Серия DC-DC модульных преобразователей PSD-1A

Общие характеристики

Раздел DC-DC модульные преобразователи
Монтаж
Выходная мощность
Количество каналов
Возможности
Комплекс защит
Уровень пульсаций
Схема параллельного включения
Напряжение изоляции вход-выход
Сертификаты медицинские
Рабочая температура

Документация на серию PSD-1A

PSD1-A-xxxxE PSD-SERIES Rev.01-2016  1 Watt  Unregulated Ready for UL*  Single Output  SMD Case  1.5 kV - 3 kV DC I/O Isolation  Continuous Short Circuit Prot.  2 Years Warranty (Date Code) Mainzer Straße 151–153 D-55299 Nackenheim Tel. +49 6135 7026 -0 Fax: +49 6135 931070 www.peak-electronics.de peak@peak-electronics.de The PSD1-A series is a family of cost effective 1 W single output DC/DC converters. These converters are in an ultra miniature SMD 5-pin case. Devices are encapsulated. High performance features: 1500VDC and 3000VDC (for the most types) input/output isolation, industrial standard pinout, high power density. No heatsink required. *most 1.5kV devices are ready for UL. Please ask for MOQ if you need Certification. All specifications typical at Ta=25°C, nominal input voltage and full load unless otherwise specified Input Specifications Output Specifications Voltage Range ±10% Current max. (See table) Line regulation 7 – 25mA (See table) Load regulation ( 10% to 100% ) See Table Capacitors Ripple & noise (20 MHz bandwidth) 60 mV pk-pk Filter 15mA pk-pk (@12uH) Efficiency Up to 80% 1500VDC (60 sec) 3000VDC Isolation I/O Capacitance 1000 MΩ, min. Switching Frequency MTBF 100 kHz 95% (rel.) >3500 Khrs (Calculated MIL-HDBK-217F) Pin Welding Temperature Reflow Soldering 300°C, max. 245°C, peak (217°C ≤60s) Radiated Emissions* CISPR22/EN55022 Class B Conducted Emissions* CISPR22/EN55022 Class B (contact ±8KV) IEC-61000-4-2 (1.5% for 3.3Vout) ±0.03%/°C 220uF (Test: min. Vin + const. load) Short Circuit Protection Continuous (exceptions see Table) Environment / Physical Specifications Operation Temp. Case Temp. Rise -40°C to 105°C 25°C (nominal Input and full load) Storage -55°C to 125°C Cooling Nature / Free Air Case Material Plastic (UL94V-0 rated) Potting Epoxy (UL94V-0 rated) Weight EMC Specifications ESD ±1.2% (standard) (add “H30”) 20 pF Isolation I/O Resistance Humidity (See table) (per 1% Vin change) Temperature coefficient Capacitor load General Specifications Isolation I/O See App Note 52 – 404mA Current No-Load Reflected Ripple Current Voltage accuracy Pref. Criteria B *Input filter components are required to meet (see App Note) PSD1-Series – PSD1-A-xxxxE – Single Output – SMD - Plastic Case Specification can change without a notice – We accept no liability for any inaccuracy or printing errors. Page 1/4 ~1.6 g PDF
Документация на PSD1-A-0524E 

PSD1-Series

Дата модификации: 11.01.2016

Размер: 381.6 Кб

4 стр.

