Серия операционных усилителей RS844x

Общие характеристики

Документация на серию RS844x

RS844X 32V, 3.8MHz Rail-to-Rail Output CMOS Operational Amplifier 1 FEATURES 3 DESCRIPTIONS  HIGH GAIN BANDWIDTH: 3.8MHz The RS844X families of products offer high voltage  INPUT OFFSET VOLTAGE: ±0.8mV (32V) operation and rail-to-rail output, as well as (Typical) excellent speed/power consumption ratio, providing an  QUIESCENT CURRENT: 0.44mA/Amp excellent bandwidth (3.8MHz) and slew rate of 15V/us.  Rail to Rail Output The op-amps are unity gain stable and feature an ultra-  Supply Range: 3V to 32V low input bias current.  SPECIFIED UP TO +125°C  Micro SIZE PACKAGES: SOT23-5, SOP8, MSOP8, SOP14, TSSOP14 The input can operate normally within the negative power rail to 1.5V below of the positive power rail. Input signals beyond the supply rails do not cause phase reversal. The RS844X families of operational amplifiers 2 APPLICATIONS  SENSORS  PHOTODIODE AMPLIFICATION  ACTIVE FILTERS  TEST EQUIPMENT  DRIVING A/D CONVERTERS are specified at the full temperature range of −40°C to +125°C under single power supplies of 3V to 32V or dual power supplies of ±1.5V to ±16V. Device Information (1) PART NUMBER PACKAGE BODY SIZE(NOM) RS8441 SOT23-5 2.90mm x 1.60mm SOP8 4.90mm x 3.90mm MSOP8 3.00mm x 3.00mm SOP14 8.65mm x 3.90mm TSSOP14 5.00mm x 4.40mm RS8442 RS8444 (1) For all available packages, see the orderable addendum at the end of the data sheet. REV A.1.1 1 / 19 www.run-ic.com  PDF

Документация на серию RS844x 

Дата модификации: 01.03.2024

Размер: 891.6 Кб

19 стр.

• найти RS844x.pdf

Товары серии RS844x