Серия DC-DC модульных преобразователей PC14NG-XXXXZ41

Общие характеристики

Раздел DC-DC модульные преобразователи
Монтаж
Выходная мощность
Возможности
Комплекс защит
Уровень пульсаций
Напряжение изоляции вход-выход
Размер 21.85×9.2×11.1 мм
Рабочая температура

Документация на серию PC14NG-XXXXZ41

PC14NG-xxxxE/Z4:1LF PMRBW-SERIES Rev.05-2010  3 Watt  4:1 Wide Input  Single and Dual Reg. Output  1.5 kV DC I/O Isolation  SIP8 case  On/Off Control  Contin. Short Circuit Protection Mainzer Straße 151–153 D-55299 Nackenheim Tel. +49 6135 7026-0 Fax: +49 6135 931070 www.peak-electronics.de peak@peak-electronics.de The PMRBW series is a family of cost effective 3 W single and dual output DC/DC converters with an control Pin. These converters are in an ultra miniature SIP8 plastic case. Devices are encapsulated using flame retardant resin. High performance features include continuous / long time short circuit protection with automatic restart and tight line / load regulation. High performance features include high efficiency operation and output voltage accuracy of ±1% maximum. PMRBW-Series is a good substitution of traditional DC/DC converters 3W in DIP24 package. All specifications typical at Ta=25°C, nominal input voltage and full load unless otherwise specified Input Specifications Voltage Range Input Filter Input Reflected Ripple Current¹ Start up time (Nominal Vin and constant resistive load) 4:1 Wide Input (see table) Capacitors 20 mA pk-pk 30mS, typ. Output Specifications Voltage Accuracy Short Circuit Protection Line Regulation Load Regulation Cross Regulation (Dual Output) Ripple and Noise (20Mhz bandwidth) Temperature Coefficient Transient Recovery Time² Transient Response Deviation² ± 1% Indefinite (Automatic Recovery) ± 0.2%, max. ± 1%, max. ± 5% 30 mV pk-pk ± 0.02% / °C 250us, typ. ± 3%, max. General Specifications I/O Isolation Voltage (3 sec.) I/O Isolation Capacity I/O Isolation Resistance Switching Frequency Humidity Reliability Calculated MTBF (MIL-HDBK-217F) 1500 VDC 200 pF, max. 1000 MOhm 100 kHz, min. 95% rel H > 1.7 Mhrs Physical Specifications Case Material Potting Material Weight Non Conductive Black Plastic Silicon (UL94V-0 rated) ~ 4.8g, typ. Environment Specifications Operating Temperature Maximum Case Temperature Storage Temperature Cooling RoHS Conform -40 to +71°C (ambient) 100°C -40 to +125°C Free Air Convection Soldering 260°C, max. (1.5mm from case 10s.) PMRBW-Series – PC14NG-xxxxE/Z4:1LF – Single / Dual Output – SIP8 - Plastic Case Specification can change without a notice – We accept no liability for any inaccuracy or printing errors. Page 1/3 PDF
Документация на серию PC14NG-XXXXZ41 

PC14NG_4-1_05_10

Дата модификации: 25.05.2010

Размер: 133 Кб

3 стр.

PC14NG-xxxxE/Z4:1LF PMRBW-SERIES Rev.05-2010  3 Watt  4:1 Wide Input  Single and Dual Reg. Output  1.5 kV DC I/O Isolation  SIP8 case  On/Off Control  Contin. Short Circuit Protection Mainzer Straße 151–153 D-55299 Nackenheim Tel. +49 6135 7026-0 Fax: +49 6135 931070 www.peak-electronics.de peak@peak-electronics.de The PMRBW series is a family of cost effective 3 W single and dual output DC/DC converters with an control Pin. These converters are in an ultra miniature SIP8 plastic case. Devices are encapsulated using flame retardant resin. High performance features include continuous / long time short circuit protection with automatic restart and tight line / load regulation. High performance features include high efficiency operation and output voltage accuracy of ±1% maximum. PMRBW-Series is a good substitution of traditional DC/DC converters 3W in DIP24 package. All specifications typical at Ta=25°C, nominal input voltage and full load unless otherwise specified Input Specifications Voltage Range Input Filter Input Reflected Ripple Current¹ Start up time (Nominal Vin and constant resistive load) 4:1 Wide Input (see table) Capacitors 20 mA pk-pk 30mS, typ. Output Specifications Voltage Accuracy Short Circuit Protection Line Regulation Load Regulation Cross Regulation (Dual Output) Ripple and Noise (20Mhz bandwidth) Temperature Coefficient Transient Recovery Time² Transient Response Deviation² ± 1% Indefinite (Automatic Recovery) ± 0.2%, max. ± 1%, max. ± 5% 30 mV pk-pk ± 0.02% / °C 250us, typ. ± 3%, max. General Specifications I/O Isolation Voltage (3 sec.) I/O Isolation Capacity I/O Isolation Resistance Switching Frequency Humidity Reliability Calculated MTBF (MIL-HDBK-217F) 1500 VDC 200 pF, max. 1000 MOhm 100 kHz, min. 95% rel H > 1.7 Mhrs Physical Specifications Case Material Potting Material Weight Non Conductive Black Plastic Silicon (UL94V-0 rated) ~ 4.8g, typ. Environment Specifications Operating Temperature Maximum Case Temperature Storage Temperature Cooling RoHS Conform -40 to +71°C (ambient) 100°C -40 to +125°C Free Air Convection Soldering 260°C, max. (1.5mm from case 10s.) PMRBW-Series – PC14NG-xxxxE/Z4:1LF – Single / Dual Output – SIP8 - Plastic Case Specification can change without a notice – We accept no liability for any inaccuracy or printing errors. Page 1/3 PDF
Документация на серию P14NG-XXXXE 

PC14NG_4-1_05_10

Дата модификации: 25.05.2010

Размер: 133 Кб

3 стр.

    Товары серии PC14NG-XXXXZ41

    Наименование i Упаковка Каналов U вх Выход U вх ном. U1 I1 КПД U2 I2
    PC14NG-2415Z4:1LF (PEAK)
     
    1 шт
    PC14NG-243R3E4:1LF (PEAK)
     
    в линейках 22 шт
    PC14NG-4812Z4:1LF (PEAK) DC-DC модульный преобразователь - Монтаж: на плату, SIP8; P вых: 3 Вт; #: 2; U вх: 18..... 1 шт
    PC14NG-4815Z4:1LF (PEAK)
     
    1 шт