PSD1-A-xxxxE PSD-SERIES Rev.06-2015/2  1 Watt  Unregulated Ready for UL*  Single Output  SMD Case  1.5 kV - 3 kV DC I/O Isolation  Continuous Short Circuit Prot.  2 Years Warranty (Date Code) Mainzer Straße 151–153 D-55299 Nackenheim Tel. +49 6135 7026 -0 Fax: +49 6135 931070 www.peak-electronics.de peak@peak-electronics.de The PSD1-A series is a family of cost effective 1 W single output DC/DC converters. These converters are in an ultra miniature SMD 5-pin case. Devices are encapsulated. High performance features: 1500VDC and 3000VDC (for the most types) input/output isolation, industrial standard pinout, high power density. No heatsink required. *most 1.5kV devices are ready for UL. Please ask for MOQ if you need Certification. All specifications typical at Ta=25°C, nominal input voltage and full load unless otherwise specified Input Specifications Output Specifications Voltage Range ±10% Current max. (See table) Line regulation 7 – 25mA (See table) Load regulation ( 10% to 100% ) See Table Capacitors Ripple & noise (20 MHz bandwidth) 60 mV pk-pk Filter 15mA pk-pk (@12uH) Efficiency Up to 80% 1500VDC (60 sec) 3000VDC Isolation I/O Capacitance 1000 MΩ, min. Switching Frequency MTBF 100 kHz 95% (rel.) >3500 Khrs (Calculated MIL-HDBK-217F) Pin Welding Temperature Reflow Soldering 300°C, max. 245°C, peak (217°C ≤60s) Radiated Emissions* CISPR22/EN55022 Class B Conducted Emissions* CISPR22/EN55022 Class B (contact ±8KV) IEC-61000-4-2 (1.5% for 3.3Vout) ±0.03%/°C 220uF (Test: min. Vin + const. load) Short Circuit Protection Continuous (exceptions see Table) Environment / Physical Specifications Operation Temp. Case Temp. Rise -40°C to 105°C 25°C (nominal Input and full load) Storage -55°C to 125°C Cooling Nature / Free Air Case Material Plastic (UL94V-0 rated) Potting Epoxy (UL94V-0 rated) Weight EMC Specifications ESD ±1.2% (standard) (add “H30”) 20 pF Isolation I/O Resistance Humidity (See table) (per 1% Vin change) Temperature coefficient Capacitor load General Specifications Isolation I/O See App Note 52 – 404mA Current No-Load Reflected Ripple Current Voltage accuracy Pref. Criteria B *Input filter components are required to meet (see App Note) PSD1-Series – PSD1-A-xxxxE – Single Output – SMD - Plastic Case Specification can change without a notice – We accept no liability for any inaccuracy or printing errors. Page 1/4 ~1.6 g PDF
Документация на серию PSD-1A 

PSD1-Series

Дата модификации: 06.07.2015

Размер: 379.8 Кб

4 стр.

    Товары серии PSD-1A

    Наименование i Упаковка U вх Выход U вх ном. U1 I1 КПД Размер
    PSD1-A-0505E (PEAK) DC/DC конвертор: 1 Вт; корпус PCB SMD8; выход 5В @ 20-200 мА; вход: 4.5…5.5 [5] В; -40.... в линейках 38 шт 12.7×8.3×7.25 мм
    PSD1-A-0509E (PEAK) 38 шт 12.7×8.3×7.95 мм
    PSD1-A-0512E (PEAK) DC-DC модульный преобразователь - Монтаж: на плату, SMD8; P вых: 1 Вт; #: 1; U вх: 4.5.... в линейках 38 шт 12.7×8.3×7.25 мм
    PSD1-A-0515E (PEAK) в линейках 38 шт 12.7×8.3×7.95 мм
    PSD1-A-0524E (PEAK) 12.7×8.3×7.95 мм
    PSD1-A-053R3E (PEAK) 38 шт 12.7×8.3×7.95 мм
    PSD1-A-1205E (PEAK) DC-DC модульный преобразователь - Монтаж: на плату, SMD8; P вых: 1 Вт; #: 1; U вх: 11.8... в линейках 10 шт 12.7×8.3×7.25 мм
    PSD1-A-1209E (PEAK) 32 шт 12.7×8.3×7.95 мм
    PSD1-A-1212E (PEAK) в линейках 38 шт 12.7×8.3×7.95 мм
    PSD1-A-1215E (PEAK) 30 шт 12.7×8.3×7.95 мм
    PSD1-A-123R3E (PEAK) 38 шт 12.7×8.3×7.95 мм
    PSD1-A-1515E (PEAK)
    PSD1-A-2405E (PEAK) в линейках 38 шт 12.7×8.3×7.95 мм
    PSD1-A-2409E (PEAK) 38 шт 12.7×8.3×7.95 мм
    PSD1-A-2415E (PEAK) DC-DC модульный преобразователь - Монтаж: на плату, SMD8; P вых: 1 Вт; #: 1; U вх: 21.6... в линейках 38 шт 12.7×8.3×7.25 мм
    PSD1-A-2424E (PEAK) DC/DC конвертор: 1 Вт; корпус PCB SMD8; выход 24В @ 4-42 мА; вход: 21,6...26,4 [24] В; ... в линейках 38 шт 12.7×8.3×7.95 мм
    PSD1-A-3R305E (PEAK) в линейках 38 шт 12.7×8.3×7.95 мм
    PSD1-A-3R33R3E (PEAK) в линейках 18 шт 12.7×8.3×7.95 мм