Серия логических ИС RS244

Runic

Общие характеристики

 Раздел Логическая ИС
Тип логики
Кол-во узлов
Диапазон напряжений питания
Номинальное напряжение питания
Задержка прохождения сигнала вход-выход
Входной гистерезис
Максимальный выходной ток
Максимальный входной ток
Рабочая температура

Документация на серию RS244

RS244 Octal Buffer/Driver With 3-State Outputs FEATURES • • • • Power-Supply Range:1.65V to 5.5V VCC Isolation: If VCC is at GND, Both Ports are in the High-Impedance State IOFF: Supports Partial-Power-Down Mode Operation Extended Temperature: -40°C to +125°C APPLICATIONS • • • • DESCRIPTION This RS244 is an octal non-inverting buffer/driver with 3state outputs. The 3-state outputs are controlled by the ̅̅̅̅ and 2OE ̅̅̅̅. A HIGH on OE ̅̅̅̅ causes output enable inputs 1OE the outputs to assume a high impedance OFF-state. VCC supporting operating voltage from 1.65 V to 5.5 V. To ensure the high-impedance state during power up or power down, ̅̅̅̅ OE should be tied to VCC through a pullup resistor, the minimum value of the resistor is determined by the current-sinking capability of the driver. Handset Smartphone Tablet Desktop PC Device Information PART NUMBER RS244 (1) REV A.2 PACKAGE (1) BODY SIZE (NOM) TSSOP20(20) 6.50mm×4.40mm SOP20(20) 12.80mm×7.50mm For all available packages, see the orderable addendum at the end of the data sheet. 1 / 14 www.run-ic.com PDF
Документация на серию RS244 

Дата модификации: 26.08.2022

Размер: 562.5 Кб

14 стр.

    Товары серии RS244

    Наименование i Упаковка Корпус
    RS244YS20 (RUNIC)
     
    		в ленте 1500 шт SOP-20
    RS244YTSS20 (RUNIC)
     
    		в ленте 4000 шт TSSOP-20