Серия DC-DC модульных преобразователей DP_7200

SDAPO

Общие характеристики

 Раздел DC-DC модульные преобразователи
Серия
Монтаж
Выходная мощность
Количество каналов
Входное напряжение
Параметры выходов
Возможности
Комплекс защит
Номинальное входное напряжение
Напряжение 1 выхода
Ток 1 выхода
Напряжение изоляции вход-выход
Размер 56×19×14 мм
Рабочая температура

Документация на серию DP_7200

DP7200 SERIES 52V Boost Converter Module By DESCRIPTION 52V Boost Converter Module (Isolation Type) FEATURES  Small SIL package  Suitable for IEEE802.3af/at compliant PSEs  Industrial Temperature  High efficiency (>92%)  Input voltage range 10V to 30V  Minimal external components required  Short-circuit and Thermal protection  Adjustable Output (44V to 56V)  1500V isolation (input to output)  Sdapo “design-in” assistance 2. Description The DP7200 module is a low noise DC/DC boost converter, designed to generate the higher voltages required for IEEE802.3 PSE applications from lower voltage supplies. This module provides exceptional efficiency (>92%) while providing full compatibility with the IEEE 802.3af/at power and isolation requirements. The module accepts a wide DC voltage input range, from 10V to 30V. The input voltage is then boosted to generate the higher voltages required to power any IEEE802.3af/at PSE circuits (including those supplied by Sdapo). The DP7200 provides a regulated adjustable output, of between 44V and 57V. DP7200 has been designed to provide an ideal solution for powering the Sdapo DP6100 PSE module from a vehicle battery, 12V plug-top PSU or other commonly available power supplies. Its low cost, small footprint, high efficiency and in-built isolation make it an extremely versatile DC-DC boost converter for a wide range of potential applications. www.sdapo.net -1- PDF
Документация на DP7200 

Subject:

Дата модификации: 24.07.2025

Размер: 514.7 Кб

7 стр.

    Товары серии DP_7200

    Наименование i Упаковка
    DP7200 (SDAPO)