Серия DC-DC модульных преобразователей SDUT50-48XXLD

Shineting

Общие характеристики

 Раздел DC-DC модульные преобразователи
Монтаж
Выходная мощность
Количество каналов
Входное напряжение
Комплекс защит КЗ, перегрузки, перенапряжения, от пониженного входного напряжения
Номинальное входное напряжение
Напряжение изоляции вход-выход
Размер 50.8×25.4×11.8 мм
Рабочая температура

Документация на серию SDUT50-48XXLD

DC/DC Converter SDUT50-48XXLD ⚫ Wide 2:1 input voltage range ⚫ High efficiency up to 92% ⚫ I/O isolation test voltage 1.5k VDC ⚫ Input under-voltage protection, output short circuit, over-current, over–voltage protection ⚫ Operating ambient temperature range: -40℃ to +105℃ ⚫ No-load power consumption as low as 0.048W ⚫ Six-sided metal shielding package ⚫ Input reverse polarity protection available with chassis (A2S) or DIN-Rail mounting (A4S) version ⚫ RoHS Industry standard pin-out 3-Year Warranty Description SDUT50-48XXLD series of isolated 50W DC-DC converter products with a wide 2:1 input voltage range. They feature efficiencies up to 92%, input to output isolation is tested with 1500VDC and the converter safety operate ambient temperature of -40℃ to +105℃, input under-voltage protection, output short-circuit, over-current, over-voltage protection. They are ideally and widely used in applications such as industrial control, electric power, instruments and communications. Selection Guide Certification Part No. Input Voltage (Vdc) Nominal (Range) Input Voltage (Vdc) Max. SDUT50-4803LD Output Current （mA） Full Load Efficiency (%) Min./Typ. Capacitive Load(µF) Max. 3.3 10000/0 89/91 27000 5 10000/0 89/91 18900 12 4167/0 90/92 3700 SDUT50-4815LD 15 3333/0 90/92 2000 SDUT50-4824LD 24 2083/0 90/92 1000 SDUT50-4805LD / Output Voltage (Vdc) SDUT50-4812LD 48 (36-75) 80 Notes: ①Use “H” suffix for heat sink mounting, “A2S” suffix for chassis mounting and “A4S” suffix for DIN-Rail mounting. We recommend to choose modules with a heat sink for enhanced heat dissipation and applications with extreme temperature requirements; ②The minimum input voltage and starting voltage of A2S and A4S Model are 1VDC higher than those of DIP package due to input reverse polarity protection function; ③Exceeding the maximum input voltage may cause permanent damage; ④Efficiency is measured at nominal input voltage and rated output load; efficiencies for A2S and A4S Model’s is decreased by 2% due to the input reverse polarity protection circuit. 1 PDF
Документация на SDUT50-4803LD 

Дата модификации: 04.09.2024

Размер: 2.55 Мб

7 стр.

    Товары серии SDUT50-48XXLD

    Наименование i Упаковка Выход U1 I1 Шум КПД
    SDUT50-4803LD (SHINET)
     
    		1 шт
    SDUT50-4805LD (SHINET)
     
     
    SDUT50-4812LD (SHINET)
     
     
    		 1 шт
    SDUT50-4815LD (SHINET)
     
     
    SDUT50-4824LD (SHINET)