Серия AC-DC сетевых преобразователей DG-15-S

POWERLD ENTERPRISES Co.,Ltd.

Общие характеристики

 Раздел AC-DC сетевые преобразователи
Выходная мощность (ном)
Конструктивное исполнение
Типы защиты перенапряжение, перегрузка, КЗ
Количество выходов
Тип управления выходом
Входное напряжение AC
Входное напряжение DC
Напряжение изоляции вход-выход
Напряжение изоляции вход-земля
Напряжение изоляции выход-земля
Шум
Размер 103.7×32×97.5 мм
Рабочая температура

Документация на серию DG-15-S

15Watts Single Output Industrial DIN Rail Power Supply DG-15-S Series Features: „ ¾ Universal AC input range(90~264Vac) ¾ High efficiency, long life and high reliability ¾ Output protections: OVP/OLP/SCP ¾ Wide operating ambient temp (-25℃~70℃) ¾ Can be installed on TS-35/7.5 or 35/15 ¾ 100% full load burn-in test ¾ PCB with conformal coating ¾ Suitable for critical applications ¾ Cooling by free air convection ¾ 3 years warranty SSSPPPEEECCCIIIFFFIIICCCAAATTTIIIO O ONNN MODEL OUTPUT INPUT PROTECTION ENVIRONMENT SAFETY &EMC Note 3 OTHERS DG-15-S12 DG-15-S24 DC Output 12V 24V Rated Current 1.25A 0.65A Current Range Note 1 0~1.25A 0~0.65A Ripple and Noise 10~70℃ ≤120mV ≤120mV Note 2 -25~10℃ ≤240mV ≤240mV Voltage ADJ. Range 12~14V 24~28V Voltage Accuracy ±1.0% Line Regulation ±0.5% Load Regulation ±1% Set-up Time <1.5S @230Vac Hold up Time ≥20mS @230Vac Temperature Coefficient ±0.03%/℃ Overshoot and Undershoot <5.0% Full load Full load Voltage Range 90Vac~264Vac, 127VDC-370VDC Frequency Range 47Hz~63Hz Efficiency ( Typical) 83% @230Vac input, full load AC Current (max.) <0.5A Inrush Current (Typical) 50A/230Vac Leakage Current Input—output: ≤0.25mA Over Load 1.5~2.0A, hiccup mode, auto recovery 0.7~1.0A, hiccup mode, auto recovery Over voltage 15.0~16.8V, Constant voltage, auto recovery 28.8~31.2V, Constant voltage, auto recovery 84.5% @230Vac input, full load Cold start Input—PE: ≤3.5mA (264Vac input, 63Hz) Short Circuit Long-term mode, auto recovery Operating amb. Temp. & Hum. -25℃~70℃; 20%~90%RH No condensing Storage Temp. & Hum. -40℃~85℃; 5%~95%RH Safety Standards UL60950, EN60950 Withstand Voltage Primary-Secondary: 3KVac/10mA; Primary-PE: 1.5KVac/10mA; Secondary-PE: 0.5KVac/10mA Isolation Resistance >10M ohms EMC Emission Compliance to EN55022, EN55024 Class B Harmonic Current Compliance to EN61000-3-2，CLASS A No condensing EMC Immunity Compliance to EN61000-4-2,3,4,5,6,11; heavy industry level MTBF (MIL-HDBK-217F) 590,000Hrs (25℃, Full load) Dimension (L*W*H) 103.7*32*97.5mm Packing 36pcs/CTN Cooling method Cooling by free air convection 1. All parameters NOT specially mentioned are measured at rated input, rated load and 25℃ of ambient temperature. NOTE 2. Measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1 uF & 10uF parallel capacitor. 3. The power supply is considered as a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies” on http://www.powerld.com.cn. www.powerld.com Tel:+86-755-86051514 Fax:+86-755-86051389 Email: tom@powerld.com Date:2017-06-07 1 PDF
Документация на DG-15-S12 

Microsoft Word - DG-15-S Series

Дата модификации: 07.06.2017

Размер: 487.3 Кб

6 стр.

    Товары серии DG-15-S

    Наименование i Упаковка Выход U1 I1 КПД
    DG-15-S12 (POWERLD)
     
     
    DG-15-S24 (POWERLD)