Серия DC-DC модульных преобразователей P14NG-XXXXE

Общие характеристики

Раздел DC-DC модульные преобразователи
Монтаж
Выходная мощность
Количество каналов
Возможности
Комплекс защит
Уровень пульсаций
КПД
Напряжение изоляции вход-выход
Размер 21.85×9.2×11.1 мм
Рабочая температура

Документация на серию P14NG-XXXXE

PC14NG-xxxxE/Z4:1LF PMRBW-SERIES Rev.05-2010  3 Watt  4:1 Wide Input  Single and Dual Reg. Output  1.5 kV DC I/O Isolation  SIP8 case  On/Off Control  Contin. Short Circuit Protection Mainzer Straße 151–153 D-55299 Nackenheim Tel. +49 6135 7026-0 Fax: +49 6135 931070 www.peak-electronics.de peak@peak-electronics.de The PMRBW series is a family of cost effective 3 W single and dual output DC/DC converters with an control Pin. These converters are in an ultra miniature SIP8 plastic case. Devices are encapsulated using flame retardant resin. High performance features include continuous / long time short circuit protection with automatic restart and tight line / load regulation. High performance features include high efficiency operation and output voltage accuracy of ±1% maximum. PMRBW-Series is a good substitution of traditional DC/DC converters 3W in DIP24 package. All specifications typical at Ta=25°C, nominal input voltage and full load unless otherwise specified Input Specifications Voltage Range Input Filter Input Reflected Ripple Current¹ Start up time (Nominal Vin and constant resistive load) 4:1 Wide Input (see table) Capacitors 20 mA pk-pk 30mS, typ. Output Specifications Voltage Accuracy Short Circuit Protection Line Regulation Load Regulation Cross Regulation (Dual Output) Ripple and Noise (20Mhz bandwidth) Temperature Coefficient Transient Recovery Time² Transient Response Deviation² ± 1% Indefinite (Automatic Recovery) ± 0.2%, max. ± 1%, max. ± 5% 30 mV pk-pk ± 0.02% / °C 250us, typ. ± 3%, max. General Specifications I/O Isolation Voltage (3 sec.) I/O Isolation Capacity I/O Isolation Resistance Switching Frequency Humidity Reliability Calculated MTBF (MIL-HDBK-217F) 1500 VDC 200 pF, max. 1000 MOhm 100 kHz, min. 95% rel H > 1.7 Mhrs Physical Specifications Case Material Potting Material Weight Non Conductive Black Plastic Silicon (UL94V-0 rated) ~ 4.8g, typ. Environment Specifications Operating Temperature Maximum Case Temperature Storage Temperature Cooling RoHS Conform -40 to +71°C (ambient) 100°C -40 to +125°C Free Air Convection Soldering 260°C, max. (1.5mm from case 10s.) PMRBW-Series – PC14NG-xxxxE/Z4:1LF – Single / Dual Output – SIP8 - Plastic Case Specification can change without a notice – We accept no liability for any inaccuracy or printing errors. Page 1/3 PDF
Документация на серию P14NG-XXXXE 

PC14NG_4-1_05_10

Дата модификации: 25.05.2010

Размер: 133 Кб

3 стр.

P(C)14NG-xxxxE/Z2:1LF PMB-SERIES Rev.11-2008  3 Watt  2:1 Wide Input  Single and Dual Reg. Output  1.5 kV DC I/O Isolation  SIP8 case  On/Off Control (optional)  Contin. Short Circuit Protection Mainzer Straße 151–153 D-55299 Nackenheim Tel. +49 6135 7026-0 Fax: +49 6135 931070 www.peak-electronics.de peak@peak-electronics.de The PMB series is a family of cost effective 1, 2 and 3 W single and dual output DC/DC converters with an optional control Pin. These converters are in an ultra miniature SIP8 or DIP16 plastic or metal case. Devices are encapsulated using flame retardant resin. High performance features include continuous / long time short circuit protection with automatic restart and tight line / load regulation. High performance features include high efficiency operation and output voltage accuracy of ±1-2% maximum. PMBSeries is a good substitution of traditional DC/DC converters 3W in DIP24 package. All specifications typical at Ta=25°C, nominal input voltage and full load unless otherwise specified Input Specifications Voltage Range Input Filter Input Reflected Ripple Current¹ Start up time (Nominal Vin and constant resistive load) 2:1 Wide Input (see table) Capacitors 35 mA pk-pk 20mS, typ. Output Specifications Voltage Accuracy Short Circuit Protection Line Regulation Load Regulation (25% - 100%) Cross Regulation (Dual Output) Ripple and Noise (20Mhz bandwidth) Temperature Coefficient Transient Recovery Time² Transient Response Deviation² ± 1% Indefinite (Automatic Recovery) ± 0.5%, max. ± 1%, max. ± 5% 75 mV pk-pk ± 0.02% / °C 300us, typ. ± 3%, max. General Specifications I/O Isolation Voltage (3 sec.) I/O Isolation Capacity I/O Isolation Resistance Switching Frequency Humidity Reliability Calculated MTBF (MIL-HDBK-217F) 1500 VDC 680 pF, max. 1000 MOhm 100 kHz, min. 95% rel H > 2.465 Mhrs Physical Specifications Case Material Potting Material Weight Non Conductive Black Plastic Epoxy (UL94V-0 rated) ~ 4.8g, typ. Environment Specifications Operating Temperature Maximum Case Temperature Storage Temperature Cooling RoHS Conform -40 to +71°C (ambient) 100°C -40 to +125°C Free Air Convection Soldering 260°C, max. (1.5mm from case 10s.) PMB-Series – P(C)14NG-xxxxE/Z2:1LF – Single / Dual Output – SIP8 - Plastic Case Specification can change without a notice – We accept no liability for any inaccuracy or printing errors. Page 1/3 PDF
Документация на серию P14NG-XXXXE 

P_C_14NG_11_2008

Дата модификации: 28.11.2008

Размер: 134.5 Кб

3 стр.

    Товары серии P14NG-XXXXE

    Наименование i Упаковка U вх Выход U вх ном. U1 I1
    PC14NG-2405E4:1LF (PEAK)
     
    в линейках 22 шт
    PC14NG-2412E4:1LF (PEAK)
     
    1 шт
    PC14NG-4805E4:1LF (PEAK)
     
    в линейках 22 шт
    PC14NG-483R3E4:1LF (PEAK)
     
    в линейках 22 шт