Серия алюминиевых конденсаторов TP-V_SMD

Panasonic Industrial Europe GmbH

Общие характеристики

 Раздел Алюминиевые конденсаторы
Допуск по ёмкости
Температура рабочая
Способ монтажа

Документация на серию TP-V_SMD

Aluminum Electrolytic Capacitors Surface Mount Type TP series High temperature Lead-Free reflow (suffix : A✽) Features ● ● ● ● ● ● Endurance : 125 ℃ 3000 h (D8 size : 2000 h) Lower ESR at Low temperature after endurance Automotive Vibration-proof product (30G guaranteed) is available upon request AEC-Q200 compliant RoHS compliant Specifications Category temp. range Rated voltage range Capacitance range Capacitance tolerance Leakage current Dissipation factor (tan δ) Endurance Shelf life Resistance to soldering heat –40 ℃ to +125 ℃ 10 V to 35 V 47 μF to 470 μF ±20 % (120 Hz / +20 ℃) I ≦ 0.01 CV (μA) After 2 minutes Please see the attached characteristics list After the life test with DC rated working voltage at +125 ℃ ± 2 ℃ for 3000 hours (D8 : 2000 h) the capacitors shall meet the limits specified below. Capacitance change Within ±30 % of the initial value Dissipation factor（tan δ) ≦ 300 % of the initial limit Leakage current Within the initial limit ESR after Size code D8 F G endurance Initial (20 ℃) 0.45 0.20 0.15 After 2000 h (−40 ℃) 40 4.5 3.5 (Ω/100 kHz) After storage for 1000 hours at +125 ℃ ± 2 ℃ with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in endurance. (With voltage treatment) After reflow soldering and then being stabilized at +20 ℃, capacitors shall meet the following limits. Capacitance change Within ±10 % of the initial value Dissipation factor（tan δ) Within the initial limit Leakage current Within the initial limit Frequency correction factor for ripple current Frequency (Hz) Correction factor 120 0.65 10 k 0.95 100 k to 1.00 Dimensions Example : 10 V 220 μF Marking color : BLACK A±0.2 K 0.3 max. （P） L Mark for Lead-Free products (Black dot) （I） Series identification H 220 A TP øD±0.5 Capacitance (μF) B±0.2 Negative polarity marking (–) W Pressure Relief (ø10 and larger) （）Reference size Rated voltage code Lot number R.voltage code Unit：V A 10 E 25 C 16 V 35 （I） Marking 1k 0.85 øD L A, B H I W D8 6.3 7.7±0.3 6.6 7.8 max. 2.6 0.65±0.1 1.8 0.35 F 8.0 10.2±0.3 8.3 10.0 max. 3.4 0.90±0.2 3.1 0.70±0.2 10.0 10.2±0.3 10.3 12.0 max. 3.5 0.90±0.2 4.6 0.70±0.2 G P Unit：mm Size code K +0.15 ー0.20 ・The dimensions of the vibration-proof products, please refer to the page of the mounting specification. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 06-Dec-19 PDF
Документация на EEETP1A221AV 

Series catalog

Дата модификации: 24.09.2021

Размер: 598.6 Кб

10 стр.

    Товары серии TP-V_SMD

    Наименование i Упаковка Ёмкость Напряжение Срок службы Диаметр Высота ESR Ток пульсаций НЧ Размер
    EEETP1A221AV (PAN)
     
     
    		 500 шт 8×8×8.3 мм
    EEETP1A331AV (PAN)
     
     
    		 500 шт 10×10×10.3 мм
    EEETP1A471AV (PAN)
     
     
    		 500 шт 10×10×10.3 мм
    EEETP1C101AV (PAN)
     
     
    		 500 шт 8×8×8.3 мм
    EEETP1C221AV (PAN)
     
     
    		 500 шт 8×8×8.3 мм
    EEETP1C331AV (PAN)
     
     
    		 500 шт 10×10×10.3 мм
    EEETP1C471AV (PAN)
     
     
    		 500 шт 10×10×10.3 мм
    EEETP1E101AV (PAN)
     
     
    		 500 шт 8×8×8.3 мм
    EEETP1E221AV (PAN)
     
     
    		 500 шт 10×10×10.3 мм
    EEETP1E331AV (PAN)
     
     
    		 500 шт 10×10×10.3 мм
    EEETP1V101AV (PAN)
     
     
    		 500 шт 8×8×8.3 мм
    EEETP1V221AV (PAN)
     
     
    		 500 шт 10×10×10.3 мм
    EEETP1V221FV (PAN)
     
     
    		 — —
    EEETP1V470AV (PAN)
     
     
    		 500 шт 8×8×8.3 мм
    EEETPA331UAV (PAN)
     
     
    		 500 шт 8×8×8.3 мм
    EEETPC101XAV (PAN)
     
     
    		 900 шт 6.3×6.3×6.6 мм
    EEETPV470XAV (PAN)
     
     
    		 900 шт 6.3×6.3×6.6 мм