D X Y C X C 15 (156) D C C D X 22 (226) C D C X D C D 33 (336) C D D 47 (476) D C 68 (686) D D 100 (107) D Note : 1. ( )shows W.V. and capacitance code. 2. When selecting W.V. see the page 210. 3. We would like to recommend current sizes in above table for new design, but conventional case size is available on request. 4. Other rating upon request (voltage, capacitance, tolerance, size) Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and /or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consulation without fail. Ñ EE223 Ñ  PDF

Документация на ECSH0JC156R 

EE-E223 Ta-TEH ”dŠl.p65

Дата модификации: 07.03.2001

Размер: 21.1 Кб

1 стр.

• найти TEH.pdf

Товары серии TEH

Наименование	i	Упаковка	Ёмкость	Напряжение	Код корпуса производителя	Способ монтажа	Ток утечки	Размер
ECSH0JC156R (PAN)								6×3.2×2.5 мм
ECSH0JC226R (PAN)								6×3.2×2.5 мм
ECSH0JC336R (PAN)								6×3.2×2.5 мм
ECSH0JY335R (PAN)								3.2×1.6×1.6 мм
ECSH1AX475R (PAN)		в ленте 2000 шт			—			3.5×2.8×1.9 мм
ECSH1AY225R (PAN)								3.2×1.6×1.6 мм
ECSH1CC106R (PAN)								6×3.2×2.5 мм
ECSH1CD226R (PAN)						—		7.3×4.3×2.8 мм
ECSH1CY105R (PAN)								3.2×1.6×1.6 мм
ECSH1EX155R (PAN)					—			3.5×2.8×1.9 мм