Серия аналогово цифровых преобразователей (АЦП) RS1430

Runic

Общие характеристики

 Раздел Аналогово Цифровые Преобразователи (АЦП)
Разрядность АЦП
Кол-во измерительных каналов
Частота преобразования
Тип аналого-цифрового преобразователя
Цифровой интерфейс
Конфигурация аналогового входа
Уровень сигнал/шум
Эффективная разрядность АЦП
Потребляемая мощность
Конфигурация источника опорного напряжения
Диапазон питающих напряжений аналоговой части
Диапазон рабочих температур
Корпус uSOP-8 MSOP8

Документация на серию RS1430

RS1430B 16 Bit, 400KSPS, 2.7V to 5.5V, Analog-to-Digital Converter 1 FEATURES 3 DESCRIPTIONS The RS1430B is a 16-bit, sampling, analog-to-digital (A/D) converter specified for a supply voltage range from 2.7V to 5.5V. It requires very little power, even when operating at the full data rate. At lower data rates, the high speed of the device enables it to spend most of its time in the power-down mode. For example, the average power dissipation is less than 162µ W at a 10kHz data rate. • 16 Bits No Missing Codes • Very Low Noise: 45 µ Vrms • Excellent Linearity: ±2LSB typ INL ±0.5LSB typ DNL ±4LSB typ Offset ±6LSB typ Gain Error • microPower: 13mW at 5V, 400KSPS 4.86mW at 2.7V, 300KSPS 1.62mW at 2.7V, 100KSPS 162µ W at 2.7V, 10KSPS • MSOP8 Packages • SPI Interface The RS1430B offers excellent linearity and very low noise and distortion. It also features a synchronous serial (SPI/SSI-compatible) interface and a pseudo-differential input. The reference voltage can be set to any level within the range of 0.1V to VDD. Low power and small size make the RS1430B ideal for portable and battery-operated systems. It is also a perfect fit for remote data-acquisition modules, simultaneous multichannel systems, and isolated data acquisition. The RS1430B is available in an MSOP8 package. 2 APPLICATIONS • Automotive Navigation • FA or ATM Equipment • Industrial Controls • Robotics • Battery-Operated Systems • Device Information (1) PART NUMBER RS1430B PACKAGE BODY SIZE (NOM) MSOP8 3.0mm×4.9mm (1) For all available packages, see the orderable addendum at the end of the data sheet. Instrumentation and Control Systems SAR REF RS1430B DOUT +IN S/H CDAC Comparator IN Serial Interface DCLOCK CS/SHD N REV A.0 1 / 29 www.run-ic.com PDF
Документация на серию RS1430 

Дата модификации: 31.05.2024

Размер: 3.76 Мб

29 стр.

    Товары серии RS1430

    Наименование i Упаковка
    RS1430B (RUNIC)
     
    RS1430BXM (RUNIC)